BaByliss AS81E Hot Air Brush Instruction Manual
- June 5, 2024
- BaByliss
Table of Contents
BaByliss AS81E Hot Air Brush
Please read the safety instructions before use.
PRODUCT FEATURES
- 38mm thermal brush with ceramic coating
- 20mm round boar-bristle brush
- Power 800W
- 2 speeds/ temperatures + ‘cool air’ setting
- Hinged rear filter for easy maintenance and extended life of the unit.
- Swivel cord
FITTING AND REMOVING THE ATTACHMENTS
Fit the brushes onto the body of the unit by lining up the guides on the two
parts and then press the two together until you hear a click.
To remove an attachment, press on the unlocking buttons located on the sides
of the unit and gently pull the attachment off.
USE
- The brush has 3 settings: 0 (off), I (low) and II (high). The low setting is ideal for fine hair, the high setting for thicker hair.
- The cool position lets you to fix the styling for really long-lasting effects.
- Use your hot-air brush on pre-dried, slightly damp hair that is completely tangle free.
- Use clips to separate hair so that you can work on one section at a time. Start with the sections underneath. Sections should be a maximum of 2cm
- wide and as even as possible. Always work from the roots to the tips and slide the brush slowly down the length of the section.
THE 38MM THERMAL BRUSH WITH CERAMIC COATING FOR PERFECT GLIDE AND TO OFFER
YOUR HAIR BETTER PROTECTION
The combination ‘brush/hair dryer’ will revolutionise your blow drying!
This ideal diameter, recommended by BaByliss, creates a smooth movement and
adds body to your hair without tangling it and for the best blow-dry results
for hair full of softness.
The hot air of the unit heats the metal barrel of the attachment. The heat is
thus distributed directly over your hair making it soft and smooth.
THE 20MM ROUND BOAR-BRISTLE BRUSH
This size is more specially suited for the finishing touches: this brush will
accentuate the shaping of certain sections like the fringe, the tips or the
roots.
The use can also vary according to the length of your hair:
- on short hair, it can be used horizontally, like the thermal brush, for gentle and natural blow-drying with the ends flicked out or turned under
- on long hair, it can be used vertically for a spiral curl effect at the tips
MAINTENANCE
- Unplug the unit and allow to cool completely before cleaning or storing.
- We advise you clean brushes regularly to avoid build-up of hair, styling products, etc. Use a comb to remove hair from the brushes. Use a dry or very slightly damp cloth for the plastic and ceramic surfaces.
BABYLISS
99 avenue Aristide Briand 92120 Montrouge France
www.babyliss.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>