Goldair 12L Dehumidifier with WIFI User Manual
- June 5, 2024
- GOLDAIR
Table of Contents
GD415 20L Dehumidifier with WiFi
Instruction Manual
General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this appliance. Covering this appliance
presents a fire risk and will activate the safety fuse; permanently disabling
the unit.
WARNING: Do not use this appliance in small rooms when they are occupied
by persons not capable of leaving the room on their own unless constant
supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any
flammable material a minimum distance of 1 meter from the air outlet.
- Use only the voltage specified on the rating label of the appliance.
- Keep all objects at least 1 meter from the front, sides, and rear of the appliance.
- This appliance is intended for household use only and not for commercial or industrial use.
- Indoor use only.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or injury.
- Do not use the appliance if it has been dropped or damaged.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Never use the appliance to dry clothes.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
- Do not use it if there are visible signs of damage to the appliance.
- Do not connect the appliance to the main supply until completely assembled and adjusted.
- Ensure hands are dry before handling the plug or main unit.
- Ensure the appliance is on a flat, stable, heat-resistant surface.
- Do not operate with the cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
- Carry out regular checks of the supply cord to ensure no damage is evident
- Do not operate this appliance with a damaged cord, plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service, or repair.
- Do not twist, kink, or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high-wattage appliances.
- A correctly specified, undamaged extension cord may be used with this appliance provided it is used in a safe manner.
- Do not remove the plug from the power socket until the appliance has been switched off.
- Do not remove the plug from the power socket by pulling the cord; always grip the plug.
- Do not place a cord under the carpet or cover it with rugs or furniture. Arrange the cord so it cannot be tripped over.
- Don’t place appliances on bedding or on thick & long carpet where the openings may get blocked.
- Switch off and use the handle provided when moving
- Do not place the appliance close to a radiant heat source.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
- Do not sit on the appliance.
- Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
- Do not operate in areas where petrol, paint, or other flammable liquids are used or stored.
- Do not use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids.
- The appliance must not be immersed in any liquids.
- There are no user-serviceable parts installed in the unit.
- Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
- If your appliance does not work or is not working properly, contact the place of purchase or the Customer Services Team.
DO NOT COVER
Model No: GD415
Supply: 220-240VAC 50Hz
Rated Input Power: 320W (27°C/60%RH)
Max Rated Input Power: 420W (32°C/90%RH)
Rated Input Current: 1.48A (27°C/60%RH)
Max Rated Input Current: 1.91A (32°C/90%RH
Unit Capacity: 20Uday max (30°C/80%RH)
Water Tank Capacity: 3.5L
Suction Side Pressure: 1.2MPa
Discharge Side Pressure: 2.5MPa
Refrigerant/Charge: R290/60g
Sound Pressure Level: 48db(A)
Approval: TUV024729EA
MADE IN CHINA
QC PASSED
PO#-VVWYY
CUSTOMER SUPPORT
NEW ZEALAND
PH: 0800 232 633
| The appliance is filled with flammable gas R290.
---|---
| Before using the appliance, read the manual.
****| Before installing the appliance, read the installation manual.
| Any repairs required, contact the nearest authorized Service Centre and
strictly follow the manufacturer’s instructions only.
| Caution, risk of fire
WARNING: Appliance shall be installed, operated, and stored in a room
with a floor area larger than 4m².
Do not use any means to accelerate the defrosting process or to clean, other
than those recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating
ignition sources. (example: open flames, an operating gas appliance or an
operating electric heater).
Do not pierce or burn.
Be aware that refrigerants do not have any odor.
Operating Your Dehumidifier
Always choose a safe location for the dehumidifier, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the
dehumidifier.
WARNING: Keep all objects at least 200mm from all sides of the appliance.
WARNING: Do not use this dehumidifier with a programmer, separate timer,
remote-control system, or any other device that switches the dehumidifier on
automatically, since a fire risk exists if the dehumidifier is covered or
positioned incorrectly.
WARNING: Never leave this dehumidifier unattended.
Ensure the dehumidifier is on a flat, stable, heat-resistant surface.
Once the dehumidifier is in a safe operating position and all switches are in
the off position, insert the power plug into the mains outlet and switch it
on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will
overheat the plug and socket and could result in fire.
Leave the appliance to stand for one hour after transport or after the unit
has been on its side before connecting it to the mains supply to let the
refrigerant settle.
