WINGMAN X360 XB Converter User Guide

WINGMAN X360 XB Converter

Overview

Each Wingman XE can only connect to a single Xbox 360 / Xbox One device. Wingman XE supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly.

Instructions

LED Display

Blue LED

Permanently on

| ****

The connector and the device are currently connected.

Blue LED

Slow blinking (Once every two seconds)

| Wired device is not connected

Wireless device is searching for connection…

Blue LED

Fast blinking

| Wireless connection mode is ON. Searching for pairing device…
Red LED

Blinking

| ****

Turbo-Remap button is being pressed

Red LED

Permanently on

| ****

Entering Turbo-Remap Settings

Connecting to the Device

step.1
Insert Wingman XE into the PS4 console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful.

step. 2
Wired Connection:
Connect the X360/X1 wired controller or game pad to Wingman XE through the USB port.

Using a X360 wireless controller:
Simply connect the X360 wireless receiver to the Wingman XE through the USB port.

Wireless Connection:
Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman XE and the controller will be ready for use. When connecting, hold the LED buttons at the two sides of the Wingman XE for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Blue LED indicates that pairing is in progress.

step. 3
Check whether the two Blue LEDs at the sides of the Wingman XE are permanently on. This indicates that the connection is completed.

Connection Pairing Supplementary Instructions

step.1
Holding the LED buttons on the two sides of the Wingman XE for 1 second will activate wireless connection pairing mode. The Wingman XE will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:

• A. The connection pairing with the wireless controller is successful.
• B. The connection pairing is unsuccessful after 1 minute.
• C. The LED buttons are held for 1 second.

step. 2
Wireless connection records between an Xbox One wireless control-ler (with Bluetooth function)/Xbox One Series 2 and the Wingman XE will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.
step. 3
If Xbox One Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman XE’s Turbo or Remap settings. As Xbox One Elite Series 1 controller is incapable of turning off profile settings, using Xbox One Elite Series 1 controller might result in Remap function overlapping.

Corresponding Buttons
List for PS4, Xbox360 and XboxOne Game Pads

PS4

Game Pad

| Xbox360 Game pad| XboxOne Game pad
---|---|---
D-Pad (U/D/L/R)
Lx / Ly
Rx / Ry
╳| A| A
○| B| B
□| X| X
△| Y| Y
L1| LB| LB
R1| RB| RB
L2| LT| LT
R2| RT| RT
L3| LSB| LSB
R3| RSB| RSB
OPTIONS| START| MENU
SHARE| BACK+ START| VIEW+ MENU
PS Key| Xbox Guide Key| Xbox Guide Key
TouchPad Key| BACK| VIEW

Touch Pad Simulation Function

Using the Xbox 360 controller:
BACK + R Stick can simulate the PS4’s Touchpad button. BACK + START can simulate the PS4’s SHARE button.

Using the Xbox One controller:
VIEW + R Stick can simulate the PS4’s Touchpad button. VIEW + MENU can simulate the PS4’s SHARE button.

Turbo Function Settings

The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and XboxOne Game Pads.

Turbo Function Settings

Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

• Step 1. Enter setting mode:
  Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on.
  

• Step 2. Choosing a FK button: (e.g. Setting A as turbo function) Hold VIEW, then press A

• Step 3. Completing Setting Mode:
  Release all buttons, then press MENU to save settings.

• Step 4. Exit setting mode:
  Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.

Cancelling Turbo Function

• Step 1. Enter setting mode:
  Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on.

• Step 2. Erasing all Turbo function buttons
  Press VIEW + MENU

• Step 3. Exit setting mode:
  Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.

Button Remap Settings

The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and Xbox One Game Pads.

Button Remap Settings
Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

• Step 1. Enter setting mode:
  Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on.

• Step 2. Choosing a FK button: (e.g. Setting X as A+B) Press X

• Step 3. Choosing button to be set:
  Hold VIEW, then press A + B.

• Step 4. Completing setting mode:
  Release all buttons, then press MENU to save settings.

• Step 5. Exit setting mode:
  Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.

Cancelling Button Remap Settings

• Step 1. Enter setting mode:
  Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on.

• Step 2. Erasing all settings for Button Remap Settings.
  Press VIEW + MENU.

• Step 3. Exit setting mode:
  Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• ncrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Ambient Operating Temperature ………………….0℃ to +50℃

For more details please visit our official website at www.brookaccessory.com

References

• Brook Gaming

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>