Gude GEH 2000 P Electric Fan Heater Instruction Manual

Gude GEH 2000 P Electric Fan Heater

Operation

Transport / storage

Technical Data

• Specified Conditions Of Use
• Electric heaters are used in construction, shipbuilding, agriculture, car repair services, gastronomy, installations and where oil or gas heaters are not required or permitted.
• The device may only be operated standing on the ground and fully assembled. Operating on an unstable surface is not permitted.
• Do not use this product in any other way as stated for normal use. Respecting technical data and safety precautions.
• Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Power tool description

1.  Handle
2.  Power supply cable
3.  Protective grille
4.  Switch Power regulator
5.  Thermostat regulator

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3.  Number of injured persons
4.  Injury type(s)

Requirements for operating staff The operating staff must carefully read the Operating

Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.
Minimum age: The product has been designed to be used by persons over 16 years of age. If the product is to be used by children below the age of 8 or persons with reduced physical, sensory or mental skills or with a lack of experience and knowledge, they must be supervised or instructed in the safe use of the appliance and understand the resulting risks. Children must not play with the appliance. Cleaning and user maintenance must not be performed by children without supervision.
Training: Using the appliance only requires corresponding training by a professional or the Operating
Instructions. No special training is necessary. The operator is responsible for accidents or risks to third parties.

Symbols

General Power Tool Safety Warnings

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term „power tool“ in the warnings refers to your mains-operated (cordepower tool or battery- operated (cordless) power tool. Residual risks Danger of injury !

Electrical residue risk

Direct/indirect electrical contact may lead to electric shock. The appliance is to be operated only in electrical networks with protective RCD. Thermal residual risks Burns; Touching the protective grille or housing body can cause burns. Avoid these parts. Despite compliance with all relevant building regulations, there still can be some threats during operation.

Work area safety

•  Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•  Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
•  Keep children and bystanders away while operating a power tool.

Electrical safety

•  Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (groundepower tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
•  Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
•  Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
•  Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock..
•  When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Power tool use and care

•  Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
•  Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
•  Disconnect the plug from the power source and/ or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Such preventive safety measures reduce the risk of starting the power tool accidentally.
•  Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

•  Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructions

• Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
• The machine must be plugged to 230 V with 16 A fuse.
• Switch the machine off and unplug it when unattended.
• Check all screw and plug-in connections and protective equipment if firm and tightened properly and whether all moving parts are running smooth whenever the appliance is to be put into operation.
• The protective equipment on the appliance is strictly prohibited to be disassembled, changed, used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers.
• The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
• Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents.
•  When using the appliance, it is essential to always comply with the relevant local building and fire regulations, appropriate electrical protection and regulations of professional associations.
•  Ensure a safe distance from flammable items.
•  Free air inlet and outlet must always be provided.
•  Never put any foreign items into the appliance.
•  The appliance must never be covered during operation.
•  The safety equipment must not be bridged or blocked.
•  The appliance must never be directly under a wall socket during operation.
•  The machine is not suitable to be installed on fixed installed power cables.
•  Operate the machine only with a fully unwound electric cable.
•  Never immerse the machine in water – danger to life!
•  Never place the machine near wet areas or wet sources (bathroom, shower, swimming pool, etc.). A person in shower, in a container filled with water or in bath must not touch the control elements.
•  Never touch the machine with wet hands when in operation.
•  Place the machine so that the mains plug is accessible at any time.
•  The appliance must not be exposed to direct water flow (e.g. high pressure cleaners, etc.). Water must never enter the appliance.
•  Do not place and operate the appliance in areas with a risk of fire and explosion.
•  The appliance must not be installed in an atmosphere laden with oil, sulphur and salt.
•  Do not place the machine in areas with a risk of fire (e.g. woodshed).
•  Do not use the machine in animal production or animal husbandry.
•  Keep a sufficient distance from walls and other objects.
•  The protective grille is hot – provide a safe distance of persons, children and animals. Do not place any combustible or fusible objects in front of the appliance.
•  Never put the machine on high-pile carpets.
• Keep persons, children, animals and flammable items in a safe distance, at least 2 metres from the front side and app. 60 cm from all other surfaces of the housing body.

Operation

The appliance can be put into operation after you have read and understood the safety instructions. To achieve optimum heat distribution, place the electric heater in the middle of the room if possible or at least 2 metres from the wall. As a result, the air will circulate better and the room will be heated quicker. All windows and doors should stay closed.

•  Connect the power cable to a suitable outlet. Ensure appropriate protection of your electrical network.
•  Set the desired performance using the performance degree regulator.
•  To turn the electric heater off, move the 3-5 min. performance regulator button to the ´fan´ position. The appliance can then be turned off or unplugged.
• Unpleasant odour can be smelled at the first startup of the appliance under certain circumstances; however, the odour is absolutely harmless and vanishes completely with an increased time of operation.

Maintenance

Before carrying out any work on the machine, disconnect the plug from the socket. WARNING The machine must not be used under any circumstances if the machine or the safety devices are damaged. Repairs and works specified in these Instructions may only be performed by qualified authorised staff. Use only original accessories and original spare parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries. Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making. If necessary, a list of spare parts can be found at
www.guede.com

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Disposal

Disposal notes are based on the icons placed on the machine or on its package. Do not put electrical appliances to household waste – use collection centres in your town. Ask the municipality authorities where such collection centres can be found. If electrical appliances are disposed in an uncontrolled manner, hazardous substances can get into ground water through the weather and – as a result – penetrate the food chain or poison the flora and fauna for a number of years. When the appliance is to be changed for a new one, the seller is legally obliged to accept the old appliance, at least for free disposal.

Transport packaging disposal

The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environment aspects and waste treatment principles and are therefore recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packaging (e.g. foils, styropor®) can be dangerous for children. Risk of suffocation! Keep the packaging out of reach of children and dispose of them as quickly as possible.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:

• Serial No.:
• Art. No:
• Year of production:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>