JLAB JBuds Air Executive True Wireless Earbuds User Guide
- June 5, 2024
- JLab
Table of Contents
Air Executive True Wireless Earbuds
User Guide
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or
visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates
How-to tips FAQs & more
Name: JBuds Air Executive True Wireless Earbuds
Model Name: JBuds Air Executive
PEAG, LLC dba JLab Audio
FIRST TIME SETUP
AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers. B. Press and
hold both touch sensors 3+ seconds to turn ON. Left earbud turns solthe id
white and Right earbud links blue/white indicating ready to pair to your
device.
CONNECTING TO BLUETOOTH
Select “JLab JBuds Air Executive” in your device settings. Voice prompt
“Bluetooth connected” followed by solid white lights will indicate you are
connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth
from the new device. Take earbuds out of the case. Earbuds will automatically
enter Bluetooth Pairing. Select “JLab JBuds Air Executive” in device settings
to connect.
IN THE BOX
BUTTON FUNCTIONS
VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double-tap
TRACKBACK: Press & hold 1+ sec
EQ CHANGE:
Triple tap
(JBuds Air Exec will cycle 3 EQ settings)
POWER ON: Press & hold 3+ sec| VOLUME UP: Single tap
PLAY / PAUSE: Double tap
TRACK FORWARD: Press & hold 1+ sec
ANSWER: Single tap
HANGUP: Double tap
REJECT INCOMING CALLS:
Press & hold 1+ sec
BE AWARE ON / OFF: Triple tap
POWER ON: Press & hold 3+ sec
VOICE PROMPTS
“Hello”: Power ON
“Earbuds joined”: Earbuds paired with each other
“Ready to Pair”: JBuds Air Exec is ready to pair to a Bluetooth device
“Bluetooth Connected”: The earbud is connected to the device
“Battery Full”: 100-80%
“Battery Medium”: 80-20%
“Low Battery”: Less than 20% When power decreases to 10%, “Low Battery”
will play
“Goodbye”: Power OFF
TURN OFF EARBUDS WITHOUT CHARGING CASE:
Enter your Bluetooth device settings and disconnect the JBuds Air Executive.
Earbuds will power OFF after 3 minutes.
EQUALIZER MODES
Triple tap left earbud for different EQ settings. Voice prompts will indicate
EQ settings (JBuds Air Exec will cycle 3 EQ settings)
| |
---|---|---
JLab SIGNATURE
JLab C3™ signature sound with amplified bass and vocals| BALANCED
Even sound with no additional enhancements| BASS BOOST
Amplified bass and sub-bass
CHARGING EARBUDS
-
lacing the earbuds in the charging case will power OFF the earbuds and start charging. Blue lights indicate earbuds are charging and will turn off when fully charged.
-
When earbuds are taken out of the case, they will auto-power ON and reconnect to your device.
CHARGING CASE
Connect the JBuds Air Executive to a computer or USB 5V 1A (or less) output device.
Lights pulse white when charging and turn solid white when fully charged.
FITTING
Try the optional Cush Fins and all ear tips for the best fit and proper seal.
Place the earbud in the ear canal and slightly rotate to adjust for the best fit.
TROUBLESHOOTING
NO AUDIO IN THE LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER (MANUAL RESET)
-
Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig A
-
Open the charging case door and leave both earbuds inside. Starting with ONE earbud, quickly tap the touch sensor 4x times. Light will blink blue 4x times then turn solid blue. Leave the earbuds in the charging case. Fig C1
-
Repeat with other earbud. Quickly tap the touch sensor 4x times. Light will blink blue 4x times then turn solid blue. Fig C2
-
Take both earbuds out of the charging case and keep them within 2 inches from each other. Wait for Left earbud to turn solthe id white and Right to blink blue/white. You are now ready to pair to your Bluetooth device.
BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT
-
Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig A
-
Turn OFF then ON Bluetooth. Fig B
-
Take the earbuds out of the case. Wait for Left to turn solid white and Right blinking blue/white.
-
Select “JLab JBuds Air Executive” in device settings to reconnect.
Instructional videos at: JLABAUDIO.COM/MANUALS
QUICK TIPS
- Fully dry off the earbuds before putting in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.
- The Bluetooth connection is established from the right earbud. For the most stable connection, keep thethe device near right-hanthe d side or in right pocket.
- If you prefer to wear only one earbud, you must wear the right earbud.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on the Bluetooth on chosen device to connect.
WARNING
Fully dry off the earbuds before placing in the charging case.
If the earbuds are damp or wet, this will cause damage to the charging case. The warranty will be voided if the charging case shows damage by water/sweat.
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and a keep them in safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed nd used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur n a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
References
- JLab: True Wireless Headphones, Earbuds, Microphones, Personal Audio
- Contact Us – JLab
- JLab Product Manuals
- Register Your Product – JLab