karpenter BED Attach Side Rail (C)Headboard Instructions

BED Attach Side Rail (C)Headboard
Instructions Manual 

ASSEMBLING INSTRUCTION

BED

Pre Assembly :

• Please read all instructions before beginning assembly
• Place all parts on a carpet or foam in the shipping box. Find the letter (A, B,C,…) on each part and check with the below part list to ensure we have all components.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
• This cart requires one person to do the assembly.

Parts Included :

Hardware Enclosed :

Assembly Instructions :

1. Lay all components (A, B, C,…) onto a clean smooth surface like carpet or cardboard.

2. Attach Side Rail (C) to the Headboard (A). Please carefully note
   2.1. All letters at the component indicate homing destination so as not to misplace components.
   2.2. Please hang the brackets to the Hexagonal bolts (E) and tighten them by using Wrench (F) (see below diagram).
   

3. Attach Footboard (B) to the components.
   3.1. Please note the indicating letters for homing guidance.
   3.2. Please hang the brackets to the Hexagonal bolts (E) and tighten them by using Wrench (F) (see below diagram).
   

4. Attach Slats (D) to the whole body. Use the wood stopper to guide.
   ASSEMBLY IS COMPLETED

Care Instructions :

• Hardware may loosen over time. Periodically check to make sure all components are tight.
  Re-tighten if necessary.

• Dust with a soft dry cloth.

• Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with an absorbent cloth.

• For indoor use only

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>