msi D1505 microATX Server Motherboard User Guide

D1505 microATX Server Motherboard

“`html

Specifications

• CPU and Cooler Installation: G52-S3652X1
• LAN Port: 25G SFP28
• USB Port: USB 3.2 Gen 1 Type-A
• Memory Support: DDR5 ECC and non-ECC UDIMMs
• Memory Speed: Up to 4800 MT/s (1DPC) and 3600 MT/s (2DPC)
• Maximum Memory Capacity: 32 GB per DIMM

Product Usage Instructions

CPU and Cooler Installation

To install the CPU and cooler on the G52-S3652X1, follow the
manufacturer’s instructions provided with the CPU and cooler.

Memory Installation

Follow these guidelines for memory installation:

1. Use only UDIMM memory.

2. Ensure at least 1 DDR5 DIMM is populated.

3. For maximum performance, install memory in pairs.

4. If populating only 1 DIMM in a channel, use the DIMMA2
   slot.

5. Populate the same type of DIMM in each channel, including size
   and number of ranks per DIMM.

6. Avoid other memory installation configurations.

FAQ

Q: What type of memory does the server board support?

A: The server board supports DDR5 ECC and non-ECC UDIMMs.

Q: What is the maximum memory capacity per DIMM?

A: The maximum memory capacity per DIMM is 32 GB.

Q: How should I populate the memory slots for optimal

performance?

A: Populate memory slots according to the recommended guidelines
provided in the user manual, ensuring paired installations and
matching DIMM types in each channel.

“`

G52-S3652X1 CPU and Cooler Installation

D1505

QUICK START GUIDE

25G SFP28 LAN Port

SFP28 LAN LED

GbE RJ45 Port (for mgmt.)

COM Port
UID LED Button

USB 3.2 Gen 1 Type-A Port

VGA Port

2
1
7 6
4 5

3

8

9

ID_BTN1

REAR_USB1 JPWR1
COM1 (U) JVGA1 (L)

LAN_LED1

JCOM1

MLAN_USB1

JSFP0

JSFP1

DIMMA1 DIMMA2 DIMMB1 DIMMB2

LED_L1

JIPMB1 RBP_I2C_1
LED_H1

JSEL_BMC1

PCIE_1

PCIE_2

JGPIO1

BMC_LED1

BMC_LED2

M2_1

BMC Flash
BMC_F1

BAT1 JP3

JUSB2

JNVME_SATA_SEL1 JNVME_SATA_SEL2

PCIE-SW1

BIOS Flash U65

JNVME4_SATA1

JP8

JP9

JNVME2 JNVME3

JTPM1 JNVME1_SATA2

JCI1 SYSFAN1

JP4 SYSFAN2 SYSFAN3 SYSFAN4 SYSFAN5 SYSFAN6 SATAPWR1 JPWR2

JFP1

JUSB1

CPU
Single Intel® Xeon® E-2400 Processor · Intel® Pentium® G7400/G7400T Processor

Front Panel Connector

24

23

JFP1

2

1

1

PWR_LED+

2

FP_PWR

3

No pin

4

SYS_ID_LED+

5

PWR_LED-

6

SYS_ID_LED-

7

HDD_ACT_LED+

8

SYS_FAULT_LED1-

9

HDD_ACT_LED-

10

SYS_FAULT_LED2-

11

PWR_BTN-

12

NIC#1_ACT_LED+

13

PWR_BTN_GND

14

NIC#1_ACT_LED-

15

RST_BTN-

16

SMB_SDA

17

RST_BTN_GND

18

SMB_SCL

19

SYS_ID_BTN-

20

CHASSIS_INTRUSION

21

WIRE_TEMP_SENSOR

22

NIC#2_ACT_LED+

23

REAR_ID_BTN-

24

NIC#2_ACT_LED-

FP_I2C_1 RBP_I2C_2

JPMBUS1

Connectors, Jumpers and LED Indicators

Name JPWR1 JPWR2 SATAPWR1 JNVME2~3 JNVME4_SATA1 JNVME1_SATA2 M2_1 PCIE_1 PCIE_2 SYSFAN1~6 JFP1 JTPM1 JCOM1 JGPIO1 JPMBUS1 FP_I2C_1, RBP_I2C_1~2 JIPMB1 JCI1 JUSB1 JUSB2 REAR_USB1
MLAN_USB1
JSFP0~1 LAN_LED1 COM1 JVGA1 JP3 JP4 JP8 JSEL_BMC1

Description 8-pin 12V power connector 24-pin main power connector 4-pin power connector Slimline SAS 4i connectors
Slimline SAS 4i connectors
M.2 slot (M Key, PCIe 4.0 x4, 22110/ 2280) PCIe 4.0 x 8 slot (Gen 4 x 4 signal from CPU) PCIe 5.0 x 16 slot (Gen 5 x 16 signal from CPU) Fan connectors Front panel header SPI TPM header COM port header GPIO header PMBus header I2C headers IPMB header Chassis intrusion header USB 3.2 Gen 1 header USB 3.2 Gen 1 Type-A port USB 3.2 Gen 1 Type-A ports (on rear side) GbE RJ45 port (for mgmt.) (upper, on rear side) USB 3.2 Gen 1 Type-A ports (lower, on rear side) 25G SFP28 LAN ports (on rear side) SFP28 LAN LEDs (on rear side) COM port (on rear side) VGA port (on rear side) CPLD power-on jumper (default pin1-2, disable) CMOS clear jumper (default pin1-2, normal) Password clear jumper (default pin1-2, normal) SPI switch jumper (default pin 2-3, normal)

Name JNVME_SATA_SEL1 JNVME_SATA_SEL2 BMC_LED1~2 LED_H1, LED_L1

Description JNVME_SATA1 SATA/NVMe signal select jumper (default pin 2-3, SATA) JNVME_SATA2 SATA/NVMe signal select jumper (default pin 2-3, SATA) BMC heartbeat LEDs Port 80 debug LEDs

Memory
The server board supports DDR5 ECC and non-ECC UDIMMs with memory speeds up to 4800 MT/s (1DPC) and 3600 MT/s (2DPC). It has a maximum capacity of 32 GB per DIMM.

DIMMB2 Channel B
DIMMB1

Channel A

DIMMA2 DIMMA1

Recommended Memory Population

Quantity of DIMMs

1

2

3

4

Channel B

DIMMB2 DIMMB1

V

V

V

V

V

V

V

V

DIMMA2

V

V

Channel A

DIMMA1

V

V

V

V

V

V

V

“V” indicates a populated DIMM slot.

Important
Only support UDIMM.
There should be at least 1 DDR5 DIMM populated.
Paired memory installation for Max performance.
If only 1 DIMM is populated in a channel, then populate it in the DIMMA2 slot.
Populate the same DIMM type in each channel, specifically: 1. Use the same DIMM size; 2. Use the same number of ranks per DIMM.
We don’t suggest other memory installation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>