BLUE WEAR 35X4522 Rough Workwear Work Gloves Instruction Manual

: October 30, 2023
: BLUE WEAR

Table of Contents

BLUE WEAR 35X4522 Rough Workwear Work Gloves
Product Information
Size

BLUE WEAR 35X4522 Rough Workwear Work Gloves

Product Information

The product is a pair of Rough Workwear gloves with item number 016523 manufactured by Jula AB. The gloves are made in China and comply with Regulation (EU) 2016/425 Personal Protective Equipment. The product has CE marking to demonstrate this compliance and meets the standards EN ISO 21420:2020, EN 388:2016+A1:2018.

Size

The size of the gloves is 10.

Notified Body

The notified body involved in the certification process is CTC, Parc Sc. T. Garn. – 4, rue Herm. Frenkel 69367 Lyon Cedex 07, France.

Usage Instructions

Ensure that the gloves fit properly before use and that there is no damage to the gloves.
Wear gloves during work to protect your hands.
After use, remove the gloves carefully and store them in a clean and dry place.
Do not use the gloves for any purpose other than what they are intended for.
Do not use the gloves if they are damaged or torn.
Do not use the gloves near open flames or other sources of heat.
Do not use gloves in areas with chemicals or other hazardous materials without proper protection.
Clean the gloves regularly using mild soap and water, and allow them to dry completely before use.

By following these instructions, you can ensure that the Rough Workwear gloves provide adequate protection during work.

WARNING! Gloves shall not be worn when there is a risk of entanglement by moving parts of the machine. The durability of the gloves depends on how they are used. Always check that the gloves are in good condition before using them. Keep the gloves in a clean, dry and ventilated place, free from moisture, dirt, mold, and sunlight. Do not leave the gloves in contaminated condition if they are going to be reused. Remove as much as possible of any contamination from the gloves after using them. Dispose of in accordance with current legislation. The materials used are not known to cause allergies. If any reaction occurs discontinue use.

Item number: 016526, 016521, 016522, 016523, 016524
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN: This declaration of conformity is issued under the sole responsibility of the manufacturer.

ASSEMBLY GLOVES PU

Size 7, 8, 9, 10, 11 Conforms to the following directives, regulations, and standards

Directive/Regulati on	Harmonized standa rd
PPE (EU) 2016/425	EN ISO 21420:2020, EN 388:2016+A1:2018

Cat II

The PPE is identical to the PPE which is subject to EU type-examination certificate No: 0075/2169/162/10/21/1784
Name and address of the notified body involved: CTC Parc Sc. T. Garn. – 4, rue Herm. Frenkel, 69367 Lyon Cedex 07, France NB 0075
This product was CE marked in a year:
Skara: 2022-03-01
Item no. 016523
Jula AB
www.jula.com.
Box 363, SE-532 24 Skara
Made in China
Notified body/Jednostka notyfikowana No. 0075:
CTC, Parc Sc. T. Garn. – 4, rue Herm.
Frenkel 69367 Lyon Cedex 07, France.
These gloves bear CE marking to demonstrate compliance with Regulation (EU) 2016/425 Personal Protective Equipment and meet the standards
ISO 21420: 2020, EN 388:2016+A1:2018.