KARPENTER KP08 Bed Instruction Manual

KP08 Bed
Instruction Manual

ASSEMBLING INSTRUCTION

Pre Assembly :

Please read all instructions before beginning assembly
Place all parts on a carpet or foam in the shipping box. Find the letter (A,B, C,…) or the number (1,2,3,…) on each part and check with the below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
This cart requires one person to do the assembly.

Parts Included :

Hardware Enclosed :

Assembly Instructions :

1. Lay all components (A, B, C,…) onto a clean smooth surface like carpet or cardboard.

2. Attach Side Rail (C) to the Headboard (A).
   2.1. Please carefully note all letter or number at the component that indicates homing destination as not to misplace components.
   2.2. Please hang the brackets to the Hexagonal bolts (aa) and leave the bolts a little bit loosen (see below diagram).

3. Attach Footboard (B) to the Side Rail (C).
   3.1. Please note the indicating letter for homing guidance.
   3.2. Position the Side Rail (C) aligned / straight with the Footboard (B) and the Headboard (A).
   3.3. Make sure the bracket is aligned with the Hexagonal bolts (aa).
   3.4. Hang the bracket to the Hexagonal bolts (aa), leaving the bolts a little bit loosen.

4. Make sure to tighten all bolts by using Wrench (bb).

5. Attach Extra Leg (E) to the Center Rail (D). See diagram below

6. Attach Center Rail (D) with Extra Leg (E) to bed. Please DO NOT attach Center Rail (D) without first securing Extra Leg (E) to the whole body otherwise Center Rail (D) can break.

ASSEMBLY IS COMPLETED

Care Instructions :

Hardware may loosen over time. Periodically check to make sure all components are tight. Re-tighten if necessary.
Dust with a soft dry cloth.
If a cleaner is needed, use a mild-cleaner spray and blot with an absorbent cloth.
For indoor use only.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>