BALDR ET214-S Pool Thermometer User Manual
- June 1, 2024
- BALDR
Table of Contents
BALDR ET214-S Pool Thermometer
Welcome to BALDR family, please read the manual and save it for future reference.
- Email: [email protected]
- US toll-free : +1 833-381-5659
- (Mon-Fri : 09:30 AM-5:30 PM PST)
- DE toll-free : +49 800-182-0576
- (Mon-Fri : 09:00 AM-5:00 PM CET)
- UK toll free : +44 800-808-5337
- (Mon-Fri : 09:00 AM-5:00 PM CET)
PACKING LIST
*Receiver 1**
*Pool Thermometer 1**
*USB Type-C Charging Cable1**
*User Manual1**
PRODUCT OVERVIEW
RECEIVER
- Indoor Temperature
- Indoor Humidity
- MAX/MIN Records of Indoor Temperature and Humidity in 24HRS
- Battery Indicator of Receiver
- Pool Temperature
- Pool Icon
- MAX/MIN Records of pool thermometer in 24HRS
- Signal Indicator
- Battery Indicator of pool thermometer
- Power Switch
- Hanging Hole
- Bracket
- Battery Compartment
- Press the button to check max/min temperature & humidity records.
- Hold the button to select Celsius C or Fahrenheit °F.
POOL THERMOMETER
PRODUCT INTRODUCTION
SPECIFICATION
- Temperature Range: -4°F-140°F (-20°C-60°C)
- Temperature Accuracy: + 1.8 °F (‡ 1°C)
- Rechargeable Battery: Lithium battery, 1200mAh
- Working Voltage : 3.7V
- Input : DC 5V 1A
- Waterproof Rating : IPX7
- RF433 Connection Range: 328ft/100m
- Cover Material :UV-Resistant ABS
OPERATION
- Put the thermometer into pool, it will float on the water and detect the temperature automatically.
- Press and hold the “ON/OFF” button for 5 seconds until the LCD on the thermometer shows “C” or “F”. Release the button and the digits begins to flash. While the temperature value is flashing, gently tap the “ON/OFF” button to switch between Celsius and Fahrenheit. After switching to the desired unit, wait 5 seconds for the setting to be automatically confirmed, and the digits on the screens will no longer flash and the unit will return to the temperature measurement state.
- When the thermometer is powered off, tap the “ON/OFF” button to power on it. The screen will display the temperature before the last power off. After 2 seconds, it will show the current temperature where the temperature sensor is located.
- When the LCD screens are displayed, triple-click the “ON/OFF” button within one second. The LCD screens will display “OFF” for two seconds, after which the thermometer will automatically turn off.
- Low Battery Reminder: When the pool thermometer needs charging, the digits on the LCD will flash to indicate low battery.
- During Charging: The digits on the screen will flash while charging, and once fully charged, the digits stop flashing.
- Power On the Receiver : Insert 2*AA alkaline batteries into the receiver and long press the power switch to power on the receiver. The receiver and the pool thermometer will pair automatically through the RF signal.
- (please note the battery polarities when inserting the batteries)
- Switch Temperature Unit °C/°F: Press the button to select Celsius °C or Fahrenheit °F.
- The RF signal and the LCD will automatically turn off in dark environments at night, saving more power.
ATTENTION
- Please dry the product after use and store it in a dry place.
- Do not place heavy objects on the pool thermometer.
- Walls, glass films, and trees can attenuate the signal. Electrical appliances such as microwave ovens and televisions can interfere with the signal. When installing, please keep the receivers as close as possible to the thermometer and keep them away from sources of interference.
- Please ensure the rubber seal of the USB port is completely secured before use.
- Please make sure the USB charging port is dry before charging to prevent a short circuit.
WARRANTY
Dear customer, Thank you for choosing BALDR. We provide a 3-year limited warranty on this product from the date of purchase. This product has undergone thorough quality inspection at the factory to ensure that the product is in good condition. During the warranty period, we will repair any manufacturing or material defects. For the warranty to be granted, all warranty claims must be accompanied by proof of purchase from an authorized distribution partner. Damage due to improper installation or use, unauthorized removal/modification/repairment are not covered by the warranty. If you have any problems with this product or during use, please do not hesitate to contact us, we will try our best to solve it and offer you satisfactory service including replacement or refund.
For full warranty details, contact us by:
- Email: [email protected]
- Direct Contact Amazon Store : Within 24 Hours
- US toll-free : +1 833-381-5659
- (Mon-Fri : 09:30 AM-5:30 PM PST)
- DE toll-free : +49 800-182-0576
- (Mon-Fri : 09:00 AM-5:00 PM CET)
- UK toll free : +44 800-808-5337
- (Mon-Fri : 09:00 AM-5:00 PM CET)
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
-
MANUFACTURER/HERSTELLER/FABRICANT/ PRODUTTORE/FABRICANTE : MINGLE SCITEK(SHEN ZHEN)LIMITED COMPANY
-
ADDRESS/ADRESSE/ADRESSE/INDIRIZZO/DIRECCION: 4th Floor, Building 3, NO.2 TongFuYu Industrial Zone, GanKeng Community, JiHua Town, Longgang District, Shenzhen.
-
Email : [email protected]
-
EC REP NAME : VIAJE ELECTRONIC COMPANY LIMITED
ADDRESS: E588, 13 ADELAIDE ROAD, DUBLIN, D02 P950, IRELAND -
Email :[email protected]
-
UK REP NAME : SUJE ELECTRONIC COMPANY LIMITED
-
ADDRESS : S211 92a Bury Old Road, Manchester, England, M45 6TQ
-
Email :[email protected]