PAC LPA-E4 4 Channel Line-Output Converter Instruction Manual
- June 5, 2024
- PAC
Table of Contents
LPH Harness Instruction Guide
Wiring Connection Chart (All Models)
MODELS:
- LPA-E4
- LPA2.4 / LPA2.2
- LPA1.4 / LPA1.2
Important Note: This harness is provided with an inline fuse installed.
Please remove prior to installation and reinsert once finished.
If your vehicle does not provide an ACC source your harness will not have a
“RED” wire to connect.
It will use DC Offset to turn on as well as trigger the “REM OUT” on the LPA.
On LPA-E4 there will be a jumper that you can move based on your application.
This harness is designed to work on OEM NON-AMPLIFIED systems. Connect the RED
BUTT Connector to the aftermarket system turn on for your amplifiers.
| Wire Color | Function |
|---|---|
| Yellow | Constant 12V + |
| Black | Ground |
| Red | ACC / Rem Input |
| Blue/White | Amp Turn On + |
| White | Front Left ÷ |
| White/Black | Front Left – |
| Gray | Front Right + |
| Gray/Black | Front Right – |
| Green | Rear Left + |
| Green/Black | Rear Left – |
| Purple | Rear Right + |
| Purple/Black | Rear Right – |
Example Installation – 4-Channel Amplifier – (HARNESS CUT REQUIRED)
- Cut the harness close as possible to the “CUT HERE AND INSULATE” label. You must insulate wires to prevent damage to OEM radio.
- The cut speaker wires will need to be connected to your aftermarket amplifier. (REFER TO LABEL ON HARNESS)
- Please refer to the chart on the first page for wiring your loose wires to your LPA.
- This harness is designed to work on OEM NON-AMPLIFIED systems.
Example Installation – Mono Amplifier – (HARNESS CUT NOT REQUIRED)
- If using a 2-Channel input LPA use the front speaker wires and insulate the remaining rear speaker wires.
- DO NOT CUT the speaker wires in between the “CUT HERE” Labels in order to keep the factory speakers functional.
- This harness is designed to work on OEM NON-AMPLIFIED systems.
© 2021 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP
Global.
PAC-audio.com
Rev.7
1/5/2022
Documents / Resources
| PAC
LPA-E4 4 Channel Line-Output
Converter
[pdf] Instruction Manual
LPA-E4 4 Channel Line-Output Converter, LPA-E4, 4 Channel Line-Output
Converter
---|---