Gude GDS 150 L Double Grinder Instruction Manual

GDS 150 L/GDS 200 L 55122-Double Grinder
Instruction Manual

Please read the instructions carefully before starting the machine.
DELIVERED ITEMS

POWER TOOL DESCRIPTION

Assembly

Operation

Leveling

Change grinding wheel

Transport/Storage

Technical Data

Duplex grinding machine GDS 150 L
Art. No ……………………………………………………………………..55121
 Service connection …………………………….230 V~50 Hz
 Max. Power …………………………350 w (P1/S2/30 min.)
 Idle speed ……………………………………………….2950 min-1
 Grinding wheel dimensions …………………..150×20 mm
 Engine shaft diameter ………………………………12,7 mm
 weight …………………………………………………………….. 9,5 kg
Noise and Vibration Information
Sound pressure level LpA 1), 2) ……………………………..82 dB (A)
Guaranteed sound power level LwA 2) …………….. 92 dB (A)
wear ear protectors! 1)
Measured according to EN ISO 11202:1995/AC:1997, under load, Uncertainty K=3 dB (A)| Duplex grinding machine gods 200 L
Art. No ……………………………………………………………………..55122
 Service connection …………………………….230 V~50 Hz
 Max. Power …………………………550 w (P1/S2/30 min.)
 Idle speed ……………………………………………….2950 min -1
 Grinding wheel dimensions …………………..200×25 mm
 Engine shaft diameter …………………………………16 mm
 weight ……………………………………………………………… 15 kg
Noise and Vibration Information
Sound pressure level LpA 1), 2) ……………………………..86 dB (A)
Guaranteed sound power level LwA 2) …………….. 96 dB (A)
wear ear protectors!

1. Measured according to EN ISO 11202:1995/AC:1997, under load, Uncertainty K=3 dB (A)
   ---|---

2. The values stated are emission values and as such do not necessarily constitute values that are safe for the workplace. Although there is a correlation between emission levels and environmental impact levels, whether further precautions are necessary cannot be derived from this. Factors influencing the actual present environmental impact level in the workplace include the characteristics of the work area and other noise sources, i.e. the number of machines and other neighboring work processes. The permitted workplace values can likewise vary from country to country. This information is intended to assist the user in estimating hazards and risks.

Read and understand the operating instructions before using the appliance. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
In case of any doubts about connection and operation refer please to our customer center
Specified Conditions Of Use
Double grinding machines for removing frays, grinding, and sharpening steel and steel alloy workpieces do not use this product in any other way as stated for normal use. Respecting technical data and safety precautions. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Power tool description

1. LED-Lamp
2. Grinding wheel with magnifier
3. K60 abrasive wheel
4. workpiece support
5. ON/OFF switch
6. Socket
7. work table installation opening
8. Protective wheel
9. K36 abrasive wheel
10. Abrasive wheel cover
11. Leveling
12. Protection against sparks

Residual risks
The danger of injury!
Never put your hands on the abrasive wheel area.
Risk of injury for fingers and hands due to rotating abrasive wheels in case of unprofessional guiding or supporting of the workpiece being ground.
In spite of compliance with all relevant design regulations, dangers may still present themselves when the machine is operated, e.g.:

• workpiece parts being thrown off,
• parts of damaged tools being thrown off,
• noise emissions,
• dust emissions.

Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used.
If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Requirements for operating staff
The operating staff must carefully read the Operating Instructions before using the appliance.
qualification:  Apart from the detailed instructions by a professional, no special qualification is necessary for appliance use.
Minimum age:  Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.
Training:  Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third parties.

Symbols

power tool.
| wear a respirator!| | Keep bystanders in a safe distance from the appliance (at least 5m)
| wear protective gloves!| | warning against thrown-off items
| wear safety shoes with steel reinforcement!| | warning against risk of drawing-in
| No touching inside| | Any damaged or disposed electric or electronic devices must be delivered to
appropriate collection centres.
| Protect against humidity
Never expose the tool to rain.| | Protect against humidity
| Forbidden operation for persons with chainlet| | This side up
| Forbidden operation for persons with long hair.| |

General Power Tool Safety warnings

warning
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool“ in the warnings refers to your mains-operated (corded power tool or battery-operated (cordless) power tool.

1. Work area safety
   a) Keep the work area clean and well-lit.  Cluttered or dark areas invite accidents.
   b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
   c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety
   a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
   b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   c) Do not expose power tools to rain or wet conditions. water entering a power tool will increase the risk of electric shock.
   d) Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.  Damaged or entangled cords increase the risk of electric shock.
   e) when operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
   f) If operating a power tool in a damp location is unavoidable, use a residual current device (protected supply. The use of an RCD reduces the risk of electric shock.

3. Personal safety
   a) Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.  A moment of inattention while operating power tools may result in serious personal injury.
   b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
   c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
   d) Remove any adjusting key or wrench before turning the power tool on.  A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   e) Do not overreach. Keep proper footing and balance at all times.  This enables better control of the power tool in unexpected situations.
   f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
   g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.  The use of dust collection can reduce dust-related hazards.

