Bekey WC303 31 Wireless Charger User Manual
- June 5, 2024
- Bekey
Table of Contents
WC303 31 Wireless Charger
User Manual
WC303 31 Wireless Charger
Thank you for choosing the 3-in-1 Wireless Charger for rapid wireless charging of your portable devices. We recognize the stress and annoyance of being unable to find a charging cable or having a damaged charging port. So we created the WC303 3 in 1 Smart Wireless Charger, a quick and easy way to stay connected and powered up no matter the situation. This convenient device allows you to easily charge your wireless compatible devices by simply placing them on the charging pad or charging stand. And put your original iWatch charger into the holder, and then charge your iWatch. For optimum performance and safety, please read this manual carefully before using this product.
How to Use
Setting Up The 3 in 1 Smart Wireless Charging Stand
Plug the provided TYPE-C USB Cable into the charging Stand TYPE-C USB port.
Plug the other end into a local power source(Suggest using QC 3.0 charger).
You will see the LED indicator on the charging stand turn BLUE, GREEN, LIGHT
BLUE, and then turn off. This means that it is ready for use.
1. Wireless Charging Pad
Charging Your Mobile Phone/Airpods Devices Using The Charging Pad
Place your phone/Airpods on the Wireless charging pad. The RIGHT indicator
light will turn solid blue and your devices will light up indicating that
charging has begun successfully.
If Samsung mobile phone is charged full, the indicator light will turn in
Green. Other devices when charged full, will still in Blue.
If charging does not begin. Adjust the positioning of your phone on the
charging pad.
If the RIGHT LED indicator light of the charging pad start flashing light blue
after your device is placed on it. Then you should remove your devices, unplug
the 3-in-1 Smart Wireless Charging Stand, and repeat the setup process.
Note: If after you have set up the 3 in 1 Smart Wireless Charging Stand
again, and the RIGHT LED light continues Flashing LIGHT BLUE when your device
is placed on it. Then your Device is likely not compatible with wireless
charging.
2. Charging Stand
Charging Your Mobile Devices Using The Wireless Charging Stand
Place your phone on the wireless charging stand. The LEFT indicator light will
turn solid blue and your devices will light up indicating that charging has
begun successfully. You can charge your smartphone both horizontally or
vertically. If Samsung mobile phone is charged full, the indicator light will
turn in Green. Other devices when charged full, will still in Blue.
If charging does not begin. Adjust the positioning of your phone on the
charging Stand.
If the LEFT LED indicator light of the charging stand starts flashing light
blue after your device is placed on it. Then you should remove your devices,
unplug the 3-in-1 Smart Wireless Charging Stand, and repeat the setup process.
Note: If after you have set up the charging pad again, and the LEFT LED
light continues Flashing LIGHT BLUE when your device is placed on it. Then
your Device is likely not compatible with wireless charging.
3. iWatch Charger holder
You can put your original iWatch Charger through the Front hole.
Press the cable into the gap.
Wind the excess cable into the slot for storage.
Connect the iWatch USB to the USB A port.
Hand your iWatch to the holder, and match it with it’s charger.
FCC Statement
This device complies with part 18 of the FCC Rules. Operation is Subject To
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not explicitly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and candidates radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Increase the separation between the equipment and any other radio device.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.