KARPENTER SO16EU Single Bed User Manual
- June 5, 2024
- KARPENTER
Table of Contents
KARPENTER SO16EU Single Bed
Pre Assembly :
- Please read all instructions before beginning assembly
- Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C, … ) on each part and check with below part list to ensure we have all components.
- Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
- This cart requires one people to do assembly.
Parts Included :
Hardware Enclosed :
Assembly Instructions
- Lay all components (A, B, C, … ) onto clean smooth surface as carpet or cardboard.
- Attach Side Rail (C) to the Headboard (A). Please carefully note
- All letters at component that indicates homing as not to misplace components.
- Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F)
- Attach Footboard (B) to the components.
- Please note the indicating letters for homing guidance.
- Please hang the brackets to the Hexagonal bolts (E) and tighten by using Wrench (F) (see below diagram).
- Attach Slats (D) to the whole body. Use the wood stopper to guide.
ASSEMBLY IS COMPLETED
Care Instructions
-
Hardware may loosen over time. Periodically check to make sure all components are tight. Re-tighten if necessary.
-
Dust with soft dry cloth.
-
Avoid abrasive cleaners.
If a cleaner is needed, use a mild-cleaner spray and blot with an absorbent cloth. -
For indoor use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>