4. Power tool use and care
   a) Do not force the power tool. Use the correct power tool for your application.  The correct power tool will do the job better and safer at the rate at which it was designed.
   b) Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.  Power tools are dangerous in the hands of untrained users.
   e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service
   a) Have your power tool serviced by a qualified repair person using only identical replacement parts.  This will ensure that the safety of the power tool is maintained.

Safety instructions Duplex grinding machine
Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
The machine must be plugged into 230 V with a 16 A fuse.
Wear ear protectors. Exposure to noise can cause hearing loss.
Wear protective glasses
WARNING The dust produced when using this tool may be harmful to health. Do not inhale the dust. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
The power tool must stand or be fixed to a horizontal and level surface (e.g. work table)
Switch the machine off and unplug it when unattended.
Check all screw and plug-in connections and protective equipment if firm and tightened properly and whether all moving parts are running smoothly whenever the appliance is to be put into operation.
The protective equipment on the appliance is strictly prohibited to be disassembled, changed, or used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers.
The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
Any defect on the power tool, including on the protective equipment or abrasive wheel must be reported to a safety engineer immediately after it is identified.
Before use check the machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorized Service Agents.
Make sure the abrasive wheel is fitted properly before pressing the On/Off button.
To make sure the work is safe, use equipment such as power tool supports, magnifying glass, workpiece holder, etc.
Removing sawdust and chippings from the machine when running is strictly prohibited.
Do not use blunt, damaged, or distorted circular saw blades.
Choose the abrasive wheel suitable for the given workpiece.
Abrasive wheels not corresponding to the characteristics given in these Operating Instructions may not be used.
The maximum revolutions given on the abrasive wheel must be respected.
Familiarise with the safety procedures for cleaning, maintenance, and regular removal of sawdust and dust to reduce the risk of fire.
Make sure the flange used is suitable for the given purpose of use, as specified by the manufacturer.
The power tool must immediately be switched off if it gets blocked. Unplug the power tool and remove the stuck workpiece.
At frequent intervals, check the adjustment of the protection against sparks and set the abrasive wheel wear properly. Keep the distance between the protection against sparks and the abrasive wheel small if possible (max. 2 mm).
At regular intervals, check the workpiece support adjustment and set the abrasive wheel wear properly.
Do not grind with a cold abrasive wheel. Let the abrasive wheel run idle for one minute before starting your work.
Do not grind on the side surfaces of the wheel. Grind on the front side only.
Do not apply the coolant directly to the abrasive wheel. The coolant may affect the adhesion of the abrasive wheel and cause its failure.
Abrasive wheel to be leveled on the front side only. High temperatures are present when grinding. Do not touch the workpiece before it has sufficiently cooled down.
IMPORTANT NOTICE
The engine is automatically switched off when overloaded. The engine can be switched on again after it has cooled down (various times).
Hold the workpieces firmly using the holder (e.g. by pliers) to prevent injuries.

Maintenance

Before carrying out any work on the machine, disconnect the plug from the socket.
WARNING The machine must not be used under any circumstances if the machine or the safety devices are damaged.
Repairs and works specified in these Instructions may only be performed by qualified authorized staff.
At all times, keep the machine, and ventilation slots, in particular, clean. The sawdust ejection and/or dust exhauster should be cleaned at regular intervals. Never spray water on the machine!
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.
Apply environment-friendly oil to all moving parts.
If necessary, a list of spare parts can be found at www.guede.com.

Guarantee

the warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defects or manufacturing defects. An original payment voucher with the date of the sale needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorized use such as appliance overloading, use of violence, or damage as a result of any unauthorized interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Disposal

Disposal notes are based on the icons placed on the machine or on its package.
Do not put electrical appliances into household waste – use collection centers in your town. Ask the municipality authorities where such collection centers can be found. If electrical appliances are disposed of in an uncontrolled manner, hazardous substances can get into groundwater through the weather and – as a result – penetrate the food chain or poison the flora and fauna for a number of years. when the appliance is to be changed for a new one, the seller is legally obliged to accept the old appliance, at least for free disposal.
Transport packaging disposal
The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environmental aspects and waste treatment principles and are therefore recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packaging (e.g. foils, styropor®) can be dangerous for children.
Risk of suffocation! Keep the packaging out of reach of children and dispose of them as quickly as possible.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? we will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:
Serial No.: —————————
Art. No: —————————-
Year of production: ————–

EC-DECLARATION OF CONFORMITY
We, hereby declare the conception and construction of the below-mentioned appliances correspond – at the type of construction being launched – to the appropriate basic safety and hygienic requirements of EC Directives. In case of any change to the appliance not discussed with us the Declaration expires.
Duplex grinding machine:
GDS 150 L # 55121
GDS 200 L # 55122
Appropriate EU Directives:
2006/42/EC
2004/108/EC
Harmonized standards used
EN 55014-1:2006+A1
EN 61000-3-2:2006+A1+A2
EN 61000-3-3:2008
EN 55014-2:1997+A1+A2
EN 61029-1:2009+A11

Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany
Wolpertshausen, 2013-02-15
Joachim Bürkle,
GÜDE GmbH & Co. KG,
Birkichstrasse 6, 74549 Wolpertshausen,
Germany

Technical documentation
Managing Director

GÜDE GmbH & Co. KG
birkichstrasse 6
74549 wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
2013-06-27

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>