EDUPLINK M2 Series Waterproof Wireless Speaker User Manual

: June 5, 2024
: EDUPLINK

EDUPLINK M2 Series Waterproof Wireless Speaker User Manual

FEATURES:

Wireless 5.0
TWS interconnection
Colorful Party Light
TF Card & AUX Audio
Mini Portable Design

INTRODUCTION

Thank you for purchasing the M2 Wireless Speaker. We advise you to read, follow and keep the following instructions in order to be able to correctly set up the speaker and enjoy all its features to the fullest.

PACKAGE CONTENT

1*M2 Wireless Speaker
1*Type-c charging cable
1*3.5mm AUX cable
1*User Manual

SPECIFICATIONS

Model Name: M2
Speaker: 52mm 4Ω
Battery: 1800mAh 3.7V
Output: 5W
Input: 5V 1A
Weight: 224g
Transmission Range: 10m/33ft

KEY FUNCTION DEFINITION

Power button
Long press on / off Short press to pause / play
Wireless / telephone
Short press (1) to switch mode (2) to answer / end the call.
Long press to disconnect the wireless connection.
“-” button
Short press to decrease the volume.
Long press the previous song button
“+” button
Short press to increase the volume
Long press to play the next track
TWS button
Press and hold start or cancel TWS interconnection.
Click to turn party lights on or off.
Double click to clear TWS pairing.
TF card slot
External Audio Connection
Type-c charging
Charging light / Bluetooth indicator/Low power indicator
TWS indicator

OPERATIONS

Pair the speaker with your smartphone

Long press the “ ” power button to turn it on or off.
After turning it on, and pair “M2″ under Wireless. If it’s connected successfully, you will hear the prompt tone that“ Device is paired”.

Pair the speaker with your computer

Turn on the M2 Wireless Speaker.
Turn on the Wireless on your computer, then pair “M2”.

Have connecting problem?

Make sure that your device is within 1 meter from the speaker.
Clear the Wireless pairing list on your device.
Make sure the speaker has entered the “Wireless Mode” rather than “AUX in Mode” or “TF card Mode”.
Try to reset your device.
Make sure your device is set up correctly.
Try the pairing steps above again.

Auto-off Timer

The auto-off timer conserves the battery when the speaker is operating on battery power.
In Wireless mode, the speaker switches off automatically when the Wireless device has disconnected and buttons have not been pressed for 20 minutes.
In AUX in mode and TF card mode, the speaker switches off when audio has stopped and buttons have not been pressed for 20 minutes.

AUX in Mode

Please connect one end of the 3.5mm audio cable to the headphone output port of the mobile phone / computer and the other end to the audio, the speaker will switch mode automatically with a prompt tone “AUX in mode”, then you can play music.
Note: In AUX-in mode， the Bluetooth speaker cannot answer the phone call.

Play music via TF card Mode

Card capacity: 32G or below.
Support files: mp3.

Playing Time

Full light on
Full volume 3-4 hours, 70% volume 5-6 hours, 50% volume 7-8hours, 30% volume 8-10 hours.
light off
Full volume 4-5 hours, 70% volume 6-7 hours, 50% volume 8-9hours, 30% volume 10 12 hours.
Note: playback time varies with volume and audio content.

Hands-free Calling

When the Wireless is connected successfully and you make calls with phone, slightly tap“ “to answer incoming call, and long press to reject the call. Without Obstacle, a single Wireless connection distance > 33ft (10m).

Party Light Control / TWS Connect

Tap slightly the “ ” button can turn on / off the colorful party lights. When device turned on, the default setting is to switch on the random RGB colorful party lights, the beat will change with the voice volume and beat of the music.
The party light do not changed by the beat?
Please turn up the volume on the speaker and your device.
TWS wireless stereo: Press and hold the “ ” button on one of the speakers until the two white lights on the “ ” button are on
You just need to pair one Wireless to speakers. If connected successfully, the two will automatically switch into left and right channels.
(Note: If one of them doesn’t work, please check if it has enter Wireless mode by tapping slightly “ ”， and then pair again ) TWS connection distance> 16ft (5M).
Note: This function requires our two speakers, and both are turned on in Wireless mode. No
Wireless connection to any device before. When the TWS is connected, long press one of the product’s “ ” button can cancel.

Charge the speaker

Audio voice prompt “Out of battery” ,and the red light of the charging prompt light flashes.
Please charge speaker as quickly as possible.
While charging the speaker, please do not use the AUX cable to connect computer at the same time.
Charging time: About 4.5 hours to fully charge the speaker.
Note: While charging, it is normal that the speaker gets hot. Please don’t worry.

TROUBLE SHOOTING

Problems	Solutions
No power	Battery may be in protection mode or drained. Plug in and charge the

speaker.
Battery cannot be charged|

Make sure you are using a USB cable from a qualified manufacturer.
Please use a adapter to charge the speaker, do not use computer USB port or other.
Try to use a different USB cable.

No sound|

Turn off the Wireless on your device. Remove the speaker from the Wireless list and then try to pair your device again.
Increase the volume on the speaker and your device.
Make sure that you are using the correct device.
Use a different music source.
Try to pair a different device.

No sound when in aux-in mode|

Make sure the device connected to your speaker is turned on and playing music.
Increase the volume on the speaker and your device.
Make sure the device is properly connected.
Try to use a different cable.
Try to connect a different device.

Poor sound quality/buzzing sound|

Try to use different music sources.
Increase the volume on speaker and device.
Check the device’s audio settings.
Charge the speaker until fully charged.

WARNINGS

Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the speaker.
Do NOT cleaning stuff that contains benzene, solvents or alcohol.
Do NOT expose the speaker to excessive heat or direct sunlight for prolonged periods of time.