Gude BS 76-800 E Belt Sander Instruction Manual
- June 5, 2024
- Gude
Table of Contents
BS 76-800 E Belt Sander
Instruction Manual
58129
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
** Please read the instructions carefully before starting the machine.
TARTING-UP THE MACHINE
Translation of the EC-Declaration of Conformity
DELIVERY RANGE**
Starting-up the machine
Operation
START-STOP
Cleaning / Maintenance
Starting-up the machine
|
---|---
58160|
Starting-up the machine
**START 1 sec
**
START-STOP
Operation
Cleaning / Maintenance
Technical Data
| Belt sander | BS 76-800 E |
|---|---|
| Art. No | 58129 |
| Service connection | 230 V ~ 50 Hz |
| Rated input | 800 W |
| Belt speed no load | 0 – 300 m/min |
| Sanding surface | 76 x 142 mm |
| Belt size | 76 x 457 mm |
| Weight | 2,65 kg |
Noise details
Sound pressure level LpA| 93 dB (A)
Sound power level LWA| 104 dB (A)
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) deter- mined according to EN
60745:
Vibration emission value ah| 3,09 m/s²
Uncertainty K = 9,810 m/s²
WARNING: The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the
times when the tool is shut down or when it is running but not actually in
use. This may significantly reduce the vibratory load over the total working
period. Identify additional safety measures to protect the operator from the
effects of vibration such as: maintaining the tool and the accessories,
keeping the hands warm, and organization of work patterns.
** Read and understand the operating instructions before using the
appliance. Familiarise yourself with the control elements and how to use the
appliance properly. Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appliance. An exception
includes youngsters trained in order to reach knowledge under the supervision
of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our
customer center
Specified Conditions Of Use
The belt sander can be used for sanding wood, plastics, and metal. Do not use
this product in any other way as stated for normal use. Not observing general
regulations in force and instructions from this manual does not make the
manufacturer liable for damages.
Emergency procedure**
Conduct a first-aid procedure adequate to the injury and summon qualified
medical attendance as quickly as possible. Protect the injured person from
further harm and calm them down. If you seek help, state the following pieces
of information: 1. Accident site, 2. Accident type, 3. A number of injured
persons, 4. Injury type(s).
Symbols
| **** | WARNING / Caution! |
|---|---|
| **** | Read the operating instructions to reduce the risk of injury. |
| Wear eye protective goggles! Wear ear protectors! | |
| Wear a suitable dust protection mask. | |
| Wear gloves! | |
| Unplug the machine before any work on it | |
| Class II tool. | |
| **** | CE marking |
| **** | Any damaged or disposed electric or electronic devices must be |
delivered to an appropriate collection center
WARNING Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
Belt Sander safety warnings
Hold power tool by insulated gripping surfaces, because the belt may
contact its own cord. Cutting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing loss.
Use protective equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as dust masks,
protective gloves, sturdy non-slip footwear and ear defenders.
Do not reach into the machine while it is running. Chips and splinters must
not be removed while the machine is running.
The dust produced when using this tool may be harmful to health. Do not inhale
the dust. Use a dust absorption system and wear a suitable dust protection
mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g. asbestos).
When grinding metal, flying sparks are produced. Take care that no persons are
endangered. Because of the danger of fire, no combustible materials should be
located its vicinity (spark flight zone). Do not use dust extraction. Do not
let any metal parts reach the airing slots – the daa nger of short circuit!
Mains Connection
Operation is only allowed with a safety switch against stray current (RCD max.
stray current of 30mA).
Connect only to single-phase AC system voltage as indicated on the rating
plate. It is also possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
Only plug in when the machine is switched off.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may only be performed by
qualified authorized staff. Use only original accessories and original spare
parts. Keep the device, in particular the air vents, clean at all times. Never
spray water on the device’s body! Do not clean the plastics with solvents,
flammable or toxic fluids. For cleaning, use a damp cloth only. Caution! If
the power cord of the appliance gets damaged, it must be replaced by the
manufacturer or its customer service or a similarly qualified person to avoid
danger. Only a regularly maintained and treated appliance can serve as a
satisfactory aid. Insufficient maintenance and care can lead to unforeseen
accidents and injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned
appliances correspond – at the type of construction being launched – to the
appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration
expires.
Belt sander
Appropriate EU Directives
| 58129 | BS 76-800 E |
|---|---|
| 2006/95/EC | 2004/108/EC |
| 2009/105/EC | 1907/2006/EC |
| 2011/65/EC RO | 2009/142/EC |
| 89/686/EEC (P | 1935/2004/EC |
| 2006/42/EC | |
| Annex IV | Name: |
| Notified Body | Address: |
| No |
Type Ex. Cert.-No.:
97/68/EC
Emission No:
2000/14/EC_2005/88/EC
Method of compliance assessment
Annex V
Wolpertshausen, 16.04.2015
Harmonised standards used
EN 60745-1:2009+A11:2010
EN 60745-2-4:2009+A11:2011
ZEK 01.4-08
EN 55014-1:2006/+A1:2009/+A2:2011
EN 55014-2-1997/+A1:2001/+A2:2008
EN 61000-3-2:2006/+A1:2009/+A2:2009
EN 61000-3-3:201 3
Guaranteed sound power level
104 L dB (A)
Measured sound power level
Managing Director
Joachim Bürkle
GÜDE GmbH & Co. KG, Birkichstraße 6, 74549 Wolpertshausen, Germany.
Authorized to compile the technical file
GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail: info@guede.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>