Snapmaker J1 3-in-1 3D Printer User Manual

June 5, 2024
snapmaker

Snapmaker J1 3-in-1 3D Printer

Snapmaker-J1-3-in-1-3D-Printer

Foreword

Before using your Snapmaker J1, make sure to read thoroughly and understand the Safety Guidelines. Failure to follow the safety instructions may result in personal injury, inferior results, or damage to the product.

In the Box

  1. Snapmaker J1 3D Printer × 1
  2. Quick Start Guide × 1
  3. Safety Guidelines × 1
  4. Calibration Card × 1
  5. Filament × 2
  6. Left Door × 1
  7. Right Door × 1
  8. Side Panel × 2
  9. PEI Glass Plate × 1
  10. Tool Box × 1

Snapmaker-J1-3-in-1-3D-Printer-1

  • USB Flash Drive × 1
  • Wire Brush × 1
  • Power Cable × 1
  • Glue Stick × 1
  • Palette Knife × 1
  • Tweezers × 1
  • Diagonal Pliers × 1
  • Filament Holder × 2
  • USB-B Cable × 1
  • Hex Key × 4
  • Open-end Wrench × 1
  • M3 × 6 Screw × 16
  • M4 × 10 Screw × 4
  • Hot End Sock × 2
  • Wiping Cloth × 1

Installation

Place the Printer Horizontally Snapmaker-J1-3-in-1-3D-
Printer-2

Install Filament HoldersSnapmaker-J1-3-in-1-3D-
Printer-3

Install Side PanelSnapmaker-J1-3-in-1-3D-Printer-4

Install DoorsSnapmaker-J1-3-in-1-3D-Printer-5

Install the PEI Glass PlateSnapmaker-J1-3-in-1-3D-
Printer-6

Connect the Power CableSnapmaker-J1-3-in-1-3D-
Printer-7

Using the Printer

Turn on the printer.

Follow the guidance of the Touchscreen to set up your printer.

  • Complete the general settings.
  • Follow the Wizard to complete the steps needed to start a print.

Starting a Print

  • Download Lava Studio at https://support.snapmaker.com and install it on your computer.
  • Slice your model and generate the G-code file in Lava Studio. Snapmaker-J1-3-in-1-3D-Printer-11
  • Send the G-code file to the printer via Wi-Fi or USB flash drive.
  • On the Touchscreen, tap the blank area in the home screen to select the file to print. 

Resourses

A detailed User Manual is available on our Support website: Select Snapmaker J1 > Go to User Manual. https://support.snapmaker.com
The latest version of this guide is on our Support website: Select Snapmaker J1 > Go to Quick Start Guide. https://support.snapmaker.com
We are here for you whenever you need general information or technical support: support@snapmaker.com 
Purchase spare parts and materials: https://shop.snapmaker.com.
Share anything you want with other Snapmaker users in our community: https://snapmaker.com/communitySnapmaker-J1-3-in-1-3D-
Printer-14

Copyright © 2022 Snapmaker. All rights reserved.
These language versions of the guide are verified by the manufacturer (Original Instruction).

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals