OVERMAX X-Monster 3.0 RC Land Vehicle Car User Manual
- June 5, 2024
- OVERMAX
Table of Contents
OVERMAX X-Monster 3.0 RC Land Vehicle Car
INTRODUCTION
Dear customer!
Thank you for placing trust in us and choosing Overmax. Thanks to the use of
high-quality materials and modern solutions, we pro-vide you with a product
perfect for everyday use. We are convinced that the product will satisfy your
requirements as it has been designed with utmost care. Before you start using
the product, please read this manual carefully. Should you have any remarks or
questions concerning the product, please do not hesitate to contact us:
pomoctechniczna@overmax.pl
Important:
Please read this manual before you start using the product to see all its functions and use them in accordance with intended use.
- Do not repair or modify the device. Only an authorized service techni-cian is allowed to perform these operations.
- Do not switch the device on if you have noticed any damage.
- Do not use the device when it acts up, has been dropped or immer-sed in water, overheats extensively, is discolored or deformed, and when other atypical circumstances occur. Contact the manufacturer’s authorized service center.
- Never leave the charging battery unattended.
- The device is intended for persons aged above 14. Do not let younger children play with it. Keep the device out of reach of children.
- Use the device away from sources of heat, high temperatures, hot surfaces, direct sunlight, source of ignition, naked flame, oils and sharp edges.
- Do not use the device in inflammable, explosive or toxic atmosphere.
- Do not use chemicals to clean the device.
- After every use, switch the device off and disconnect the battery.
- Do not immerse the entire device in water or other liquids. Do not use the device near water.
- Before you start cleaning or moving the device, switch it off.
- Do not use the device for other purposes than designed.
- Keep the device away from sharp items.
- Do not place other items on the device when you use it.
- Use the device on flat and hard surfaces only. Avoid going on sand, grass or other surfaces which may lead to damage.
- To charge a battery, use a supplied charging cable only.
- After every charging, disconnect the charging cable from USB port.
- Pay attention to battery polarization in the device and controller.
- In the device use the supplied battery only, in the controller three batteries AA 1,5V are used (they are not supplied). In the controller do not use storage batteries.
- After the use, do not touch a car engine because it may be extremely hot.
DEVICE OUTLINE
CONTROLLER OUTLINE
HOW TO ASSEMBLE BATTERY IN THE CONTROLLER
- Remove battery cover.
- Insert three batteries AA 1,5 V. Pay special attention to battery poles.
HOW TO CHARGE CAR BATTERY
- Switch the car off.
- Connect the charging cable to USB port in the PC or USB feeder. Next, connect the battery to the charging cable. When charging, green LED will flash.
- Connect the battery to the charging cable.
- When the battery is full, green LED will be on continuously. After charging, disconnect the battery from the charging cable.
- Turn the knob to the left or right to make the car turn.
- Once you have finished, switch the controller and car off and disconnect the baAttery.
TURN ADJUSTMENT
If you notice that the car turns aside instead of going straight, you can
adjust the turn with the controller adjustment.
CLEANING AND MAINTENANCE
- Before you start cleaning, switch the device off and disconnect the battery.
- Clean the car and controller with wet cloth.
- Do not use chemicals to clean the device.
- After every use, remove sand and dust from the car.
The pictures are for reference only. The real design of the products may differ from the pictures presented.