better bathrooms BeBa-27694 Zorah Wall Mounted Basin Mixer Matt Black User Manual

better bathrooms BeBa-27694 Zorah Wall Mounted Basin Mixer Matt Black

Product

• BeBa_27694 – Zorah Wall Mounted Basin Mixer Matt Black
• BeBa_27695 – Zorah Wall Mounted Basin Mixer Brushed Brass
• BeBa_27696 – Zorah Wall Mounted Basin Mixer – Brushed Gunmetal

Congratulations on your purchase

And welcome to our growing gang of savvy shoppers We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

• log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
• contact us via betterbathrooms.com/content/contact-us

Important information

• Please read these instructions thoroughly and retain for future reference
• Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.
• The system must be flushed prior to installation
• Minimum and Maximum working pressure : 0.2 – 5 bar
• Pressures must be equal for optimum performance
• Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.
• The feed-water temperature of water shall not exceed 85°C. Exceeding 85°may cause scalding, the service life of faucets might be shortened, or the faucet might be damaged.
• After installation, please make sure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

Dimensions

Tools required

• Screw driver
• Drill and Bit
• Spanner
• PTFE Seal tape
• Spirit Level

Installation

Operation

Maintenance

Replacement of Cartridge CLEANING OF AERATOR

To avoid the dust and impurities from construction that migh influence the water flow, it is suggested to clean the aerator Lmapuular hasis

Troubleshooting

·           Is there blockage with filter mesh of aerator

·         Is the supply isolation valve fully open

Water leak| ·         Are all connections tightened

·         Has sufficient sealing tape been used

·         Is there damage or dirt within the O-rings of cartridge

·         Is there damage or dirt on the O-rings on the connector of spout

·         Is the screw at the bottom of spout is fully tightened

·         Is there damage or dirt on the rubber washer on top of aerator

Water not mixing| ·         Are the pressures equal
Handle Loose| ·         Is the screw inside the handle fully tightened

·         Is the locknut on top of cartridge fully tightened

Spout Loose| ·         Is the screw at the bottom of spout is fully tightened

Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.

For more information

• visit betterbathrooms.com
• email customerservices@buyitdirect.co.uk
• call 03303903062
• write to Trident Business Park, Neptune Way, Huddersfield, HD2 1UA

References

• Better Bathrooms - Login

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>