Kingston Technology CL002WA HyperX Cloud II Wireless Adapter User Manual
- June 5, 2024
- Kingston Technology
Table of Contents
Kingston Technology CL002WA HyperX Cloud II Wireless Adapter
Product: HyperX Cloud II Wireless Headset / Brand: HYPERX / Model: CL002 Product: HyperX Cloud II Wireless Adapter / Brand: HYPERX / Model: CL002WA
Overview
[Use the following line drawings:
- ¾ view of headset without microphone
- Bottom view of headset (labels A-F)
- Detachable boom microphone with mic foam (label G-H)
- Top-down view of USB wireless adapter (labels I-K)
- USB charge cable (label L)
[Reference images:
- A. Status LED
- B. Power / 7.1 mode button
- C. Mic mute / mic monitoring button
- D. USB-C charge port
- E. Microphone port
- F. Volume wheel
- G. Detachable microphone
- H. Microphone mute LED
- I. USB adapter
- J. Wireless pairing pin hole
- K. Wireless status LED
- L. USB-C charge cable
Usage
[Use the following line drawings:
- ¾ view of headset with microphone attached
- Wireless adapter
Arrow pointing from the USB adapter to PC USB port and PS4 USB port
[Reference images:
- Connect the wireless adapter to your device
- Power on the headset
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control panel [Use Windows 10 1903 Setup speaker icon menu graphic and sound settings menu graphic]
[Reference images:
Playback Device
-
Set Default Device to “HyperX Cloud II Wireless”
[Use Windows OS playback sound control panel menu graphic for selecting HyperX Cloud II Wireless as Default Device] [Reference image: -
Right click on “HyperX Cloud II Wireless” and click on Configure.
-
Select 7.1 Surround to configure your setup and click next.
[Use Windows OS playback sound control panel menu graphic for selecting speaker setup] [Reference image:
Recording Device
Set Default Device to “HyperX Cloud II Wireless”
[Use Windows OS recording sound control panel menu graphic for selecting
HyperX Cloud II Wireless as Default Device] [Reference image:
Setting up with PlayStation 4
- Settings > Devices > Audio Devices
- Input Device: USB Headset “HyperX Cloud II Wireless”
- Output Device: USB Headset “HyperX Cloud II Wireless”
- Output to headphones: All Audio
[Use the following line drawing:
- Bottom view of headset with left earcup only
- Small label “Status LED” with an arrow pointing to the status LED on the left earcup
- Small label “Power / 7.1 mode button” with an arrow pointing to the power button on the left earcup
- Small label “Mic mute / mic monitoring button” with an arrow pointing to the mic mute button on the left earcup
Reference image:
Status LED
| Status | [LED] |
|---|---|
| Pairing | Flash green and red every 0.2s |
| Searching | Slow breathing green |
Connected*
| 90% — 100%: Solid green
15% — 90%: Blinking green
< 15%: Blinking red
Battery level indication
Power / 7.1 mode button
- Power on/off – Hold button for 3 seconds to power headset on/off
- 7.1 mode toggle – Press button to toggle 7.1 on/off
Mic mute / mic monitoring button
- Mic mute toggle – Press button to turn the mic mute on/off
- Microphone mute LED On – Mic muted
- Microphone mute LED Off – Mic active
- Mic monitoring toggle – Hold button for 3 seconds to toggle mic monitoring on/off
[Use the following line drawing:
- Zoomed-in crop of the right earcup with focus on volume wheel
- Small label “Volume wheel” with an arrow pointing to the volume wheel on the right earcup
Reference image:
Volume wheel
Scroll up and down to adjust volume level.
Charging
It is recommended to fully charge your headset before first use.
Use the following line drawing:
- Connect the USB-C charge cable USB-A end to PC and USB-C end to headset USB charge port
Reference images:
| Status [LED] | Charge Status |
|---|---|
| Fully Charged | Solid green |
| 15% — 99% | Breathing green |
| < 15% | Breathing red |
HyperX NGENUITY Software
Download software and latest firmware updates at
hyperxgaming.com/ngenuity
[NGENUITY logo]
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at
hyperxgaming.com/support/headsets
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
Battery/TX Power Info
Battery Information
Contains 3.7V, 1500mAh Li-ion Battery, 5.55Wh
Cannot be replaced by user
Frequency & TX Power Information
Frequency Bands: 2.4GHz (TX Power: <7dBm)
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED Statement:
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.