AirVibes Pro Earbuds V40059W User Manuals
- June 6, 2024
- AirVibes
Table of Contents
AirVibes Pro Earbuds V40059W
User Manuals
In The Box
Take a Look
Charging
Powering On / Bluetooth Pairing
(When the earphones are not in the charging box)
Press & hold both power buttons simultaneously for 2-3 Seconds
(When the earphones are in the charging box just take them out and they will
power on automatically.)
Once your earphones are powered on, the LED indicator lights will alternately flash red and blue. After approximately 2-5 seconds, one earphone LED indicator light will flash blue while the other earphone indicator lights will alternately flash red and blue. This means both earphones are paired together.
(If both earphones do not paired together after 10 seconds put them back into the charging case then take them out to let them pair with each other again )
Check your phone’s Bluetooth settings menu.
Make sure that Bluetooth is turned ON.
Connect with the device listed as AirVibes Pro.
The LED Indicator lights of 2 earbuds will flash blue slowly.
Controlling Your Earphones
One Click : Play/Pause/Answer Incoming Call/End Call
Two Rapid Clicks : Activate Siri/Google Voice Assistants
Hold 2-3 Seconds : Reject an Incoming Call
Hold 3-4 Seconds : Power Off (When Not Receiving a Call)
Wearing Your Earphones
Choose the Ear tip that is most comfortable for you
FCC Statement
FCC ID: 2ALCF-XO-9946
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
Including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, If not installed and used In accordance with the instructions, may cause harmful interference to radio communications.
However, there Is no guarantee that interference will not occur In a particular Installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.