Solos AirGo 3 Smart Glasses Instruction Manual

Solos AirGo 3 Smart Glasses

Power On/Off

• Before power on, please confirm that the left and right temples are attached to the AirGo 3 glasses frame front.

• To power on AirGo 3, press and hold Virtual Button on the right temple for 2 second until Power Status voice prompt is heard, and it’s LED flashes in blue color. AirGo 3 v reconnect  phone automatically

• To power off AirGo 3, press and hold Virtual Button on the right temple for 8 seconds until “Power Off” voice prompt is heard, and its LED will turn off.
  

Bluetooth Pairing

• Press and hold Virtual Button on the right temple for 5 seconds to power on AirGo 3 until its LED flashes in red/blue color and “Pairing” voice prompt is heard.
• Turn on Bluetooth connectivity of your phone and put AirGo 3 right next to you Phone.
• Open Bluetooth settings on your phone and select “Solos AirGo 3 xxxx” (“xxxx” is the unique device number)
• AirGo 3’s LED will flash in blue color only after it is paired to your phone. It is ready for call and music now

Clear Pairing List

• Press and hold Virtual Button on the right temple for 8 seconds to power on AirGo 3 until its LED flashes in red/blue color, “Pairing” voice prompt and final double-beep sound is heard to clear all host device pairing list inside AirGo 3.

Operation Summary

Music Control

• To play music , single tap on the frame
• To pause music  , single tap on the frame
• When playing music, press and hold Virtual Button on the right temple for 2 seconds to play next track .

 Phone Call

• Slide on the touch sensor towards the ears on right temple to accept a phone call .
• Slide on the touch sensor away from ears on right temple to decline a phone call.
• To end a phone call, press and hold Virtual Button on the right temple for 2 seconds.
• To accept the 2nd incoming phone call press and hold Virtual Button on the right temple for 2 seconds.

Customer Care

If you experience any problem or with the operation of Solos products, please seek either support from our website (www.solosglilsses.com} or email ta our customer service at cs@solosglasses.com

Volume Control

• To increase volume level slide on the Touch Sensor towards the ears on right temple.
• To decrease volume level   slide on the Touch Sensor away from ears on right temple.

Voice Assistant

• Double tap on the frame to call voice assistant of your phone (iOS or Android).

Charging

• Method 1: Connect pogo pin connectors of the dedicated charging cable to AirGo 3’s left temple charging dock.
  • Method 2: Connect Type C charging cable to AirGo 3’s left temple charging port.
• Plug USB connector ‘ of the charging cable to USB charger J4 or laptop.
• AirGo 3’s LED shows in red color  during charging and blue color after fully charged. AirGo 3 will automatically power off when it is under charging.

Mobile App

• AirGo mobile app uses AirGo smart glasses to provide Al Care, Al Coach and many other features.
• Al Care takes care of your health with providing wellbeing features such as posture monitoring, posture/stretching exercise, personal reminders (drink water), etc.
• Al Coach calculates and coaches your jogging activities.
• AirGo mobile app is available for both iOS and Android.

LED Lighting Mode LED

Warranty Registration

Please complete the warranty registration. You will enjoy Solos’ service, latest product information and special promotion. You can choose either ONE way to do your warranty registration: Method

• Download Solos AirGo App – Click SETTINGS” -* Click “WARRANTY REGISTRATION” Complete warranty registration. Method
• Scan this QR code – Complete warranty registration.

Warranty Registration QR Code

Safety Instruction

Hereby, Solos Technology Limited declares that this product is in compliance with Directive 2014/53/EU and other applicable EU directive requirement. The complete declaration of conformity can be found at: www.solosglasses.com/compliance
Please read the instruction care fully and keep this instruction.
Please heed all warnings and follow all instructions.
Use accessories specified by the manufacturer only.
Unplug this product during lighting storms or when unused for long periods of time.
Servicing is required when the product has been damaged, such as the product has been exposed to rain or moisture, does not operate normally, power-supply cord is damaged, liquid has been spilled.

Warnings/Cautions

• To prevent possible hearing damage, do not listen at high volume levels for long period.
• Use the product at a comfortable, moderate volume level.
• Turn the volume down before wearing the glasses or placing near your ears, then turn the volume up gradually until your each comfortable level.
• Use caution while driving and follow applicable laws regarding use of a mobile phone.
• Focus on your safety if you use the product while engaging in any activity requiring your attention, such as Walking in or near traffic, construction site or railroad.
• Do NOT use the product if it emits any unusual noise. Turn the product OFF and contact Solos customer service if this happens.
• Do NOT submerge or expose the product to water, or wear while participating in water sport. e.g., swimming ,surfing, etc.
• Remove the product immediately if you experience a warming sensation or loss of audio.
•  Keep the product away from fire and heat sources. Do NOT place flame sources on or near the product.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency-approved power supply that meets local regulatory requirements.
• Do NOT wear the product while charging.
• After each use, wipe all parts of the frame with the pouch bag provided or a dry cloth.
• After charging completed, unplug the charging cable from USB port.

This product contains magnetic material. It may interfere with medical devices.
Consult your physician before use.

Regulatory Information FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

The SAR limit adopted by FCC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using in portable exposure conditions is 0.28 W/kg. EU Regulatory Conformance

RF exposure information:
The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
Manufacturing for: Solos Technology Limited
Address: UNIT 211, 2/F PHOTONICS CENTRE, NO. 2 SCIENCE PARK EAST AVENUE, HONG KONG SCIENCE PARK, SHATIN, N.T., HONG KONG
Model number: TPM-5003
Operation temperature: 0~40°C
Operating frequency (Max Power): 2400 to 2483.5 MHz (9.9 dm)

This symbol means the product must not be disposed as household waste. It is your responsibility to dispose of your waste equipment separately from the municipal waste stream. The correct disposal of your end-of-life equipment will help prevent potential negative consequences for the environment and human health. Do NOT attempt to remove the rechargeable lithium-ion battery from this product. The product complies with the ANSI Z80.3 and EN ISO12312-1.
For sunglasses lens: Not suitable for driving in twilight or at night.
EU FILTER CATEGORY: ISO 12312-1 CAT 3 These sunglasses provide a high protection against sunglare and good UV protection.
UV rating: UV400 cut.
For optical lens: EU FILTER CATEGORY: ISO 12312-1 CAT O Very limited reduction of sunglare.
UV rating: UV400 cut. Not for direct observation of the sun. Not for protection against artificial light sources, e.g., solaria.
Not for use as eye protection against mechanical impact hazards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>