Comfort Zone COM-18BK 18 Inch Stand Fan Instruction Manual
- June 5, 2024
- Comfort Zone
Table of Contents
MANUAL INSTRUCTION
18INCH STAND FAN
MODEL NO: COM-18BK
Importer by : ROMICO J.T. TRADERS LTD 11 DIOS STR..
1058 NICOSIA-CYPRUS P.O.BOX 24997-1306. NICOSIA CYPRUS Made in P.R.C.
Read all Instructions before Using
Warning: To reduce the risk of fire, electrical shock, and injury to a person, the following must be adhered to
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities. or lack of experience and knowledge. unless they have been given supervision or instruction concerning use of the appliance by a person responsible for thew safely
- Children should be supervised to ensure that they do not play with the appliance.
- The product is for household use only.
- Conned the appliance to a single-phase AC supply voltage. specified on the rating plate.
- Never leave the fan unattended while it is in use. Always turn the fan to the ‘OFF’ position. and unplug the tan from the electrical outlet socket. when not in use.
- Extreme caution is necessary when any fan is used by or near children. invalids or elderly persons, and whenever the fan is left operating unattended.
- The fan cord must not be placed under carpets or covered with throw rugs, runners or similar. Arrange the cord away from the traffic area, and where it will not be tripped over.
- Do not operate the fan with a damaged cord or plug. or after the fan malfunctions, or has been dropped. or damaged in any manner
- If the supply cord is damaged, either the manufacturer. or the service agent, or a similarly qualified person, must replace it. to avoid a hazard.
- Use the fan in a well-ventilated area. While in use, ensure that the mistakes or exhaust openings are not blocked unexpectedly. and the fan distance from the wall or corner must be no less than 20cm. The fan should not be placed below or besides any curtains or similar
- To avoid mechanical danger when in use, do not insert. or allow fingers. or any other objects into the grill. Do not block the air-Intakes or the exhaust openings in any manner.
- The fan must only be placed and used on a flat dry floor.
Assembly Instructions
The fan is packaged with its grills un-attached. You must attach the gulls
before operating the fan. Warning: Never operate the fan without its
foundation and other pans. The fan must only operate in the upright position,
and any other position will be hazardous. To operate the fan only in an
upright position: any other position could create a hazardous situation.
Assemble the foundation and other parts of the appliance in the following
sequence.
a). Unpack the fan and remove all parts from the package
b). Adjust the fan head to the up or down position. and then tighten the
fastening screw
c). Use the fastening nut for the back grill to attach the back grill to the
fan head. and then use the fastening nut for the fan leaf to hold the fan leaf
in place) To attach the front grill to the back grill. you must use the grill
ring carefully to hold them together and fasten the grill and with the screw
provided.
Operating Instructions
Before using the fan make sure that it is on a flat and stable surface. Damage may occur if It Is placed on an incline or decline.
- Set all the switches to the OFF position. and then insert the plug directly into a standard AC socket-outlet. Be sure to plug Ms tightly into the outlet.
- Gently touch the button ‘ON/SPEED” to start the fan and select your desired fan speed.
- Set the time by gently touching the knob -TIMER’ to select the desired timing level. the range is between 0-2 hours.
- If you want to enlarge the blast area in your room, pull the button’OSCILLATION’ on the head cover and the grill will oscillate; blast your room in large scope. To stop oscillating, just push the button ‘OSCILLATION- .
- To completely shut the fan off, first touch the button-OFF’ once, and then remove plug from the socket outlet.
Cleaning I Maintenance Instructions
To safely take care of your fan, please remember to follow these instructions below:
- Always remove the plug from the socket-outlet, and allow the fan to slop completely before cleaning the fan.
- Do not allow water to drip on. or enter into the fan housing.
- Always use a soft cloth, moistened with a mild soap solution.
- Do not use any of the following agents as a cleaner: Gasoline. Thinners. or Benzene.
- In case of malfunction or doubt, do not try to repair the fan yourself. it may result in a fire hazard or electric shock.
FAN Cleaning
Clean the fan grill, housing and base with a soft damp cloth. Do not attempt to remove the fan blades. Please use caution around the motor housing area. Do not allow the motor. or other electrical components to be exposed to water.
FAN Storage
When storing your fan in the off-season, it is important to keep it in a safe dry location. It is important to protect the fan head from any dust. We strongly recommend using the original box, when storing the fan away.
Specifications
MODEL NO | RATED VOLTAGE | RATED POWER |
---|---|---|
COM-18BK | 220-240V— 50Hz | 60W |
PLEASE FILL YOUR DETAILS FOR FUTURE use
GUARANTEE CARD
CUSTOMER’S DETAILS
NAME OF BUYER……………..
ADDRESS…………
TELEPHONE…………………………
DETAILS OF SHOP
NAME OF SHOP………..
RECEIPT VOUCHER NO………………….
DATE OF PURCHASE……………………….
APPLIANCE DETAILS
TYPE OF APPLIANCE…………
MODEL NO………………..
SERIAL NO……………………………..