TownSteel TSM-3200 E-CRONUS Door Locks User Manual
- June 5, 2024
- TownSteel
Table of Contents
TownSteel TSM-3200 E-CRONUS Door Locks
INSTALLATION INSTRUCTIONS
PREPARE DOOR PER TEMPLATE PROVIDED. INSTALL MORTISE AS SHOWN. GENTLY GUIDE WIRE HARNESS INTO MORTISE POCKET AND DUT THE OVAL HOLE IN THE BACK DO NOT PULL ON HARNESS.
INSTALL TRIM (NOTE- DO NOT USE POWER TOOLS TD INSTALL THE L0CK)
- Install inside and outside spindles- screw together- do not overtighten
- Install outside lever assy- put in the 2 mounting posts through holes in the mountin9 plate
- Install inside lever assy- fasten with the 2 mounting screws
- Desperate levers to ensure lock functions properly
- Put on roses- press in place
Optional Install cylinder, collar and spring and secure with set screw under face plate.
TRIM INSTALLED AND MORTISE CABLE ROUTED.
PLACE THE READER IN POSITION AND GUIDE THE READER CABLE THROUGH THE OVAL HOLE DO NOT PULL ON THE CABLE. PLACE READER FLUSH TO THE DOOR FACE. INSTALL THE CYLINDER.
PUT ON BACK PLATE, GUIDE WIRES UNDER THE GUARD & THROUGH THE OVAL SLOT ON THE BACK PLATE. SECURE WITH 4 SCREWS.
PLUG IN MORTISE CABLE AND READER CABLE. PUSH EXCESS WIRE HARNESS INTO THE DOOR CUTOUT. PLACE BATTERY TRAY FLUSH TO DOOR FACE. SECURE WITH 4 MOUNTING SCREWS. PLACE BATTERY COVER DENVER BATTERY TRAY AND SECURE WITH 1 SCREW
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>