Autel Robotics EVO II RTK Series DRONE with Camera User Guide
- June 5, 2024
- AUTEL ROBOTICS
Table of Contents
Autel Robotics EVO II RTK Series DRONE with Camera
GETTING TO KNOW THE EVO II RTK SERIES
The EVO II RTK provides high-precision, centimeter-level positioning accuracy. It embodies all the elements of the original EVO II series, making It compact, portable and ready to deploy in minutes. Not only does it provide advanced functions such as obstacle avoidance and intelligent flight modes, but it also utilizes the latest high-tech technology, achieving a maximum speed of 45mph (72km/h), up to 36 minutes of flight time, and is capable of image transmission at distances of up to 5.Bmiles (9km, FCC). It comes with a 3-axis stabilized gimbal camera that enables viewing of real-time imagery at a resolution of up to 1080p on mobile devices, or 720p on the built-in OLED display of the remote control.
IMPORTANT:
- Please check all the documentation before your first flight.
- Improper operation of the drone may result in injury or loss, and loss of all applicable warranty services.
PRODUCT FEATURES
- Propellers
- Motors
- Front LED Indicator
- Landing Gear
- Forward Vision System
- Camera Gimbal
- RTK Module
- Power Button
- Rear Vision System
- Rear LED Indicator
- Left Vision System
- SD Card Port
- Right Vision System
- Aircraft Battery
- Fan Exhaust
- USB Port
- Remote Control Pairing Button/Pairing Indicator
- Top Vision System
- Ultrasonic Sensor
- Downward Vision Lighting LED
- Downward Vision System
FLIGHT LED INDICATIONS
The aircraft nose LED status indicator is used to indicate the aircraft nose
direction. After the aircraft is powered on, the red light will be displayed.
The aircraft status indicator on the tail indicates the current status of the
flight control system. Please refer to the table below to get a better
understanding of the status of the flight control system indicated by
different flashing modes,
Flight LED indicator status
INTRODUCTION TO THE REMOTE CONTROLLER
- Mobile device stand
- Flight Information Panel
- Joystick
- Handle
- Takeoff/Landing Button
- Power Button
- USB Ports
- Pause Button
- Home Button
- Antennas
- Screen navigation knob
- Screen Navigation Button
- Camera Button
- Button A
- ButtonB
- Video Button
- Gimbal pitch angle dial
Adjustable 180° viewing angle to provide the best viewing effect. Displays flight status, warning messages and real-time video. Controls the direction and movement of the aircraft Foldable to reduce storage space Determines take off or landing of the aircraft Press and hold the button for 3 seconds to turn on/off the remote controller Used for charging or connecting to mobile devices. Used to instruct the aircraft to halt when flying autonomously and hover Over the Current poSition – Or resume autonomous flight Command the aircraft to return to the home point The communication frequency with the aircraft is 2.4 GHz/5.8GHz Used for scrolling through the OLED display screen After disconnecting the mobile device, press this button for 1 second to enter/exit the image transfer screen on the remote controlleer Used for taking photos. After using the continuous shooting mode, click this button to take multiple pictures. For detailed instructions, Please refer to the App manual. Use Autel ExplorerTM App to set functions Use Autel ExplorerTM App to set functionss Start or stop video recording Control the pitch angle of the camera gimbal
AIRCRAFT & REMOTE CONTROLLER CHARGING
The charger contains two ports, which can charge the aircraft battery and
remote controller at the same time.
- Aircraft battery: Insert the charging cable into the charging slot.
- Remote controller: Open the USB port protection cover at the bottom of the remote control, plug the USB charging cable into the charging port.
NOTE
- Always use the aircraft and remote control batteries before flying.
- It takes about 90 minutes to fully charge the aircraft battery.
DOWNLOAD THE AUTEL EXPLORERTM APP
Although the aircraft can be controlled only with the remote controller, advanced flight and image capturing and video functions still require the use of the App. Refer to the following steps to connect to the application.
- Enter keywords “Autel Explorer” in the App Store/Google Play/Android/360 App Market/Official Website, to search and download the Autel explorer app.
- Launch the application on your mobile device.
- Follow the on-screen instructions to connect the mobile device and the remote controller.
PREPARING THE AIRCRAFT
- Please remove the gimbal protective cover before turning on the power switch of the aircraft, as shown in the figure below.
- Unfold the arm and propeller.
INSTALLING THE PROPELLER
By default, the propeller is already installed on the aircraft. If you need to reinstall it, please refer to the following instructions.
NOTE:
- The propeller must be intact and firmly installed on the aircraft, and the screw marked with a white circle.
- Install the propeller on the motor propeller seat with a white circle mark, and install the propeller without the white circle mark.
- Install the propeller on the motor propeller base without the white Circle mark.
Installing the propeller
- Confirm that the aircraft is turned off.
- Select the propeller that matches each motor.
- Press down the propeller firmly, and then turn it in the locking direction to make the propeller securely installed.
Removing the propeller
- Turn off the aircraft.
- Press down the propeller firmly, and then turn it in the unlocking direction to remove the propeller.
Description
- Lock direction: Rotate in the indicated direction to fix the propeller. Unlocking direction: Rotate the propeller as instructed to loosen it.
- Propeller without white ring mark>Pairing>Motor propeller seat without white ring mark.
- White circle marks the propeller>Pairing>White circle marks the motor propeller seat
PREPARING THE REMOTE CONTROLLER
- Unfold the mobile device bracket, antenna and handle in sequence.
- Place the antenna vertically to get the strongest signal.
POWERING UPP
- Long press the power switch for 3 seconds to turn on the remote control.
- Long press the power button for 3 seconds to turn on the aircraft. The battery indicator will light up to display battery the Current level of the aircraft.
TAKING OFF
- Before takeoff, please place the aircraft on a flat ground with the tail facing towards you.
- Simultaneously move the joystick in the inwards or outwards and hold for 2 seconds:
- After the motors have been started, you can choose any of the following methods to command the aircraft to take off:
COMMAND STICK CONTROLS(MODE 2)
Documents / Resources
|
Autel Robotics EVO II RTK Series DRONE with
Camera
[pdf] User Guide
EVO II RTK Series, DRONE with Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>