Lastar LS-DL024 LED Desk Lamp with Remote Control User Manual

Lastar LS-DL024 LED Desk Lamp with Remote Control

Lastar

Product Diagram

Assembly and Disassembly

1. Take out, lamps and accessories.
2. Place the hose flat, pull the power cord and enter the third part.
3. According to the direction of the arrow, align the screw holes into the lamp head.
4. Take out the screws and tighten them against the screw holes.
5. Align the clip to the edge of the table ana rotate it to the right to fix it.
6. Installation is complete, plug in the power.

Remote Control

1. Power Supply
2. Night light
3. Brightness Adjustment+
4. Color Adjustment­
5. Brightness Max
6. Color Adjustment+
7. Brightness Adjustment­s.
8. leisure Mode
9. Reading Mode
10. 1 Hour Timer
11. Entertainment Mode
12. Office Mode

Note: Remote control and lamp reset pairing operation.
Power on the light off state, long press the M button on the top of the light for Ss to enter the pairing mode, the main light breathing flashing, at this time the remote control long press any button pairing, the code success breathing turn to normal light, indicating the successful pairing code. (The above operation needs to be completed within 1 min after power on).

How to Use

Brightness Adjustment

5 levels of brightness adjustment,  (5%- 25%- 50%- 75%- 100%)  100%)  in turn, power off memory of the last brightness.

Power On / Off
Plug in the power, the light automatically lights up, the white indicator light is always on, short press the on/off button, the light turns on and off, long press the button, the timer 1 H turns on, the indicator light breathes display, long press again to cancel the timing function, the indicator light is always on.

Color Temperature
5 levels of color temperature adjustment, (3000K-3B00K-4500K-5500K-6500K) in turn cycle, power off memory of the last color temperature.

Note: Compatible for Smart Plug.

Specifications

Caution

• Please do not dismantle the product by yourself, always ask a professional electrician or authorized technician for repairs.
• If you smell a bad odor or anything unusual, please turn off the unit immediately.
• Please do not remove the power cable with wet hands as it may cause an electric shock.
• Do not put this unit near extreme heat sources, moisture, or corro­sive substances.
• Clean the lamp with a dry doth when needed.
• Please store the lamp in a dry and shady place if not being used for a long period of time.
• Use the original power adapter to power the lamp. A wrong input may damage the lamp.

FCC Compliance

This device complies with Part 1 S of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received including inter­ference that may cause undesired operation.

Statement
We can only provide after-sale services for the products that are sold by authorized sellers. If you have purchased from an unauthorized seller, please contact them directly for service or warranty issues.

Warranty & Customer support

This product is intended for domestic use only. Lastar will repair or replace the product, or any part of this product, (excluding batteries) free of charge if within 12 months of the date of purchase, it can be shown to have failed through defective workmanship or materials. This guarantee covers working parts that affect the function of the product. It does not cover cosmetic deterioration caused by fair wear and tear or damage caused by accident or misuse. Lastar shall not be responsible for any type of incidental, consequential or special damages. Opening or taking apart the product or its components will void the guarantee. Claims under guarantee must be supported by proof of purchase and be returned carriage paid to Lastar. Care should be taken in packing the product so that it is not damaged while in transit. This undertaking is in addition to a consumer’s statutory rights and does not affect those rights in any way.
For questions, support. or warranty claims, contact us at the email address below. Please do include your Amazon order number and product model number.

Lastar
Manufacturer: Shenzhen Chuanming Technology Co., Ltd
Address; Room 900, Block A. Zhongguan Times Square , NoA16S Liuxian Avenue, Nanshan District. Shenzhen, China 518000
E-mail: service@lastarhome.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>