solos TPM-S002 AirGo Sunglasses User Guide
- June 5, 2024
- solos
Table of Contents
solos TPM-S002 AirGo Sunglasses
Power On/Off
-
Before power on, please confirm that the left and right temples are attached to the AirGo glasses frame.
-
To power on AirGo, long press multi-function button for 2 seconds until Power Status voice prompt is heard, and it’s LED flashes in blue color . AirGo will reconnect to last paired phone automatically.
-
To power on AirGo, long press multi-function button for 3 seconds until “Power Off” voice prompt is heard, and its LED will turn on
-
AirGo will power on automatically if it is not put on for 3 minutes..
-
POWER HIGH/OK/LOW”
-
POWER OFF”
Bluetooth Pairing
- Long press multi-function button for 5 seconds to power on AirGo until its LED flashes in red/blue color and “Pairing” voice prompt is heard.
- Turn on Bluetooth connectivity of your phone and put AirGo right next to your Phone
- Open Bluetooth settings on your phone and select “Solos AirGo xxxx”. (“xxxx” is the unique device number)
- AirGo’s LED will flash in blue color only after it is paired to your phone. It is ready for call and music now.
Operation Summary
- Volume Control
- Tap
- Multi-Function Button
- Temple Lock
Music Control
- To play music
- To pause music , single tap on the frame
- When playing music, short press on multi-function button to play next track
- When playing music, short press on multi-function button TWICE consecutively to play previous track
Phone Call
- To accept a phone call , short press multi-function button or slide backwards on right temple.
- To reject a phone call , long press multi-function button for 1 second or slide forwards on right temple.
- To end a phone call , short press multi-function button.
Phone Call Waiting
- To accept the 2nd incoming phone call, short press multi-function button. Current call will be ended.
- To reject the 2nd incoming phone call, long press multi-function button for 1 second.
FRONT FOLDING
Customer Care
If you experience any problem or with the operation of Solos products, please seek either support from our website (www.solosglasses.com) or email to our customer service at contact@solos.com.hk.
Warranty Registration
Please scan the QR code and complete the warranty registration. You will enjoy Solos’ service, latest product information and special promotion.
Volume Control
- To increase volume level , slide backward on right temple during phone call or listen to music.
- To decrease volume level , slide forward on right temple during phone call or listen to music.
- Each slide backward or slide forward will adjust one step of the volume level.
Voice Assistant
-
Double tap on the frame to enable voice assistant of your phone (iOS or Android).
After your double tap, you will hear the Voice assistant beep tone. You can start the
voice command. -
Double tap on the frame again to end voice assistant.
Charging
- Connect pogo pins connector of the charging cable to AirGo charging port.
- Plug USB connector of the charging cable to USB charger or laptop.
- AirGo’s LED shows in red color during charging and blue color after fully charged. AirGo will be automatically power on when it is under charging.
- When disconnect pogo pins connector from AirGo, AirGo will power on and reconnect to last paired phone automatically.
Mobile App
- AirGo mobile app uses AirGo smart glasses to provide AI Care , AI Coach and many other features.
- AI Care takes care of your health with providing wellbeing features such as posture monitoring, posture/stretching exercise, personal reminders (drink water), etc.
- AI Coach calculates and coaches your jogging activities.
- AirGo mobile app is available for both iOS and Android.
LED Lighting Mode
| OFF| Power o / AirGo is put on
---|---|---
2s| Blue color flashing in every 2 s
| Waiting for Bluetooth connection to a phone
1s| Blue color flashing in every 1 s
| Bluetooth connected to a phone
|
Red/Blue color flashing
| Pairing
FAST| Red/Blue color flashing fast
| Receive incoming phone call
| Red color
| Charging
| Blue color
| Fully Charged
FCC compliance statement United States : Federal Communications
Commission [ FCC ]
This device complies with part 15 of the FCC rules Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the Instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure Information and Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Warning: Any changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
device.
BACK FOLDING
Documents / Resources
|
solos TPM-S002 AirGo
Sunglasses
[pdf] User Guide
TPM-S002, TPMS002, 2AVSDTPM-S002, 2AVSDTPMS002, TPM-S002 AirGo Sunglasses,
TPM-S002, AirGo Sunglasses
---|---