Bainbridge 3000 Escap Baintech Ultimate Off-Grid Board User Guide
- June 3, 2024
- Bainbridge
Table of Contents
- Escape Baintech Ultimate Off-Grid Board
- Step 1 – Mounting the board
- Step 2 – Mounting and Connecting the Victron Multiplus
- Step 3 – Connect the Baintech 110aH Lithium batteries in Parallel
- Step 4 – Connect the batteries to the Baintech Ultimate Off-Grid Board
- Anderson Connection Summary
- Links to product manuals
- Documents / Resources
3000 Escap Baintech Ultimate Off-Grid Board
User Guide
Escape Baintech Ultimate Off-Grid Board
Congratulations on purchasing the Baintech Ultimate Off-Grid Board, the all-
in-one solution for your off-grid adventures! Our ultimate Off-Grid Board is
Powered by Victron Energy products and features DC-DC Charging, Solar
Charging, and shore power for your battery bank. It also features an inverter
for 240v appliances and air conditioning. All of this is protected with
circuit breakers, fuses, and low-voltage cut-outs. The entire system is then
controlled and monitored through either the Touch Panel or through your
Smartphone via Bluetooth.
This is a simple Quick Start guide to get your system installed and to get you
adventuring as soon as possible.
**** 1300 224 683
salesobaintech.com.au
baintech.com.au
Step 1 – Mounting the board
The first step is mounting the Power Board in the desired location in your canopy/camper. You will need to drill your own mounting points on the board, we have left space on each of the 4 corners to do so (red dots on the diagram below). Then securely mount the board in the desired location. The board can only be mounted vertically or flat on the ground, under NO circumstances should the board be mounted facing down.
Step 2 – Mounting and Connecting the Victron Multiplus
The next step is mounting and then connecting your Victron Multiplus to the
Power Board. The Multiplus should be mounted as per specifications provided in
the provided Multiplus Manual, which is either flat on the ground or vertical
with the use of the provided mounting bracket. Once mounted, you can then
connect the board to the Multiplus. This can be done through the supplied
cables, with the red cable labeled “To Inverter +” to be connected to the
positive of Multiplus, and the black cable labeled “To Inverter -” should be
connected to the negative of the Multiplus. It should look something like the
following diagram.
To connect the AC In & Out to the unit, please consult a licensed electrician. UNDER NO CIRCUMSTANCES SHOULD THE AC IN & OUT BE CONNECTED BY UNQUALIFIED PERSONNEL, ONLY BY A LICENSED ELECTRICIAN.
Step 3 – Connect the Baintech 110aH Lithium batteries in Parallel
The next step is to run your supplied Baintech Lithium Batteries in parallel.
This can be done by connecting the supplied cables, with the red cables
labeled “Parallel +” to be connected to the positive terminals of all 3
batteries, and the black cables labeled “Parallel -” should be connected to
the negative terminals of all 3 batteries. (Ensure the black negative cables
are connected LAST). Once the batteries are connected in parallel, mount the
batteries to the floor in your desired spot. 
Step 4 – Connect the batteries to the Baintech Ultimate Off-Grid Board
The next step is to connect your batteries to the board. This can be done by connecting the supplied cables, with the red cable labeled “Battery +” to be connected to the positive terminal on the left of the battery bank, and the black cables labeled “Battery -” should be connected to the negative terminals on the right side of the battery bank. Ensure the black negative cables are connected LAST). Once the batteries are connected to the board, you can turn the battery switch on and you’re all set up to go on your next outdoor adventure!!
Anderson Connection Summary
In the above picture, the round zoomed-in photo of the Anderson plugs has a
detailed description of what each Anderson plug is for
Solar (Red Anderson): to connect the system via your unregulated solar input
DC-DC (Blue Anderson): to connect the system via your Vehicles Starter Battery
/AlternatorNon-critical (Single Grey Anderson): this is for your accessories
that don’t matter if they lose power e.g. 12v TV or certain lighting.
Critical (Double Grey Anderson): This is for accessories that need to have
power all the time e.g. fridges, CPAP machines, emergency lighting
Links to product manuals
Victron SmartSolar 100/50 MPPT:
https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_10030__100-50
/MPPT_solar_charger_manual-en.pdf
Victron Orion-TR Smart 12/12-30 DC-DC Charger:
https://www.victronenergy.com/upload/documents/Orion-Tr_Smart_DC-
DC_Charger__Isolated/Orion-Tr_Smart_DC-DC_Charger-en.pdf
Victron Cerbo GX:
https://www.victronenergy.com/upload/documents/Cerbo_GX/GX_Device_Manualen.pdf
Victron GX Tank:
https://www.victronenergy.com/upload/documents/GX_Tank_140/GX_Tank_140-en.pdf
Victron Smart BatteryProtect:
https://www.victronenergy.com/upload/documents/Manual-Smart-Battery-Protect-
12V24V-65-A-100-A–220-A-EN-NL-FR-SV-DE-PT-ES-IT-
TR.pdf
Victron Multiplus-II 3000VA:
https://www.victronenergy.com/upload/documents/MultiPlus-II_230V
/MultiPlusII___Quattro-II_120V-230V-en.pdf
Victron SmartShunt:
https://www.victronenergy.com/upload/documents/SmartShunt
/Manual_BMV_and_SmartShunt-en.pdf
Ph 07 3348 8082
Esales@baintech.com.au
‘The Power Systems Experts’
www.baintech.com.au
Documents / Resources
|
Bainbridge 3000 Escap Baintech Ultimate Off-Grid
Board
[pdf] User Guide
3000 Escap Baintech Ultimate Off-Grid Board, 3000 Escap, Baintech Ultimate
Off-Grid Board, Ultimate Off-Grid Board, Off-Grid Board, Board
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>