saxby lighting 98451 StratusDisc CCT Surface Mount Accessory Instruction Manual
- June 3, 2024
- saxby lighting
Table of Contents
saxby lighting 98451 StratusDisc CCT Surface Mount Accessory
Thank you for purchasing this accessory. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please retain these instructions for future reference.
Installation
This surface mounted accessory is designed for use with the Stratus Disc CCT
lamp 98450. Please refer to the installation manual supplied with the fitting
for wiring and connection details.
Note that the switch is turned off before installation.
The ceiling surface must be flat and smooth to ensure a good fit.
-
Decide on the position of the luminaire. Then using back plate of this product as a template mark the position to drill out the fixing holes. Take care to avoid damaging any concealed wiring and pipes.
-
Setting the color temperature and wattage for Stratus Disc CCT lamp 98450 as per your necessary and wiring to refer the instruction manual supplied with the lamp.
-
Using the screws and ceiling plugs to secure the surface mounted accessory to the ceiling.
-
Removed the spring clips on both sides of the lamp 98450 then Upwards align accessory to fit. Push the lamp in position firmly, ensuring
that no cables are trapped. -
Switch on. Your light is now ready for use.
Safety information
For your safety, always switch off the power supply before cleaning.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>