DONGGUAN A10 Mini Portable Bluetooth Speaker User Manual

DONGGUAN A10 Mini Portable Bluetooth Speaker

What’s included

• The above pictures are just for reference only.

Attention

1. Use original or certified cables
2. Don’t expose to liquids
3. Don’t disassemble
4. Avoid dropping
5. Avoid extreme temperatures
6. Don’t listen to music for a long time in a high-volume environment.

At a Glance

Quick Start Guide

• Turn on/off

• Pair with you device

TWS Connect

• Turn on the two speakers and enter the Wireless mode, double-click one of the “M keys to connect the two speakers.

• After connecting A10 with a wireless device, you can play music to realize double surround sound.

Using Your Speaker

•   Turn on/off
  Press and hold the Power on/ off button for 2 seconds, when the LED rings around the buttons rapidly flash bule, the speaker is in pairing mode Press the Power on/ off button again to turn on/ off the LED ring. Press and hold again to turn off the speaker.

• Select mode
  Press M (Multi-function button) to select mode between Bluetooth Mode/AUX Mode/SD Card Mode Inserting an SD card will automatically switch to SD card mode.

Wireless mode

1. Turn on the speaker.
2. Turn on Wireless on smartphones or other devices.
3. Find Wireless’s name on the waitlist and tap it for connection

Play/ pause

Answer/end call Press Play/ pause for an answering a coming call, double press to end the call

Force disconnect WirelesS Press and hold play/pause to disconnect Wireless, the speaker enters pairing mode

Volume up/ down Press to volume up/down

Next track/Previous track Press and hold for the next/previous track

When turned on, the speaker will automatically connect to the last connected device if available. If not, the speaker will enter pairing mode. To pair a different device, press and hold the play/ pause button for 3 seconds to re- enter pairing mode. Then repeat the pairing steps

Having connection problems?
Remove the speaker from your device’s Bluetooth history, ensure it is less than 3 feet away then try pairing again.

AUX-In mode

Connect the speaker with provided 2 in 1 cable with a Micro USB end, 3.5mm audio jack plugging other devices. Press M(Multi-function button) to enter AUX mode. When using AUX mode, control audio playback via the connected device.

SD card mode

In SD card mode, control audio play track as same as Bluetooth mode

• Support a class 4 or above micro SD card, up to 32G8
• support audio formats: MP3, WMA, WAV, etc.

Charge your Speaker

Please charge your speaker when the speaker gives tones.

Use the included USB cable to charge your speaker and make sure it is fully charged before first use

Specifications

FCC Caution

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will did not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>