Fleetpoint OBDII utilizare GPS Tracker User Manual

Fleetpoint OBDII utilizare GPS Tracker

Overview

Appearance

LED indications

power indicator(red)

No ligh

| ower off/low battery /internal fault/sleep mode

GSM indicator(green)

GPS indicator(blue)

SIM card installation

Open the lid
please insert the pry piece in the box to the shell on either side of the open lid hole according to the direction as the picture shows, the upper lid will off the lower lid. Next insert the other side of the open lid hole, and press and gently pry open following the direction shown in the picture. If this is still not open, repeatedly push both sides to separate the upper and lower lid. After the lid is removed, install the SIM card and follow the installation method (please see 3.3 SIM card installation).

Close the lid
When closing the lid, be sure that the positioning semi-circular hole is in the same direction as the semi-cylinder of the upper lid. Closing the lid violently in the wrong direction will cause damage to the equipment.

SIM card installation

Please purchase the right SIM card.

Install SIM card

Insert the SIM card in the correct direction. Push the card cover to the LOCK direction and make sure to lock it.

NOTE

1. When the SIM card is inserted, the device will use the backup battery to power on. If the charge of the internal battery is low, please insert the device into the OBD interface of the car to take electricity.
2. Terminal SIM cards should be inserted in the correct direction. SIM cards should have GPRS service. If SIM PIN is required, please turn off the SIM PIN function. Please ensure that the terminal SIM card charges sufficiently.

Boot up/power off

Boot up
After inserting the SIM card, the device will power on by using the backup battery. When the device is inserted into the OBD interface, the internal battery will be charging.
Power off
After unplugging the device from the OBD interface, then removing the lid and taking off the SIM card, the device will shut down.

Functions

The following features can be configured through the terminal platform or APP provided by the dealer.
SOS number

• Add SOS number Via SMS command Send SMS command: SOS, A,number1 ,number2,number3 #(A means add number). You could set 3 SOS numbers in maximum. If set successfully, the terminal will reply “ok”.  e,g. SOS,A, 13510 …. 60,135116 …. 6,136126 …. 8# (set all 3 SOS numbers)
• SOS,A, 13510 …. 60# (set the first SOS number)
• SOS,A, , 135116 …. 6# (set the second SOS number)
• SOS,A, , ,136126 …. 8# (set the third SOS number)

Delete SOS Numbers
Send SMS command: SOS, D, 1,2,3# (D means delete SOS number)  e.g. SOS, D, 1 # means to delete the first number SOS, D,3# means to delete the third number If you do not know the sequence number, you can also delete the number by SMS command like this: SOS, D, number# e.g. SOS, D, 13527852360# means delete this SOS number directly. It will reply “OK” if the number is deleted successfully.
Add SOS numbers via the platform
You can set the SOS number via the platform after activating the terminal.

• Plug out alarm
  When the device is unplugged from the car, the device will send
  “unplug alert” message to the platform or SOS numbers

• Power cut-off alert
  When the electricity supply of the device is cut off, it will activate the power cut-off alarm. Then the device will send a “power cut-off alert” message to the platform or SOS numbers.

• Low battery alert
  If the device uses a backup battery to work, the device will send a low battery alert to the platform when the battery is low.

• Geofence alert
  After setting the fenced area on the platform and selecting the trigger conditions of the alarm, the device will send correspong­ding in and out an alert to the platform according to the trigger conditions when the device enters and exits the gee-fence.

• Overspeed alert
  The car speed threshold can be set by platform or SMS. When a vehicle speed over the set threshold, the Overspeed alert will be triggered. NOTE: Off by default, on / off on the specified platform or phone client.

Platform operation

Get registered on the designated service platform/ APP by an authorized dealer, then you can start the tracking service and settings.

Troubleshooting

If you are having trouble with your device, try these troubleshoot­ing procedures before contacting a service professional.

Warranty instructions and service

1. The warranty is valid only when the warranty card is properly completed and upon presentation of the proof of purchase consisting of the original invoice indicating the date of purchase, model, and serial No. of the product.
   We reserve the right to refuse a warranty if this information has been removed or changed after the original purchase of the product from the dealer.

2. Our obligations are limited to repair of the defect or replacement of the defective part or at its discretion replacement of the product itself. Warranty instructions and service

3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unauthorized service center.

4. Repair or replacement under the terms of this warranty does not provide the right to extension or renewal of the warranty period.

5. The warranty is not applicable to cases other than defects in material, design, and workmanship.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>