Dreo DR-HTF003 Cruiser Pro Tower Fan User Manual
- June 8, 2024
- DREO
Table of Contents
Dreo DR-HTF003 Cruiser Pro Tower Fan
Introduction
The easy-to-touch smart design makes it more convenient to use, allowing you
to easily customize your airflow and cooling needs for a child’s room,
bedroom, or home office. Choose between 4 speeds, 3 modes (Normal, Natural, or
Sleep), and remotely control the strength and oscillation from your bed or
sofa. With a perfect 90° oscillating cooling fan, you can focus airflow in the
desired areas. More efficient air flow distribution throughout the space is
provided by the wide-angle oscillation and lengthy wind curve. With a built-in
timer that can be adjusted from one to twelve hours, this powerful yet silent
floor fan will emit only 40dB of noise, which is low enough to not interfere
with your sleep. This will allow you to get a nice night’s rest or take a cool
nap on warm summer nights (the light turns auto-off after 30s in sleep mode)
Designed with a thin fence so as not to threaten children, a stable stand base
that resists falling or tripping, and a fused safety plug that guard against
damage from over-voltage and power surges, the bladeless oscillating fan is
ETL-certified. Due to its compact base and body, the quiet standing fan can
fit into any room corner and is portable for use in a house, RV, or workplace.
It is also easy to transport thanks to the handy carry handle.
SAFETY WARNING
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE
USE
When using the fan, the following basic Instructions should always be followed
to reduce the risk of tire, electric shock, and Injury to persons, including
the following:
- Read and save these instructions
- This appliance has a polarized plug lone blade is wider than the other). To reduce the risk of electric shock. this plug is intended to fit in a polarized outlet only one way, If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- This unit should be placed on a smooth floor and the power cord can’t be close to heating appliances.
- Please check the consumption voltage applied with this unit This unit’s consumption voltage is 120V AC, 60Hz.
- Please don’t use such a power cord: too long, and damaged. Before use, the power cord can’t be pushed by force to avoid damage. And if the power cord is too long, it is easy to produce fire electric shock, and other.
- Before assembly completes, please don’t use this unit
- if don’t use it, please cut off the power cord and keep apart the power supply.
- Please keep your hands dry when connecting the power supply.
- Please don’t put your fingers, pencil, and other things into the grill when the blades are operating.
- Unplug or disconnect the appliance from the power supply before cleaning.
- Don’t let this unit immerse into water, oil, basically, acidity high-temperature conditions.
- Please note not to cover by window curtain or others to avoid the blades draw them.
- This unit doesn’t use in outdoors.
- Please don’t use insecticide on the unit, or the resin and paint is easily to be damaged.
- Please don’t use it directly in a long time when having little baby, patient, old man.
- Store the fan in a clean dry place when not in use.
- WARNING: Chemical Bum Hazard. Keep batteries away from children.
- WARNING: To reduce the risk of fire or electric shock. Do not use this fan with any solid-state speed control device.
FOR HOUSEHOLD USE ONLY
READ AND SAVE THESE INSTRUCTIONS
PACKING DETAILS
- 1 x OREO Tower Fan Body
- 1 x Front Fan Base
- 1 x Rear Fan Base
- 4 x Thumbs Screws
- 1 x Remote Controller
- 1 x CR2025 Type Lithium Battery Installed In The Remote Controller)
- 1 x Use Guide
- 1 x Quick Start Guide
FUSED SAFETY PLUG – FOR US ONLY
This fan features a fused safety plug which is designed to cut off electric current into the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.
USER SERVICING INSTRUCTIONS
-
If your fan loses power and you suspect that the fuse on your fan has blown, grasp the plug and remove it from the receptacle or another outlet device. Do not unplug by pulling on the cord.
-
Slide fuse cover, located on the top of the plug, towards the prongs of the plug.
-
carefully remove the blown fuse and snap a new fuse into place. Fully close the fuse door by sliding it back Into place. Discard the blown fuse. The plug should now be ready for normal use.
-
Slide fuse cover, located on the top of the plug, towards the prongs of the plus.
-
To Reduce the Risk of Fire, do not replace the attached plug. Contains a safety device! fuse) that should not be removed. Discard the product If the attached plug is damaged.
-
If you need further information on how or when to replace the fuse in the safety plug, please contact Customer Service for support.
ASSEMBLY INSTRUCTIONS
STEP 1 Do not operate the tower fan without the base. The tower fan base is composed of two pieces(Front Base and Rear base The base needs to be connected together prior to attaching it to lathe tower fan Al<:Jn, and then insert, the plastic pegs of the BASE BACK with the holes on the BASE FRONT until both pieces snap together.
STEP 2 Now that the base is connected together, add the screw and rotate It clockwise to secure the base.
STEP 3 Gently pressing the wire into the clamps, Your tower fan Is row ready for use.
CONTROL PANEL/ REMOTE CONTROL
-
STYLE
Wind Mode Control, Auto Mode Control. -
SPEED
Fan Speed Control. -
POWER
Power Control, LED Display Control. -
TIMER
17mer Setup, Timer Running Status. -
OSC
Oscillation Control. -
MUTE
Beep On/ Off Control.
POWER
Press POWER to tum the fan on or off. The fan will restore to the speed of
the most recent use.
REMARK: The timer and auto feature will not be restored.
LED DISPLAY CONTROL Press POWER for 3 seconds to turn the LED display on or off.
STYLE Change the wind mode, NORMAL , NATIJRAL SLEEP .
NORMAL 4-speed levels.
NATIJRAL 4 speed levels. simulate a natural breeze controlled by a designed fan speed algorithm.
