OVERMAX Camspot 3.7 Pro Indoor Rotating WiFi Ip Camera User Manual
- October 30, 2023
- OVERMAX
Table of Contents
OVERMAX Camspot 3.7 Pro
Indoor Rotating WiFi Ip Camera
User Manual
Camspot 3.7 Pro Indoor Rotating WiFi Ip Camera
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective
collection.
The product must not be disposed of along with domestic waste as it may pose a
threat to the environment and human health. The worn-out product must be
handed over to the electrics and electronics recycling center.
Introduction
Dear customer!
Thank you for placing trust in us and choosing Overmax.
Thanks to high-quality materials and modern solutions, we provide you with a
product perfect for everyday use. We are convinced that the product will
satisfy your requirements as it has been manufactured with utmost care. Before
you use the product, please read this manual carefully.
Should you have any remarks or questions concerning the product, please do not
hesitate to contact us:
[email protected]
Information about the device
Frequency: 2.412-2.472 GHz
Indoor camera
Power supply: 5V DC 1.5A
The set (fig. A)
- Camera
- Mounting bracket
- Screws and mounting pins
- Power supply
- USB cable
Device description
(fig. B)
- Microphone
- Lens
- Light sensor
- Infrared diodes
- MicroSD card slot
- Reset
- Speaker
- Power supply socket (5V DC 1.5A)
Downloading by application (fig. 1)
https://smartapp.tuya.com/overmaxcontrol
Search for the “Overmax Control” app in the iOS Store / Google Play or scan the QR code and download the app. You can download it for iOS and Android.
2. Registering a new user (fig. 2 and 3)
- To register for the application, click on the “Register” box and then read and accept the Privacy Policy.
- Enter your email address to receive your verification code.
- Enter your verification code in the blank field.
- Enter your individual password and select “Finish”.
3. Logging in to an existing account
- In order to log in to an existing account, select “Log in using an existing account” (fig. 2).
- Select the appropriate country/region.
- Enter your email address and password, then log in.
4. Manually adding the device in the application (fig. 4)
The product only supports 2.4GHz Wi-Fi and does not support 5GHz
Wi-Fi. Before setting up Wi-Fi, set your router parameters. The Wi-Fi password
should not contain special characters.
-
Make sure the router and camera are as close together as possible to allow for quick setup of the device.
-
Connect your mobile device to the local Wi-Fi network to which the camera will be connected, then select “My home”. Select „Add device” and „Add manually”, then select the „Camspot 3.7 Pro” device.
-
Select your Wi-Fi network and enter your password.
-
You can add the device using Auto Scan, which allows your phone to automatically search for nearby Wi-Fi enabled devices.
-
Press and hold the “Reset” button for 5 seconds to restore the factory settings. Click „Next step” and continue.
-
To pair the camera, scan the QR code from the phone screen through the camera lens, holding the camera 15-20cm away. Try to hold your mobile phone in a stable position while scanning. When you hear the sound signal, click “I heard the sound”.
Wait for the device to complete the configuration. -
After adding the device, click „Finish” to finish adding the device (fig. 5).
{“p”:”BLGW1f1#@18″,”s”:”BLG_Wew_Klucz”,”t”:”EUCBmIPkNH0z8T”}
5. Description of the mobile application functions (fig. 6)
| 
---|---
Real-time preview interface:
1. HD/SD – change recording resolution FullHD / HD
2. Volume control
3. Zoom
4. Full screen
5. Photo
6. Two-way audio communication
7. Video recording
8. Play (microSD card FAT32 required, max. 128 GB)
9. Gallery
10. Bright/dark application mode
11. Private mode (allows you to limit data transfer by turning off the
camera)| 12. Night mode
13. Motion tracking
14. Motion sensor
15. Sound sensor
16. Control
17. Locations
18. Cloud
19. Smart functions
20. Patrol function
21. Alarm (switches off automatically after 10 seconds)
22. Edition
---|---
In order to access the camera view via a web browser, turn on the “Overmax
Control” application, click on add the device, then scan the QR code displayed
in the browser of your computer.
Live camera preview at: https://ipc-eu.ismartlife.me/login
Mounting
- Place the camera on a flat surface of a desk or table (fig. 7).
- To mount the camera on a wall/ceiling, use the mounting bracket included in the set. Make sure the surface is clean (fig. 8).
Google Assistant/Alexa function
- If you wish to use this function, you will need to download the Tuya Smart app.
- The Tuya Smart app is free and available for Android (Google Play) and iOS (App Store) devices.
Troubleshooting
| Question | Answer |
|---|---|
| How do I restore the factory settings on my device? | Remove the camera from |
the device list in the app or press and hold the reset button for 5 seconds
until you hear the sound.
After selecting the 2.4GHz Wi- Fi network and entering the correct password,
the camera still cannot connect.| Make sure your phone and camera are
connected to the same network.
Make sure that the DHCP protocol is enabled.
Press and hold the reset button for 8 seconds to reset the device.
Make sure the Wi-Fi signal strength is high.
How can I change the router the camera is connected to?| Remove the camera
from the device list in the app or press and hold the reset button for 8
seconds until you hear the sound. Then reconfigure the device.
The microSD card is notrecognized by the device.| Check the camera settings
and make sure you have enabled saving to a microSD card. The device can
support up to 128GB cards. Make sure the card is not damaged and supports the
FAT32 format.
Why am I not receivinga notification when the device detects movement?| Make
sure your phone and app have push notifications enabled.
Illustrations are provided for information purposes only. The actual appearance of the products may differ from the images shown.