Ensure all external windows and doors are closed before turning on the unit.
Ensure that the water container is positioned correctly.
POWER BUTTON
Press this button to turn the appliance On or Off. When turned On, the
illuminating LED will automatically display the Relative Humidity of the room.
HUMIDITY SETTING
Relative humidity can be set from 30% to 80% (5% increments) by sliding your
finger along the touch-sensitive humidity setting bar. The dehumidifier will
turn off when the room reaches the set humidity.
The dehumidifier has a humidity indicator light on the front that will change
color depending on the humidity levels in the room.
Blue: Room humidity is lower than 50%
Green: Room humidity is between 50-70%
Red: Room humidity is above 70%
Note- there can be up to a 3% discrepancy on color changing.
MODES
The dehumidifier can be set to 4 modes:
- Normal Dehumidification: Allows manual setting of both fan speed and target humidity %
- Continuous Dehumidification: Automatically sets the fan speed to low. Target humidity % is disabled and the dehumidifier will run continuously.
- Ventilation: Adjustable fan speed. Target humidity % is disabled.
- Dry Clothes: For use in the laundry when drying clothes. Defaults to high fan speed. Target humidity % is disabled.
FAN SPEED
Press this button to select between low and high fan speed when in normal
mode.
TIMER
The appliance is fitted with a timer that will turn the unit on or off after
the desired set time has elapsed.
- Turn On Timer: When the dehumidifier is off, press the timer button repeatedly to select the desired number of hours between 1-24 hours before the dehumidifier turns on. The “Hr” light will illuminate when the time is set.
- Turn Off Timer: When the dehumidifier is on, press the timer button repeatedly to select the desired number of hours between 1-24 hours before the dehumidifier turns off. The “Hr” light will illuminate when the time is set.
SLEEP
The Sleep Mode allows you to turn off the bright LED display panel. Press the
Sleep button once to activate Sleep Mode, the button will illuminate and the
unit will continue
to operate, but the remainder of the LED display will turn off. If you would
like to adjust the settings whilst in sleep mode, press the relevant buttons
and the display will illuminate for 5 seconds and then return back to sleep
mode. Press the Sleep Mode button again to reset the LED control panel back to
normal.
DEFROST
When operating the unit, the evaporator will accumulate frost which will
affect the efficiency of the dehumidifier. When this happens the machine will
go into periodic defrost mode automatically and the indicator light will
illuminate.
During defrost mode; the dehumidifying function and air purification function
may run intermittently – this is normal. Do not switch off the unit when
running in defrost mode.
Note: Do not use the dehumidifier in temperatures less than 5º C.
Should the dehumidifier freeze up switch off the appliance, allow the
temperature to rise, and then restart.
TANK FULL INDICATOR
When the water tank is full, the dehumidifier will automatically stop
operating and the full water tank indicator will illuminate. Remove the water
tank carefully with both hands and discard the water. Replace the water tank
in the correct position. The dehumidifier will automatically begin operating
again.
Note: If the water tank is not installed correctly, the unit will not
operate. Always ensure that the water tank is installed correctly.
REMOVING AND EMPTYING THE WATER TANK
- To remove the water tank, gently pull the water tank out of the back of the dehumidifier.
- Empty the tank.
- Once empty, install the tank back into the back of the dehumidifier.
CONTINUOUS DRAINAGE
If you would like to use the dehumidifier over a long period of time you can
use the continuous drainage feature.
- Connect the drainage hose (supplied) to the drainage point of the dehumidifier.
- Reinstall the water tank.
- Feed another end of the drainage hose into a suitable drainage point.
Note: When using the continuous drainage feature, the hose must drain out
below the drainage outlet without knots or kinks.
Note: The water tank must still be installed for the continuous drainage
to work.
WiFi – Downloading and Setting up APP
This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your
phone is 2.4GHz capable
Note this dehumidifier will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.
Download the Goldair mobile APP
- Open the APP Store or Google Play on your mobile phone.
- Open “Search” and enter “Goldair”
- Click “GET” and begin to download and install.
Once downloaded to your phone open the APP
- Tap REGISTER near the bottom of the screen.
- Read and agree to the Privacy Policy.
- Add your email address.
- Tap “Obtain verification code”
You will then receive an email with a verification code.
- Enter the verification code from your email.
