Yun Yun Ai YYCBV3 Cubo AI Baby Monitor User Manual
- June 5, 2024
- Yun Yun Ai
Table of Contents
Quick Start Guide
Cubo at a Glance
Status Light Color Reference
Sleep Mode
To enter sleep mode, hold the button for 3 seconds until you hear the beep.
Press the button once to resume activity.
Night Light: Press the button once to turn on and off the night
light
In the box
Choose your Set-up
Please follow the instructions according to your desired stand type
A Floor Stand
- Cubo Ai Baby Monitor
- Floor Base
- Water Bag
- T&H Dongle
- Wall Plug
- U-shaped Element
- L-shaped Element
- L-Hook
- Stand Element x 3
- Stand Connector x 2
- 3 M Cable
- Crib Stabilizer
B Crib Attachment
- Cubo Ai Baby Monitor
- Crib Attachment
- T&H Dongle
- Wall Plug
- U-shaped Element
- L-shaped Element
- L-Hook
- Stand Element x 3
- Stand Connector x 2
- 3 M Cable
- Crib Stabilizer
- Crib stand safety cap
C Mobile Stand
- Cubo Ai Baby Monitor
- Mobile Stand
- T&H Dangle
- Wall Plug
- 2 M Cable
A Floor Stand
B Curb Attachment
C Mobile Stand
https://qrco.de/bbTs5L
Scan to watch video Turial
Removing Cubo from the Camera Holder
| 1. Release the Safety Lock | 2. Lift Cubo upward from the Camera Holder |
|---|
Removing the Stand from the Floor Base
1. Open the round Floor Base| 2. Press button to release, pull the Stand
Element upward
---|---
WiFi Connectivity
Make sure your WiFi speed is at least 5Mbps
- Test your connection speed by standing next to your Cubo and heading to https://fast.com/while connected to your WiFi.
- If your WiFi speed is less than 5Mbps you may need to contact your Internet provider to improve your internet connectivity.
For more details please scan:
Arrange a safe crib environment
|
Clear the crib!
√ Don’t add bumper pads to the bed rail, sleep in the same room as the baby.
but not in the same bed
√ Avoid using pillows, toys, and blankets, wear a onesie to reduce the chance
of accidental face coverage
√ The mattress should be hard enough so that baby’s face won’t sink in
---|---
Sleeping on the back is safest!
Tummy sleeping could lead to indirect suffocation and cause hazards such as
reduction in blood oxygen, increase in body temperature, and impact the
autonomic nervous system.
Compliance and Precautions
- Cubo Ai Baby Camera is not a medical device and should not be used as a SIDS (Sudden Infant Death Syndrome) prevention tool. This is only a tool for caregivers to monitor their babies; the caregivers must check the baby’s condition regularly. for premature or potentially ill infants, this product should be used under the direction of a doctor or a medical professional. For more details, please refer to the product website or the terms of use and privacy policy on the App.
- Please install Cubo according to the instructions in the instruction manual. If the Cubo camera and bracket are installed properly, it may prevent unnecessary accidents. Please follow the instructions in the manual. Product name: Cubo Ai Smart Baby Monitor; Model: Angel Input 100-240V. Output: 5V2A, 2.4/5GHz Wi-Fi Yun Yun Al Baby camera Co., Ltd. 8F.-7, No. 2, Ln. 150, Sec. 5, Xinyi Rd., Xinyi Dist., Taipei City 110, Taiwan Yun Yun US Corporation 1108 S Baldwin Ave #107, Arcadia, CA 91007 Product liability insurance: This product has been insured by product liability insurance for $1,000,000 USD.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Need help?
Cubo Ai Smart Baby Monitor| App Setting > Chat with Us| support@getcubo.com
Share Cubo with even more parents!
| |
---|---|---
Recommend to Friends
Earn rewards for each successful referral!| Join Cubo
Community
Search for us on Facebook| Love your Cubo?
Share your story!
Email us your photos for the chance to win a small gift
marketing@getcubo.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>