BeSafe Car Seat Lower Tether Straps Installation Guide
- June 12, 2024
- BeSafe
Table of Contents
Anchor Straps
For BeSafe Stretch
Accessory set when anchor points for lower tether straps are not available in the vehicle.
Installation
Contents: Anchor Straps – 2 parts. For information on how to install the
belt installed BeSafe Stretch, please refer to the relevant user manual.
Option
-
For back seat installation. Guide the anchor strap beneath the rail of the front seat. Then bring the metal end through the loop opening that results in the shortest anchor strap and pull tight. Repeat on the other rail. Make sure that the rails are well fixed to the vehicle. If your vehicle does not enable this method of attaching the anchor straps for back seat installation, please contact your retailer or BeSafe directly for advice on alternative methods.
Option -
For front seat installation. Combine the two anchor straps into one long one by bringing the metal end of strap 1 through the loop at the end of strap 2 and then through the loop at the end of strap
1. Pull the straps tight together. Put the center of the combined strap onto the front seat and guide both ends on each side around the backrest to the back.
From the back, guide both ends underneath the front seat to the front. Warranty: for details please visit www.besafe.com
References
- BeSafe: Developing the safest possible car seats for children of all ages | BeSafe
- BeSafe: Developing the safest possible car seats for children of all ages | BeSafe
- BESAFE
- Dobrodošli na najsigurniju stranicu u Hrvatskoj - Besafe Hrvatska