- Create a password.
- Then tap confirm.
If you haven’t received a verification code via email, tap the resend button,
and when the verification code is received follow the above steps.
Your APP is now registered and ready for pairing to your dehumidifier.
Pairing APP to Device
Details for pairing this heater to the Goldair App can be found at the below website link.
Either scan the QR code below or enter the website into your browser.
|
---|---
https://goldair.co.nz/goldair-app| https://goldair.com.au/pages/goldair-
app
Pairing Mode
To connect to the Goldair app you must ensure that your device is in pairing
mode which is where the Wifi Icon is flashing.
Most products will be in pairing mode after switching the device on but if it
is not:
- Put the device on STAND-BY mode (ON at the wall but the device is OFF)
- Hold down the “MODE” button for around 5 seconds or until the Wifi icon begins to flash.
Operating Your Dehumidifier
SAFETY DEVICES
This appliance has two protection devices:
- Resettable Thermal Link – this will automatically disconnect the power to the appliance at a pre-set overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate what is causing the appliance to overheat.
- Thermal Fuse – this disconnects the appliance permanently in case of overheating. (It is non-resettable).
CARE AND CLEANING
The dehumidifier requires regular cleaning to ensure trouble-free operation:
- Unplug the dehumidifier from the mains supply before cleaning and ensure that the dehumidifier has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
The air filter should also be cleaned regularly (every 2 weeks). To remove the filter:
- Place a finger in the recessed area at the base of the Air Outlet Filter and gently pull it towards you and then down, the filter will now be released from the unit.
- To dislodge any dust from the filter you can either tap the filter lightly over a dustbin or use a vacuum cleaner to remove all dirt.
- If the filter contains excessive debris which is hard to dislodge, you can remove the filter from the filter bracket and wash the filter in warm soapy water (using a neutral detergent), rinse well with clean water, and then leave until dry. Once the filter is dry, reinsert it into the filter bracket.
- Replace the filter back onto the unit and clip it into place.
- Use a damp cloth (not wet) to wipe the exterior of the dehumidifier to remove dust and dirt.
- Never use solutions such as petrol, thinners, or polishing agents.
- Ensure the dehumidifier is dry before plugging back into the main supply.
CARE AND CLEANING CONTINUED…
- The water tank should be cleaned every few weeks to prevent the growth of mold, mildew, and bacteria.
- Partially fill the tank with clean water and add a little mild detergent. Swish it around and then empty the tank and rinse.
Note: To thoroughly clean and dry the tank, remove the handle and lid to gain access to the inside of the tank. After cleaning, drying, and reassembling the water tank, reinsert it securely into the dehumidifier in order to restart the operation.
Troubleshooting
STORAGE
If you plan on not using your dehumidifier for a long time, store your
dehumidifier by following these instructions:
- Switch off the unit and unplug it from the main socket.
- Empty and clean the water tank.
- Clean the unit and the filters (Please refer to the Care and Cleaning section).
- Cover the unit and keep it in a dry place.
Problem | Possible Cause | Possible Solution |
---|---|---|
Both the fan and compressor are not working. | No power to the unit. | Check the |
mains’ power supply. Check the control panel is switched to “ON”.
Not collecting water.| Room temperature and humidity may be too low.| The
dehumidifier will not operate if the room humidity is already below the level
set.
The air intake filter may be blocked.| Clean the filter of any obstructions.
The unit is making a loud noise.| The floor may be uneven.| Re-position the
unit on an even stable surface.
Leaking from the unit.| The water tank may not be installed correctly.| Remove
the tank and re-fit correctly.
The unit may have frozen.| Unplug the unit and allow the temperature to rise.
PROOF OF PURCHASE
To receive a warranty retain a receipt as proof of purchase.
| SUPPORT AND TECHNICAL ADVICE
---|---
Goldair – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz| Goldair – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Two Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of two years. For non-domestic use, Goldair limits the voluntary warranty
to three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under the law in relation to the goods or services
to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand, this warranty is additional to the conditions and guarantees
of the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLD AIR (1300 465 324)
www.goldair.com.au
---|---
Goldair Two-Year Warranty (IMPORTANT: Please complete and retain this
warranty card)
Name ———————————
Address ——————————
Place Of Purchase ——————
Date Of Purchase ——————-
Name Of Product ——————
Model Number ———————
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>