EDUPLINK M8 Waterproof Wireless Speaker User Manual

EDUPLINK M8 Waterproof Wireless Speaker User Manual

FEATURES:

• Stereo Sound
• Wireless 5.0
• True Wireless Stereo
• Colourful Party Light
• TF Card & AUX Audio
• IP67 Waterproof

PREFACE

Dear customer: Thank you for purchasing the M8 Bluetooth Speaker, For your better user’s experience please read the user manual carefully before use. Enjoy the music journey! Please keep this user manual for your later references!

PACKAGE CONTENT

*1M8 Main device**

1. Strap hook

2. Power: Long press Turn on/off
   Short press Play/Pause

3. Bluetooth/Phone:
   Long press force to disconnect
   Bluetooth connection
   Short press switch Bluetooth/ Aux in mode
   Answer/Hang off phone call

4. Plus: Short press to increase volume
   Long press to next track

5. Minus:
   Short press to decrease volume
   Long press to previous track

6. Lights key:
   Short press turn on/off lights

7. TWS pairing:
   Short press on/cancel TWS connection
   Long press to clear away TWS pairing

8. Charging light/Power bank light/Low power indicator

9. Bluetooth light

10. TWS light

11. AUX interface

12. TF card slot

13. Type-C interface

14. Power bank output interface/ USB flash disk interface

1 Type-C cable
1 3.5mm Aux in cable
1* User Manual

OPERATION INSTRUCTION

1. Bluetooth mode

1. Turn on speaker enter into bluetooth mode, the bluetooth light starts to flash. Turn on the bluetooth on your device search for ” M8 ” and connect to your speaker, If it’s connected successfully, you will hear a prompt tone that “device paired “. The bluetooth light is always on, now you can play music on your device by bluetooth.
2. When the bluetooth is connected successfully and you make calls with phone, the voice will automatically enter into the bluetooth hands-free mode. Short press ” “key to answer incoming call, Long press to reject call.

2. AUX in mode

Please connect one end of the 3.5mm audio cable to the headphone output port of the mobile phone / computer, and the other end to the audio. The audio will automatically switch and prompt “external sound source mode” to play music. Due to the lower power supply capability, most computer’s USB interface can not meet speaker’s operational requirements. It is not recommended to use the computer’s USB for charging synchronously when you play music in the AUX in mode while connecting computer.

3. TF card play

Please insert TF card into speaker, the speaker will switch mode automatically with a prompt tone “TF card mode”, the speaker will play music saved in card automatically, TF card memory maximum is 32G. (This mode is only apply to some models, please consult local dealer for details.)

4. USB flash disk playback mode

Insert the USB flash disk with music files into the audio USB interface, The audio automatically switches to USB flash disk mode and voice prompts “USB flash disk mode” to automatically play music in USB flash disk,The memory supports 32gu disk at most. (This mode is only apply to some models, please consult local dealer for details.)

5. TWS stereo sound play

Turn on two M8 speakers enter into bluetooth mode. Short press ” “bottom of one speaker. TWS light starts to flash, the speaker will automatically search the other for TWS connection, if they connected successfully, two speakers will switch into left and right channels automatically. Repeat the bluetooth connection operation and connect to phone, If they connected successfully , music will play on the speaker shows dual stereo sound effect.

Note:
This function requires two speakers, make sure both are turned on and in the bluetooth mode. No bluetooth connection to any other devices before TWS paring. When TWS is connected, short press” “key of one speaker to cancel the interconnection.

6. Cool party lights

Party lights on is defaulted setting when you turn on speaker, Short press“ ”key to turn on/off lights. (Tip: when the volume of the mobile phone is above 70%, the party lights will present different light images with the music rhythm, and when the volume is below 70%, the light will present a slow breathing image. )

7. Type-C Quick charge

Do not use power adapter that has not been certificated by safety certification. Power adapter with output 5V 2A is recommended for charging.

1. Audio voice prompt “Out of battery”, and the red light of the charging prompt light flashes. Please charge speaker as quickly as possible.
2. This speaker supports self-adaption charging . It’s able to choose charging current automatically according to the external rated power of the adapter, When charging by USB interface on computer, the current is smaller and it takes longer time to complete charging.
3. When speaker is charging, the power light is red and always on. When speaker is fully charged, the power light is green and always on.

Energy saving:

The speaker will automatically shut down to save power under

below circumstances.

1. In bluetooth mode, after 20 minutes waiting for no device pairing.
2. In any modes, short press ” “key pause for 20 minutes without any operation the speaker will shut down automatically, Please long press the power key to turn it on again.

8. Power bank output

The USB and Type C interfaces of the same charring line are forbidden to be inserted into the speaker simultaneously.

1. USB-A OUTPUT : 5V 1A(Power bank function only works when speaker is turned on.
2. Turn on speaker insert the standard USB cable into the output interface of power bank, connect the other end to the mobile. At this time the power bank indicator is green, the green indicator will be off after mobile being fully charged.
3. Turn off speaker in the process of using speaker to charge the mobile, speaker will standby , power bank function works normally, and speaker can be awakened by long press the power key.

TECHNICAL PARAMETERS

Bluetooth version: 5.0
Charging voltage:  5V 2A
Battery capacity: 7200mA
Rated power: 40W
Product weight: 865g

TROUBLE SHOOTING

1. Can not connect to bluetooth or no sound when playing music? Please make sure the speaker is in bluetooth mode, and also make sure your device supports bluetooth function and bluetooth has already been turned on searching for devices. Check if there are too many bluetooth devices around ,which might bring difficulties of the searching process. Please turn off other bluetooth device.
2. What if TF card/USB flash disk doesn’t respond ? Please make sure TF card/USB flash disk is in good quality, and check whether the audio file is

MP3 playing format, If all problems above are excluded , it might be TF card/USB flash disk compatibility issue, you can consider of formatting TF card/USB flash disk to FAT32 or change a different TF card/USB flash disk.

HOW TO EMAIL QUICKLY?

Please scan QR code and email to us .eduplink_warranty@126.comeduplink_support@126.com

V. 6 . 0 . 2
Manufacture: Shen zhen ZhiQi Technology Co., Ltd. Address: B902 Baochengtai Square, No.38 Qinfu road, Liuyue Community, Henggang Street, Longgang District, Shenzhen. China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>