AOC 24G2SPU LCD Monitor User Manual

AOC 24G2SPU LCD Monitor

Safety

National Conventions
The following subsections describe the notational conventions used in this document. Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

• NOTE : A NOTE indicates important information that helps you make better use of your computer system.
• CAUTION : A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
• WARNING : A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by a regulatory authority

Power

• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
• Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• To ensure satisfactory operation, use the monitor only with UL-listed computers which have appropriate configured receptacles marked between 100-240V AC, Min. 5A.
• The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

• Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
• Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
• Do not place the front of the product on the floor.
• If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
• Leave some space around the monitor as shown below. Otherwise, air circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
• To avoid potential damage, for example, the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under the warranty.

Cleaning

• Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.
• When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
• Please disconnect the power cord before cleaning the product.

Other

• If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
• Make sure that the ventilating openings are not blocked by a table or curtain.
• Do not engage the LCD monitor in severe vibration or high-impact conditions during operation.
• Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Setup Stand & Base

Please setup or remove the base following the steps as below. ****

Remove:

Adjusting Viewing Angle

For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. WARNING:

1.  To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
2.  Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

1.  HDMI-2
2.  HDMI-1
3.  DP
4.  D-SUB
5.  Audio in
6.  Earphone
7.  Power
8.  USB-PC upstream
9.  USB 3.2 Gen 1
10. . USB3.2Gen1+Quick Charging
11.  USB 3.2 Gen 1
12.  USB 3.2 Gen 1

Connect to PC

1. Connect the power cord to the back of the display firmly.
2.  Turn off your computer and unplug its power cable.
3.  Connect the display signal cable to the video connector on the back of your computer.
4.  Plug the power cord of your computer and your display into a nearby outlet.
5.  Turn on your computer and display.
   If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting. To protect equipment, always turn off the PC and LCD monitor before connecting.

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps:

1.  Remove the base.
2.  Follow the manufacturer’s instructions to assemble the wall mounting arm.
3.  Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor.
4.  Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall.

Adaptive-Sync function(Available for selective models)

• 1.  Adaptive-Sync function is working with DP/HDMI

  2.  Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
•  Radeon™ RX Vega series
•  Radeon™ RX 500 series
•  Radeon™ RX 400 series
•  Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
•  Radeon™ Pro Duo (2016)
•  Radeon™ R9 Nano series
•  Radeon™ R9 Fury series
•  Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

AMD FreeSync Premium function(Available for selective models)

1.  AMD FreeSync Premium function is working with DP/HDMI
2.  Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
   • Radeon™ RX Vega series
   •  Radeon™ RX 500 series
   •  Radeon™ RX 400 series
   •  Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
   •  Radeon™ Pro Duo (2016)
   •  Radeon™ R9 Nano series
   •  Radeon™ R9 Fury series
   •  Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

G-SYNC function(Available for selective models)

1.  G-SYNC function is working with DP/HDMI
2.  Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
   •  Radeon™ RX Vega series
   •  Radeon™ RX 500 series
   •  Radeon™ RX 400 series
   •  Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
   •  Radeon™ Pro Duo (2016)
   •  Radeon™ R9 Nano series
   •  Radeon™ R9 Fury series
   •  Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)

Adjusting

Hotkeys

• Power
  Press the Power button to turn on the monitor.

• Menu/Enter
  When there is no OSD, press to display the OSD or confirm the selection. Press about 2 seconds to turn off the monitor.

• Game Mode/ <
  When there is no OSD, press the”<” key to open game mode function, then press the”<” or “>” key to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.

• Dial Point/ >
  When there is no OSD, press the Dial Point button to show/hide Dial Point.

• Source/Auto/Exit
  When the OSD is closed, press Source/Auto/Exit button will be Source hot key function. When the OSD is closed, press Source/Auto/Exit button continuously about 2 second to do auto configure (Only for the models with D-Sub).

OSD Setting

1.  Press the MENU button to activate the OSD window.
2.  Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the MENU button to activate it, press Left or Right to navigate through the sub-menu functions. Once the desired function is highlighted, press MENU button to activate it.
3.  Press Left or to change the settings of the selected function. Press to exit. If you want to adjust any other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD – press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.

Luminance

Image Setup

Color Setup

Picture Boost

OSD Setup Game Setting

Extra

Exit

Troubleshoot

Specification

General Specification

Preset Display Modes

Pin Assignments

Plug and Play

Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>