iBaby Care M2C Pro Baby Monitor User Guide
- June 5, 2024
- iBaby Care
Table of Contents
iBaby Care M2C Pro Baby Monitor
Includes
- 1 M2C Baby Monitor
- 1 Power Adapter
- 1 Wall Mount Kit
- 1 Quick Start Guide
Getting Started
Place Your Monitor Anywhere!
How to Mount Your Monitor
Option 1-3M Adhesive
- Peel the 3M adhesive and place it on the wall.
- Peel the remaining strip from the adhesive and place the wall mount on top.
- Insert your monitor into the wall mount.
Option 2- Drilling
- Drill two holes and insert (2) anchors.
- Drive (2) screws into the anchors.
- Slide the wall mount on top of the screws.
- Insert your monitor into the wall mount.
How to Install Your Monitor
- Verify that your smart device is connected to your 2.4 GHz Wi-Fi band.
- From the App Store or Google Play store, download the iBaby Care” App onto your supported device then launch the App.
- Connect the power adapter to the tail of your monitor and wait until the LED light flashes red.
- Follow the 2-step in-app instructions and your monitor will be ready to use within 30-60 seconds.
Changing your router or installation failed?
Reset your monitor by holding the back reset button for 5 seconds.
Then reinstall your device until you hear the voice.
WARNING-Strangulation Hazard-Children have been STRANGLED in cords. Keep this cord more than 3 feet away from the crib. Do not use it with an extension cord.
Changes or modifications not expressly approved by iBaby Labs could void the user’s authority to operate this device
Manufacturer’s Name: iBaby Labs, Inc
Sample Description:iBaby Monitor M2C
Trade Mark: iBaby
Model number: M2C
Operating Temperature: ‐10° C to 40° C
Max output power: 17.47dBm
This product is a fixed location. To comply with RF exposure requirements, a
minimum separation distance of 20cm must be maintained between the user’s body
and the device, including the antenna. Use only the supplied or an approved
antenna.
This device in compliance with the essential requirements and other relevant
provisions of
Directive 2014/53/EU. All essential radio test suites have been carried out.
- CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The device complies with RF specifications when the device used at 20cm from your body
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>