Yiwu Guansen Electronic Commerce WIFI-V1 WiFi Smart Watering Device Instruction Manual
- June 5, 2024
- Yiwu Guansen Electronic Commerce
Table of Contents
WIFI smart watering device
WIFI connectionhttps://smartapp.tuya.com/smartlife
Scan code to download APP
Product configuration
Voltage: 5V
Current: 600ma
power: 3w
Suction:2m
lift: 2.5m
noise:<65
product weight: 235g
Water pressure:2-2.5kg
Interface caliber:04mm
Product Size: 11118cm
Power supply: USB straight
1. Click to add equipment or the plus sign to connect the waterer| 2. Two
connection methods Manual connection and automatic connection| 3. Take
automatic connection as an example: first, please turn on three functions| 4.
After searching for the machine, click Next to automatically connect| 5.
After the machine automatically matches successfully, the connection is
completed
6. After the connection is complete, you can use your mobile phone to control the machine switch| 7. After the connection is successful, you can set the opening time and closing time. Cycle start Can’t connect to WiFi?| 8. This program starts at 6:20 a.m. and closes at 6:22 a.m. every day, watering for 2 minutes| 9. More other programs can be tested
COMMON PROBLEM
Can connect to WiFi?
- Please be next to the router when connecting, it’s better connection succeeded.
- Press WIFI switch mode to connect again
Can’t start after connecting?
- The working power supply needs to be 5V2A, the machine will run unstable under low voltage, please choose a standard power adapter
Will the machine be useless if there is no internet?
As long as the timing program is set in the front, the flower waterer will run
according to the previous program, and then it cannot be remotely controlled
by the mobile phone.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>