BALDR B0362S LED TWIST SETTING TIMER User Manual

BALDR B0362S LED TWIST SETTING TIMER User Manual

Thank you for your purchase of Baldr LED TWIST SETTING TIMER.It has been designed and constructed using innovative components and techniques to count up and down time in different occasions.Please read the instructions carefully to become familiar with properties and functions before usage.

Powered by 3xAA batteries(not included)

PRODUCT OVERVIEW

PACKAGE CONTENT

Following contents are included in the package:
1 x B0362S Digital Timer
1 x User Manual

GETTING STARTED

1.  Remove the battery compartment cover.
2.  Insert 3xAA batteries matching the polarity(+and -).

HOW TO USE

Countdown Time Setting

1. Twist the rotary knob to set the time you want,clockwiserotate to increase the digit and counterclockwise rotate to decrease the digit. Rotate the rotary knob quickly to increase or decrease the digit rapidly.(Rotation angle greater than 60 degree)
2. After countdown time is set,press button once to start counting, press again to stop counting, after stop counting, press [©] button for zero clearing.
3. When counting down to 00 minutes and 00 seconds,the digital timer will be buzzing and the screen will blink. The alarm will last for 60 seconds and can be stopped by pressing the button.

Count – up Time Setting(Using as a stopwatch)

1. Press [©] button to set time to zero in non-working status. When the display shows 00 minutes and 00 seconds, press button once to go for stopwatch function.
2. Stopwatch counting up from 00 min and 00 sec to 99 min and 55 seconds only.

Volume Adjustment

Switch the volume button on back to choose the proper volume.

1. There are 3 volume levels adjustable

Recall Function

1. After your last countdown time counts down to 00 min and 00 sec, simply press the button once to recall the last countdown time.
2. Press the button again to start another counting.

Auto Sleep Mode

1. The digital timer will auto sleep while no operation for 5 seconds and the brightness will automatically reduced .
2. The display will be automatically closed while no operation for 10 seconds.

SPECIFICATION

 |

|

R

|
---|---|---|---

T

|

（32 ℉~122 ℉）

|

F

|
 L| 6 months|  | Black or White Selectable
 |

87*33mm

|  | 155 g

POSITIONED METHOD

The timer can be positioned in 2 ways as desired.
A. Four powerful magnets on the back for placement on any iron surface,simply stick it to fridge door, microwave oven etc.
B. Simply placement upright on a table-top.

PRECAUTIONS

• Do not clean any pad of the product with benzene, thinner or other solvent chemicals. When necessary, clean with a soft cloth.
• Never immerse the product in water. This will damage the product. Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of different types.
• Do not mix alkaline, standard or rechargeable batteries with this product.
• Remove the batteries if storing this product for a long period of time.
• Do not dispose of this product as unsorted municipal waste.
• Collection of such waste separately for special treatment is necessary.

WARRANTY

BALDR provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to us, or our authorized service center.
The warranty covers all defects in material and workmanship with the following specified exceptions:(1) damage caused by accident, unreasonable use or neglect (including the lack or reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of any accessory or decorative surface;(4) damage resulting from failure to follow instructions contained in your owner’s manual. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. To receive warranty service, the purchaser must contact with BALDR nominated service center for the problem determination and service procedure. Thank you for your choice of BALDR product7

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>