BLING LIGHTING DMD-045-W3 Smart LED RGBCW String Light User Manual

BLING LIGHTING DMD-045-W3 Smart LED RGBCW String Light

Smart LED RGBCW String light User manual

Thank you for choosing us. To optimize users experience, please use the string light according to the following instruction.

Warning

1. Please check if the string light is intact before installation
2. Make sure to aut off power before installstion
3. Please do not place this Ight in corrosive conditions
4. if there is any damage on the cord. please cut off the power and stop using it immediately
5. Please do not retrofit the light within the warranty period.
6. To ensure the light works propety, please use the voltage indicated on the packing.
   lease do not use chemical sobvent during routine maintenance

Size

Initial Setup

1. Step : Connect string lights as indicated in the picture
2. Step: Firmly screw the wire nut.
3. Step: Power on.

Before installing. plug the smart string lights into an outlet to check if
all lights work properly
Before hanging up, please test to corfirm the smart string lghts can be connect to the APP

Note: Pease unphug the smart string lights before mounting.

Touch button operation instructions

1. Switch buton: short press the switch and long press the network for more than 5S

2. Mode button: Press to switch mode, including red, green, blue, yellow, purple, white, warm seven colors, flashing seven colors gradual change seven colors, breathing three colors, flowing water
   In static color mode, changan adjusts brightness. For dynamic magic mode, hold down to adjust speed

3. Lock and unlock:
   Lock: If there is no operation after 1805, touch button automatically lock, touch failure
   Unlock: Hold down the mode button for 5S, and the red light will
   blink once. Then hold down the switch button for 55, and the red light will blink twice, and uniock. Any interruption of long pressing or disordering of touches will require a re-operation to unlock.
   The device is unlocked each time it is powered on or configured successfully

Smart String Light
Please read this manual carefully before using Before going to next steps, please download the APP by scanning above code or simply search keywords Smart Life in the APP Store or Google Play

Add devices in Smart Life APP

1. Tuen the switch DN/OFF/ON/0FF/ON, or press the onoff button for more than 8s befare the lights work for 3 minutes The device willing to get ready for network connection
2. Make sure yout mobile device is connected to your home WiFi(2.4 Ghz only)
3. Enable Location setting on the mobile device
4. Go to Smart Life” APP and login with your account, clicke on the upper right corner
5.  A windaw will pop up and dick “Go to add”, if no pop-up window pleae click Auto Stan on the top middle screen
6. Select the device in the list you want to connect and dick (select to connect one by one, not support on multi-device selected)
7. Input the “Pauwword of your home wifi and cick “Confiem on pop up window
8. Wait tlithe pairing process complete and cick “Done on the right top cormer it will go to the manage page of this device (If there are multi devices which are reacy for netvork connection, it wll go back to the devien list when you dick “Dane

Tips

1. The name you gave to the device wil be used again when pair to Amazon Alexa & Googlo home for voice control ploasa do keepit in mind
2. The device name is suggested to be consist of Englnh word and Arabic umeras, please do not use special characters

Control the device in the Smart APP

1. Length setting
   Click the setting button on the upper right corner and cick the Light setting button, Choose the number of budbs what you have purchased. Here we choose 15

2. Color adjustment
   Choose the color that you like, then dick the “Preview button to see the effect yau have set If you ciek the “5ave Scene, the scene you have chose will be saved on the Custormize page as shown in the picture.

How to control the light with Amazon Alexa?
Please make sure that your AJexa app is corinected to Echo, and both wore well under your WFi network

1. Step A: Log in to your Alexa App. tap top left corne, and tep “Sklb
2. Step B: Type “Smart Life”, find Smart Life” from the search resut and tap it to enaale the skill
3. Step C Enter your Smart Life App account and password, Tap link Now, then tap Authorize on the next page to bind Smart Lte account to Alexs
4. Step D When your Smart Life account is bound to Alesa tap “DISCOVER DEVICES to detect the light.
5. Step E: When the named light is paired to Alexa from Smart Life, it wl show on the device page (see the samart bght example)
6. Step F: Now you can coritrol the light with Alexa App on the setting
7. page. To turn on or off the light, simply tap the bulb icon.
8. Step G: You can also voice control the light with Alexa by giving these com-mands” Alexa, tum on” devico nameAlexa set device name’ to’ color Alexa. ser device name’ to number. Device name is
   the one you give to the Fght, The light is named’ smart aght in this user guide. For example, Alexa, tum on’ smart light Alexa, set smart light to blue ete

Note: To control the It with Google Assistant please continue to read Part Four

How to control the light with Google Assistant?

1. Step At Login Google Assistant App, tag “Home Contro” on the left side bar page

2. Step B: Tap + button om the bottom right to enter next page.

3. Step C: Find Smart Life” from the sidebar list.

4. Step D. Enter your Smart Life App account and paisword to bind Smart Life account to Google Assistant

5. Step E: You wil find the named light shows on the Home Control pag Now you can control the ight on Gocgle Assistant App, or voke control t by giving these commands Ok Google, tum on device name”Ok Google, set device name’ to ‘colorok Google, et ‘device name to mumble The device name is the one you give to the igint The Bght is named smart lighr in this user guide For exampke ak Gaogle, tium. on smat lgit Ok Google, set art light to blue etc

When hanging the light string, it is recommended to use S-hooks, zip ties, cable ties or etc. to hang the hole on the top of each bulb. When you hang the string lights. please do not pull the wires too tight. Keep the wires loose to avoid breaking the signal line inside.

Troubleshooting

Fail to connect the smart life App

• Ensure the string ights are powered on. Confirm Bluetooth and 24ghz WIFl network on your smart phone is enabled
• Ensure the string lights are fashing to get reacy for network connection.
• Ensure your wifi password is comect.
• If wIFI signal is too weak, reset your wif router and try again. Or position your smartphone dose to the control box, then try again
• Failed to control the string light with remote controller Power on again
• Please press the button for more times.
• Please press the Lock /Unlock buttors to check whether the button is locked.
• Press the “1H’ and “W”buttons before the string light works for 3 minutes, the lights wll flash with blue, then the remote controller can work again.

FCC Statement

This equipment has been tested and fourd to comply with the jimits for a Class digit device. pursuant to part15 of the FCE Rules. These limits are designed to provide reasonable protection against harmful interference ina residenael installation. This equipment generates uses and can radiate radio frequency enerTy and, if net installed and used in accordance with the instructions, my cause harmful interference to radio communications. However, there is no guarantee that interterence wll nat our ina particular installation. If this equpmet does cause harmful inberference to radio or tejewision reception which can be determined by turning the equipmet off and on the user is encouraged to try to comect the interference by one or more of the following ures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment inte an audit on a circuit different frem that to which the receiver is connected.
• Coast the dealer or an experienced radio/TV technician for help

Caution Ary changes or modifications to this deios not explicitly approved by the manufacturer could void your auto rity to operme tis equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions (2) This device may not cause hamal interference, and 2) this device must accept any interference received, incuding interference that
may cause undesired operation.

RE Exposure Information
This equipment comples with FCC rad alien exposure Imits set forth for an uncontrolled environment. This equipment should be instaled and operated with
minimum dlstance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>