SLEEP 4-speed levels. Fan speed will decrease from the current setting every thirty minutes until it reaches speed level 1. And LED display will be off after 20 seconds.
AUTO FEATURE Press and hold STYLE for 2 seconds to turn the Automatic control feature on or off AUTO will be lighted accordingly.
WHEN AUTO FEATURE IS ON Fan speed will adapt to the temperature of the surrounding environment.
SPEED
Fan speed control.
OSC
Turn the oscillation feature on or off.
TIMER
Press TIMER to set a timer or to display the timer running status while
the timer Is working. The temperature will be displayed Instead of the timer
after 20 seconds Turn off the timer, Press TIMER repeatedly and select OH, or
Press POWER tum off the fan and turn it on again. Display timer running
status, Press TIMER to display timer running status while timer is working.
MUTE (REMOTE CONTROL)
Turn the beeping that occurs you press a button on or off and MUTE will be lighted accordingly.
SPECIFICATIONS
- MODEL: DR+ffF003
- RATED POWER: 55W
- INPUT: 1AC 120V60HZ
BATTERY REPLACEMENT
- Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
- Remove the battery holder by pressing the locking tab A with your thumb and pulling it out as per arrow B.
- Replace the battery with the same type ICR2025 Type Lithium Battery), making sure the (+) side facing up.
- Gently push in the holder until securely locked into place.
WARNING CHEMICAL BURN HAZARDS KEEP BATTERIES AWAY FROM CHILDREN.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment If the battery compartment does not close securely, stop using the product. remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The cells shall be disposed of properly. including keeping them away from children: and Even used cells may cause injury.
CLEANING AND STORAGE
- Ensure the fan is turned off and unplugged.
- Use only a soft cloth to gently wipe the outer surfaces of the fan clean. To clean between the grills and fan blade area, we recommend using a pipe cleaner, flexible dust wand, vacuum cleaner or compressed air to gently remove the dust.
- To clean the rear grill use a soft dry cloth.
- DO NOT Immerse the fan In water and never allow water to drip into the motor housing.
- DO NOT use gasoline, paint thinner or other chemicals to clean the fan. For storage, you may leave the fan assembled and covered to protect it from dust.
- Store the fan in a cool, dry place.
FAQs
How to set the timer?****
Press the “Timer” button for 3 seconds, then the LED light will flash for 3 seconds and automatically enter into the timer setting mode. Press “Up” or “Down” button to adjust the time, and press “Timer” button to confirm.
How to set the fan speed?****
Press the “Speed” button for 3 seconds, then the LED light will flash for 3 seconds and automatically enter into the speed setting mode. Press “Up” or “Down” button to adjust the speed, and press “Speed” button to confirm.
How to set the oscillation mode?****
Press the “Mode” button for 3 seconds, then the LED light will flash for 3 seconds and automatically enter into the oscillation mode setting mode. Press “Up” or “Down” button to select from Normal Mode, Natural Mode, or Sleep Mode. Press “Mode” button to confirm.
How to set up a wireless connection between two Dreo fans?****
Please follow these steps: 1) Turn on both fans; 2) Open Dreo app; 3) Tap on “+”; 4) Select a fan from a list of available Dreo fans; 5) Tap on next; 6) Select another fan from a list of available Dreo fans; 7) Tap on next; 8) Both fans will be connected now.
How to reset my Dreo fan?****
Please follow these steps: 1) Hold down both buttons (Fan Speed and Timer); 2) While holding down both buttons, plug in your fan; 3) Release both buttons after you hear two beeps (one when you plug in your fan, second one when you release both buttons); 4) Your fan will reset itself and go back into pairing mode.
What is Dreo app?****
The Dreo app is free application that allows you to control your Dreo fan with your smartphone. Download it from Google Play or App Store and install it on your device.
What are benefits of using remote control?****
You can control your Dreo fan from anywhere in your home with just one tap on screen of your smartphone. You can also change modes or adjust speed without leaving your sofa or bed.
What is Remote Control Range?****
Remote control range is 10 meters (33 feet).
What is 90 degree oscillation angle?****
90 degree oscillation angle allows you to focus airflow in desired areas and provides more efficient air flow distribution throughout space.
Is there a way to set the temp? I have no ac and hoping I found what I need?****
When I turn the fan on it displays the room temperature, but reading through the directions I do not see a way to set the temperature. You can set the speed to three different modes. It works quite well to cool off a room, but keep in mind it’s not an air conditioner. I have seen products that do work almost like an air conditioner. You may want to look in that direction. I hope this help you some.
Can you stop the rotation and have it blow in one direction?****
Yes, you can.
Does this cool well without an air conditioner?****
I have the company’s 36″ model. These are not air conditioners, but I’ve found that the 36″ model does a very good job of producing a cooling sensation, even at the second to lowest setting. At the highest setting it puts out a much stronger breeze than I had thought it would. I can enthusiastically recommend these products.
I have to have my room pitch black when I sleep. can the led display be turned off while the fan remains on?****
When you choose the night mode with “moon” icon on led display, it will turn off the display but the fan is still on.
Do others have issues with the remote? I can only use it when it’s a 2 – 3 feet away and when the remote is above the control panel on the fan?****
I tried from a longer distance away, pointing at the side of the fan and the remote worked fine. Maybe try replacing the batteries or clearing anything in the way?
How much does it really weigh with box and everything?****
It’s pretty lightweight. As a small-frame female, I was able to carry it in one hand easily.
Video
Download PDF Link;DR-HTF003-User- Manual_V1.0_21-07-20