EDUPLINK MEN MART II Louder Bluetooth Portable Speaker User Guide
- June 15, 2024
- EDUPLINK
Table of Contents
EDUPLINK MEN MART II Louder Bluetooth Portable Speaker
FEATURES
- Stereo Sound
- Wireless 5.0
- True Wireless Stereo
- Colorful Party Light
- TF Card & AUX Audio
- IP67 Waterproof
PREFACE
Dear customers, please read this manual carefully before using the product and keep it properly.
PACKAGE CONTENT
- 1*Men mart II Main device
- 1* Type-C cable
- 1* 3.5mm Aux in cable
- 1* User Manual
KEY FUNCTION DEFINITION
- Power: Long press Turn on/off Short press Play/Pause
- Bluetooth/Phone: Long press force to disconnect the Bluetooth connection
- Short press switch Bluetooth/Aux in mode Answer/Hang off a phone call
- Plus: Short press to increase volume Long press to next track
- Minus: Short press to decrease volume Long press to the previous track
- 3D: Long press to turn on/off night mode Short press to turn the 3D sound on/off
- TWS pairing: Short press on/cancel TWS connection
- Long press to clear away TWS pairing
Type-C interface
- AUX interface
- TF card slot
- Power bank output interface/USB flash disk interface
- Charging light/Power bank light/Low power indicator Bluetooth light
- 3D sound indicator
- TWS light
OPERATION INSTRUCTION
Bluetooth mode
- Turn on the speaker and enter Bluetooth mode, and the Bluetooth light starts to flash. Turn on the Bluetooth on your device search for “Men mart II” and connect to your speaker.
- If it’s connected successfully, you will hear a prompt tone that“device paired ”. The Bluetooth light is always on, now you can play music on your device by Bluetooth.
- When the Bluetooth is connected successfully and you make calls with your phone, the voice will automatically enter into the Bluetooth hands-free mode. Short press the “ ”key to answer incoming calls, and Long press to reject calls.
AUX in mode
Please connect one end of the 3.5mm audio cable to the headphone output port
of the mobile phone/computer, and the other end to the audio. The audio will
automatically switch and prompt “external sound source mode” to play music.
Due to the lower power supply capability, most computers’ USB interfaces can
not meet the speaker’s operational requirements. It is not recommended to use
the computer’s USB for charging synchronously when you play music in the AUX
mode while connecting the computer.
TF card play
Please insert the TF card into the speaker, the speaker will switch mode
automatically with a prompt tone “TF card mode”, and the speaker will play
music saved in the card automatically, The TF card memory maximum is 32G.
(This mode only applies to some models, please consult local dealers for
details.)
USB flash disk playback mode
TWS stereo sound plays successfully music on the speaker showing dual stereo
sound effects.
Note
This function requires two Men Mart speakers, make sure both are turned on and
in the Bluetooth mode. When TWS is connected, short press” When sts connected,
so are presser devices beyond one parker to cancel the interconnection. After
clearing TWS pairing, power on will not automatically connect back to TWS.
Cool party lights
Switch on and enter the light effect mode before shutdown, Long press the
On/off the light effect. Short press to switch to 3D sound. ” key to turn
Type-C Quick charge
- Do not use a power adapter that has not been certificated by safety certification.
- power adapter with output 5V..2A is recommended for charging.
- The audio voice prompt “Out of battery”, and the red light of the charging prompt light flashes.
- Please charge the speaker as quickly as possible.
- This speaker supports self-adaption charging. It’s able to choose to charge current automatically according to the external rated power of the adapter.
- When charging by USB interface on the computer, the current is smaller and it takes a longer time to complete charging.
- When the speaker is charging, the power light is red and always on. When the speaker is fully charged, the power light is green and always on.
- Kindly tips: Handle the protective cover carefully. The protective cover plays an important role in keeping waterproof and dustproof performance It is of great importance.
Energy saving
The speaker will automatically shut down to save power under the below
circumstances.
- In Bluetooth mode, after 20 minutes of waiting for no device pairing.
- In any mode, short press the” “key and pause for 20 minutes without any operation the speaker Will shut down automatically, Please long press the power key to turn it on again.
Power bank output
- The USB and Type C interfaces of the same charging line are forbidden to be inserted into the speaker simultaneously.
- USB-A OUTPUT: 5V=1A(Power bank function only works when the speaker is turned on)
- Turn on the speaker insert the standard USB cable into the output interface of the power bank, and connect the other end to the mobile. At this time the power bank indicator is green, the green indicator will be off after the mobile is fully charged.
- Turn off the speaker in the process of using the speaker to charge the mobile, the speaker will stand by, the power bank function will work normally, and the speaker can be awakened by long pressing the power key.
TECHNICAL PARAMETERS
- Bluetooth version: 5.0
- Battery capacity: 7200mAh
- Charging voltage: 5V-2A
- Product weight 900g
TROUBLESHOOTING
-
Can not connect to Bluetooth or no sound when playing music?
Please make sure the speaker is in Bluetooth mode, and also make sure your device supports Bluetooth function and Bluetooth has already been turned on when searching for devices. Check if there are too many Bluetooth devices around, which might bring difficulties in the search process. Please turn off other Bluetooth devices. -
What if the TF card/USB flash disk doesn’t respond?
Please make sure the TF card/USB flash disk is of good quality, and check whether the audio file is MP3 playing format. If all the problems above are excluded, it might be a TF card/USB flash disk compatibility issue, you can consider formatting the TF card/USB flash disk to FAT32 or changing a different TF card/USB flash disk.
HOW TO EMAIL QUICKLY?
Please scan the QR code and email it to us.
eduplink_warranty@126.com
Manufacture: Shen zhen ZhiQi Technology Co., Ltd.
Address: B902 Baochengtai Square, No.38 Qinfu Road, Liuyue
Community, Henggang Street,Longgang District,Shenzhen. China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>