11s Redmi Note smart phone User Manual
- June 5, 2024
- Mi
Table of Contents
11s Redmi Note smart phone
User Manual
Redmi Note 11S
Safety Information
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this
GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and Wi-Fi 2201117SY
is in compliance with the essential requirements and other relevant provisions
of the RE Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized 10-gram SAR for head and
trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands and placed in positions that
simulate RF exposure during use against the head with no separation and near
the body with a separation of 5 mm.
SAR compliance for body operation is based on a separation distance of 5 mm
between the unit and the human body. This device should be carried at least 5
mm away from the body to ensure RF exposure level is compliant or lower than
the reported level. When attaching the device near the body, a belt clip or
holster should be used which does not contain metallic components and allows
separation of at least 5 mm to be maintained between the device and the body.
RF exposure compliance was not tested or certified with any accessory
containing metal worn on the body, and the use of such an accessory should be
avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Head: 0.595 W/Kg, Body: 0.936 W/Kg (5 mm distance).
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
GSM 900: 35.5 dBm
GSM 1800: 32.5 dBm
WCDMA band 1/8: 25.7 dBm
LTE band 1/3/7/8/20/28/38/40/41(2535-2655MHz): 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to
5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
NFC: 13.56 MHz < 42 dBuA/m at 10m
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy. The exposure standard for wireless
devices employs a unit of measurement known as Specific Absorption Rate or
SAR.
The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device
has been tested and meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and positions the device a minimum of 1.5 cm
from the body. RF exposure compliance with any body-worn accessory that
contains metal was not tested and certified, and the use of such body-worn
accessories should be avoided. Any accessory used with this device for body-
worn operation must keep the device a minimum of 1.5 cm away from the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification or open
Settings and type “Certification” into the search bar.
Model: 2201117SY
2201 indicates that this product will be launched after 202201.