SOMOGYI ELEKTRONICS SF 40 BK-M Fan Standing Instruction Manual

June 5, 2024
SOMOGYI ELEKTRONICS

SF 40 WH/M
SF 40 BK/M


instruction manual

| STRUCTURE (Figure 1.)
---|---
1.| grid fixing holders
2| grid fixing screw and nut
3.| front part of the grid
4.| blade fixing screw
5.| fan blade
6.| grid fixing plastic nut
7.| rear part of the grid
8.| motor
9.| stage switch
10.| oscillation switch
11.| fixing screw
12.| grip
13.| power cable
14.| upper pan of the stand
15.| height fixing screw
16.| lower part of the stand
17.| base fixing module
18.| plastic bases

Safety and maintenance

STANDING FAN
IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!

WARNINGS

  1. Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language.
  2. This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.
  3. Make sure that the appliance has not been damaged in transit.
  4. Do not operate the device with a program switch, timer or separate remote control systems, etc. used together, which can switch on the device independently, because possible covering or incorrect placement of the device may cause an accident.
  5. Do not use in locations where flammable vapors or explosive dust may be present. Do not use near flammable materials or in potentially explosive atmospheres.
  6. Operate only under constant supervision.
  7. Do not operate unattended in the presence of children.
  8. Only for indoor use, in a dry place. Protect from humidity (e.g. bathrooms, swimming pools).
  9. It is PROHIBITED to use the unit near bathtubs, basins, showers, swimming pools or saunas.
  10. It is prohibited to use the appliance in motor vehicles or in confined spaces (<5 m 2 ) such as elevators.
  11. If you are not planning to use the appliance for an extended period of time, switch it off, unplug it,
  12. Always power off the appliance before relocating it.
  13. Only move by holding the grip.
  14. If any irregular operation is detected (e.g. unusual noise or burnt odor from unit), immediately switch it off and remove the power plug.
  15. Make sure that no foreign objects or liquid can enter the appliance through the openings.
  16. Protect from dust, humidity, sunlight and direct heat radiation.
  17. Power off the unit by unplugging it from the electric outlet prior to cleaning.
  18. Before removing or reinserting the protective grid, power off the fan by pulling out its power plug.
  19. Do not touch the unit or the power cable with wet hands.
  20. The appliance may only be connected to 230 V~ / 50 Hz electric wall outlets.
  21. Unwind the power cable completely.
  22. Do not lead the power cable over the appliance.
  23. Do not lead the power cable under carpets, doormats etc.
  24. The appliance should be located so as to allow easy access and remove of the power plug.
  25. Lead the power cable so as to prevent it from being pulled out accidentally or tripped over.
  26. Due to continuous improvements the design and specifications may change without any prior notice.
  27. The actual instruction manual can be downloaded from www.somogyi.hu.
  28. We don’t take the responsibility for printing errors and apologize if there’s any.
  29. The unit is intended for household use. No industrial use is permitted.

Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.

ASSEMBLY OF THE DEVICE

  1. Insert the lower part of the stand (16) into the plastic base mounting module (17). Make sure it fits properly and is secured in place.
  2. Attach the 4 pcs plastic bases (18) to the base fixing module (17), until it clicks.
  3. Loosen the height fixing screw (15), pull out the upper part of the stand (14) until the desired height, then fix with the screw.
  4. Place the motor on the stand, secure it with the screw (11).
  5. Insert the rear part of the grid (7) on the motor, so that the 2 pcs fix grid fixing holders are at the bottom.
  6. Then screw in the grid fixing plastic nut (6).
  7. Place the blade (5) on the motor shaft and secure it with the blade fixing screw (4).
  8. Insert the lower edge of the grid’s front part (3) to the 2 pcs fix grid fixing holder, then fix to the rear part with the foldable grid fixing holders.
  9. Finally, secure the front and rear part of the grid at the top with the small screw and nut (2).

CLEANING

In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.

  1. Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet.
  2. Attention! When the fan is powered off, remote the front part of the grid.
  3. Use a slightly moistened cloth to clean the unit’s exterior. Do not use any aggressive cleaners. Avoid getting water inside of and on the electric components of the appliance.
  4. Attention! When the fan is powered off, reinsert the protective grid on the fan.
  5. Reinstall the fan.

TROUBLESHOOTING

Malfunction Possible solution
The fan does not switch on Check the power supply

Check the switch
The fan does not oscillate| Check the oscillation switch

DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

STANDING FAN

FEATURES

  • nominal blade diameter: 40 cm
  • conveniently switchable stages with the rotary switch on the motor
  • 3 speed stages
  • switchable oscillation, 80°
  • adjustable head tilt angle (+15°)
  • adjustable height 94-124 cm

OPERATION OF THE FAN

The fan can be switched on and off with the rotary stage switch (9), and the desired speed stage can be set (1, 2, 3). To activate the oscillation, push the switch (10) down and to deactivate it, pull it upwards.
The fan head can be adjusted horizontally or slightly upwards. To do this, simply grasp the motor and tilt it back until it clicks.

TECHNICAL SPECIFICATION

power supply ………………………………………………………… 230 V ~ / 50 Hz / 45 W
protection class …………………………………………………….. II.
maximal air mass flow rate …………………………………… F = 61,00 m3/min
input voltage of fan ………………………………………………. P = 34,70 W
operating value ………………………………………………………. SV = 1,76 (m3/min)/W
energy consumption in standby mode …………………… PSB = 0,00 W
fan sound power level …………………………………………….. LWA = 56,15 dB(A)
maximum airspeed …………………………………………………. c = 3,12 m/sec
measurement standard for operating value ……………… IEC 60879:1986 (corr. 1992)
nominal blade diameter …………………………………………… 40 cm
height of fan (adjustable) ………………………………………… 94 – 124 cm
overall size ……………………………………………………………… 70x124x70 cm
weight of fan ………………………………………………………….. 2,9 kg

Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488, Fax: +40 264 406 489 • www.somogyi.ro
Producător: Somogyi Elektronic Kft

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

SOMOGYI ELEKTRONICS User Manuals

Related Manuals