Guangdong Bekey Technology STG-6761-KB Wireless Charging Stand User Manual
- June 6, 2024
- Guangdong Bekey Technology
Table of Contents
WIRELESS
CHARGING STAND
User Manua
FCC ID:2AVCH-STG-6761-KB
Lmportant Notes
Please Note: Improper use may result in product damage. a decrease in your
phone’s battery life, and loss of charging capacity not covered by the
manufacturer’s warranty.
Be sure to plug in the wireless charging stand before use.
Use only the provided power cable to power on the wireless charging stand.
Don’t place your phone on the wireless charging stand while the phone is
plugged in and charging.
Don’t drop, knock, disassemble or attempt to repair the wireless charging
stand by yourself.
Keep out of reach of children.
Don’t immerse the wireless charging stand in water or make it wet
Don’t expose the wireless charging stand to a heat source like fire or heater.
Product Care
| Use original or certified cables.
---|---
| Avoid overloading devices.
| Don not disassemble.
| Avoid exposure to liquids.
| Avoid extreme temperatures.
Product Specifications
Model: STG -6761- KB
Input:9V=2.5A
Wireless Charging Stand:10W/ 7.5W/ 5W
AirPods Wireless Charger: 3W
TYPE-C Port Output SW max
USB Port Output: SW max
TYPE-C+USB Total Output: 5W max
Wireless Charging Distance: s 8mm
Wireless Charging Efficiency: 2 70%
Supports both USB and USB-C Apple Watch magnetic charging cable.
Supports 18W USB-C PD or QC3.0 charger
Supports 5V/2A conventional USB charger
Product Dimensions:122mm x 82mm x 109mm
*Apple watch original USB/USB-C magnetic charging cable not included. Output 2 and Output 3 total output SV/lA
Package Contents
| 1 x Wireless Charging Stand | 1 x USB-C Charging Cable | 1 x Manual |
|---|---|---|
| 1x Charger |
For best results, please use a comparable 18W USB-C PD or QC3.0 charger. If a conventional 5V/2A USB charger is used, the total wireless charging output is limited to Max.10W. You may experience slow charging if you attempt to charge multiple devices simultaneously.
Compatibility
- iPhone'” 8, iPhone’ 8 Plus, iPhone'” X, iPhone'” Xs, iPhone'” XR, iPhone'” Xs Max, Phone’ll, iPhone'” 11 Pro, iPhone'” 12
- Samsung Galaxy n’S9, S8, S8+, S7. S7 edge, S6, S6 edge. Note 5
- Google Nexus”‘ 4, 5, 6, Pixel 3, Pixel 3 XL
- Huawei TM Mate RS Porsche Design, Mate 20 Pro. Mate 20 RS Porsche Design
- Apple Watch’ series L 2,3, 4,5, 6
- Air Pods'” Pro, Air Pods'” 2
- Supports other models that are compliant with Qi wireless charging standards, such as wireless charging-based smartwatches, earbuds, and earphones.
How to Use
Setting Up The Wireless ChargingStand
Plug the provided TYPE-C USB Cable into the charging Stand TYPE-C USB port.
Plug the other end into a local power source(Suggest using QC 3.0 charger).
You will see the LED indicator on the charging stand turn BLUE, GREEN, and
then turn off. This means that it is ready for use.
Product Overview
NOTE: FOR BEST RESULTS Please use a comparable 18W PD or OC3.0 charger.
Apple Watch Charging Cable Setup
Please Note: Apple Watch’s original magnetic charging cable is not included.
Troubleshooting
Apple Watch not charging.
- Apple Watch can only be charged with the official magnetic charging cable that came with the watch, it cannot be charged on any other wireless charging surface of this charger. Charging cable is not included.
Phone not charging.
- Make sure to use an 18W PD or OC3.0 adapter if charging multiple devices at once.
- The phone case or ring holder is too thick, remove it before charging.
- Rest the phone in portrait mode, not landscape mode, to align with charging coils.
Smartwatch/Earbuds/Wireless device not charging.
- Make sure devices are compatible with 0 wireless charging technology.
- Make sure devices are aligned with charging coils.
Devices charging too slowly.
- Make sure to use an 18W PD or 0C3.0 adapter for best charging results, especially if charging multiple devices.
FCC Warning：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: The equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. During the operation of the
device, a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>