eufy T8131C21 Security 2k Cam Solo Pro User Guide

: June 5, 2024
: Eufy

Table of Contents

eufy T8131C21 Security 2k Cam Solo Pro
WHAT’S INCLUDED
PRODUCT OVERVIEW
CHARGING
SETTING
MOUNTING
- Select a Location
Mount eufyCam Solo / Solo Pro
NOTICE
- The following importer is the responsible party:
Declaration of Conformity
Customer Service
- Warranty
Call Us
- United States
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eufy T8131C21 Security 2k Cam Solo Pro

eufy-T8131C21 -Security-2k-Cam-
Solo-Pro-PRODUCT

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo @EufyOfficial are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

WHAT’S INCLUDED

eufy-T8131C21 -Security-2k-Cam-Solo-Pro-
FIG-1

PRODUCT OVERVIEW

eufyCam Solo / Solo Pro

LED Indicator
Camera Lens
Microphone
Motion Sensor
Photosensitive Sensor
SD Card Slot
Micro USB Charging Port
Mounting Hole
SYNC Button
Press for 2s to enter setup mode
Press for 10s to reset

CHARGING

YOUR EUFYCAM SOLO / SOLO PRO

eufyCam Solo / Solo Pro comes with a built-in battery.
Before setup, fully charge your eufyCam Solo / Solo Pro using the provided micro USB cable.

Recommended

Normal Charging

Solid blue	Charging
Fully charged	Off

SETTING

UP EUFYCAM SOLO / SOLO PRO

Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
Sign up eufy Security account. Go to the app homepage. Tap Add Device and add eufyCam Solo / Solo Pro to the system.
Follow the on-screen instructions to complete the setup.

Note: Make sure your eufyCam Solo / Solo Pro is connected to the HomeBase.

LED Status

Status	LED Indicator
Ready for setup	Flashing blue
Successfully paired	Off
Live streaming or recording	Solid red (When LED is enabled)
An alarm triggered	Flashing red
Firmware updating	Flashing blue and red alternately

MOUNTING

Select a Location

Select a Location

eufyCam Solo / Solo Pro can be mounted on a wall or ceiling. Select a location where you can get the desired view.
We recommend hanging it 7-10 ft (2-3 m) above the ground.

Mount eufyCam Solo / Solo Pro

eufyCam Solo / Solo Pro can be mounted both outdoors and indoors.

Turn the knob of the mounting bracket clockwise to loosen and disassemble it.
Place the mounting bracket against the wall. Drill holes with a 15/64 inch (5.99 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
Firmly screw the base of the mounting bracket onto the wall. Fasten the ball knob of the bracket to the base of the bracket.
Tighten eufyCam Solo / Solo Pro to the mounting bracket. Rotate the eufy Indoor Cam to adjust the view and check it using the live stream which you can access in the eufy Security app.

eufyCam Solo / Solo Pro can be also installed on the ceiling. Follow steps 1-4 mentioned above to install it.
You are now all set to use your eufyCam Solo / Solo Pro.

NOTICE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20 cm.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party:

Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-800-988-7973

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
For the declaration of conformity, visit the Web site: https://www.eufylife.com/.
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or too wet environment.
The suitable temperature for T8130 and accessories is 0°C-40°C.
When charging, please place the device in an environment that has a normal room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use product that maintains a 20cm distance between the device and the human body.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Wi-Fi Operating Frequency Range: for CE-RED: 2412~2472MHz; Wi-Fi Max Output
Power: 16.83dBm(EIRP)
For FCC-ID 2412~2462MHz; Wi-Fi Max Output Power:21.47dBm
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output
Power: for CE-RED5.66dBm (EIRP), for FCC-ID: 7.054dBm

The following importer is the responsible party (contact for EU matters only)

Importer: Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham,, B11 2AA, United Kingdom

This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Prope disposal and recycling help protect natural resources, human health and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

this device may not cause interference.
this device must accept any interference, including interference that may cause undesired operation of the device.”

IC RF Statement