ENFORCER SM-4105-LQ Steel-Door Recessed-Mount Contact User Manual
- June 5, 2024
- ENFORCER
Table of Contents
ENFORCER SM-4105-LQ Steel-Door Recessed-Mount Contact
Instruction
- Used for steel-framed doors and windows where space is limited or to avoid unsightly installations
- Strong, one-piece construction
- 18″ (46cm) Wire leads
- High-impact ABS plastic
- Sitch and magnet have ribs for securing in holes
- The contact reed switch is SPST, iridium-plated to have a high melting point and Vickers hardness for higher power handling and longer expected life
- For closed-loop circuits
- 1″ (25mm) Gap
- Lifetime limited warranty
Parts List
- 10x Contact switches
- 1x Manual
- 10x Magnets
Overview
Protected side of the door/window.
Specifications
| Model | SM-4105-LQ/W | SM-4105-LQ/B |
|---|---|---|
| Loop type | Closed-loop | |
| Electrical configuration | N.O. (SPST) | |
| Operation gap | 1″ (25mm) | |
| Connectors | 18″ (46cm) Leads | |
| Housing color | White | Brown |
| Material | Case | High-impact ABS plastic |
| Contacts | Iridium-plated | |
| Contact rating | 1.0A@10VDC (max.) |
10W (max.)
Operating temperature| -15°~160° F (-25°~70° C)
Switch cycles| 50 Million (0.1mA@5VDC)
Dimensions| Switch| 13/16“xø15/16” (30xø24 mm)
Magnet| 13/16“xø15/16” (30xø24 mm)
Magnet type| Rare-earth neodymium alloy
Installation
Please read the manual carefully before you begin the installation.
- Mount the contact above the door or window in the frame. For doors, ensure that the mounting is farthest from the hinged side of the door.
- Connect the two wires to the alarm control panel.
- Mount the magnet in the door/window so that it will face the contact. Be sure that the gap between the contact and magnet does not exceed 1″ (25mm).
California Proposition 65 Warning:
These products may contain chemicals that are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
LIMITED LIFETIME WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO-LARM be responsible for any costs or charges for removal, installation, or reinstallation. This Warranty is void if the damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to repair or replacement only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. This lifetime limited warranty is for products sold and installed in the United States and Canada. For all other countries, the warranty is 1 (one) year.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For
that reason, SECO-LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints. All trademarks are
the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright ©
2022 SECO-LARM U.S.A., Inc. All rights reserved.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 Phone: 949-261-2999 | 800-662-0800. Website: www.seco- larm.com Email: sales@seco-larm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>