Gude 94567 Snow Blower Instruction Manual

: June 5, 2024
: Gude

Table of Contents

Technical Data
Specified Conditions Of Use
Requirements for operating staff
Emergency procedure
Symbols
Safety instructions
Maintenance
Guarantee
Service
EC-Declaration of Conformity
Defects searching
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Gude 94567 Snow Blower Instruction Manual

Gude 94567 Snow Blower Instruction Manual

Please read the instructions carefully before starting the machine.

DELIVERED ITEMS

Gude 94567 Snow Blower Instruction Manual - What's in the
box

Assembly

Gude 94567 Snow Blower Instruction Manual - Assembly

Operation

Gude 94567 Snow Blower Instruction Manual - Operation

Technical Data

Gude 94567 Snow Blower Instruction Manual - Technical
Data

Read and understand the operating instructions before using the appliance. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. In case of any doubts about connection and operation refer please to our customer center

Specified Conditions Of Use

This appliance has exclusively been designed to be used as a snow blower for removing snow from paved roads and surfaces around house and in the garden. Respecting technical data and safety precautions.
Use the appliance only for removing light and loose snow (fresh snow) up to the maximum snow height of app. 10 cm. Icy snow and ice must not be removed by the snow blower.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Please be sure to know that our appliances have not been designed for industrial use.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.
Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.
Minimum age: Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third parties.
Observe to keep out of dangerous zone

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

Accident site
Accident type
Number of injured persons
Injury type(s)

Symbols

Safety instructions

WARNING! Electric shock! There is a risk of an injury caused by electric shock!
This device is not intended for use by persons (including children) with limited physical, sensory or mental capabilities or without the necessary lack experience or knowledge unless they are supervised by a person who is responsible for their safety or were instructed by that person in how to use the device. Children should be supervised to ensure that they do not play with the device. Always keep children and unauthorised persons out of reach of the appliance.

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).
before putting into operation, a qualified electrician must check whether electric safety measures required are in place. Any national regulations in this regard must be complied with. Electric connection to a socket. It is necessary to make sure the connecting socket was not near water and humidity and the plug was protected against humidity. Check the voltage. Technical data given on the type label must correspond with electric network voltage. Only use splash proof extension cables approved for outdoor purposes.

Check the cable and/or socket for damages before the appliance putting into operation.
To avoid danger, a damaged mains supply pipe must be replaced by the manufacturer. Do not under any circumstances attempt any repair yourself.

Never put parts of your body and clothes near rotating parts.

Read carefully the operating and maintenance instructions. Familiarise thoroughly with the controls and proper use of the appliance. You need to know how the appliance works and how controls can immediately be switched off.

Never let children work with the appliance. Never let adults work with the appliance unless they have been properly trained.
Keep all persons, especially small children, and pets out of reach of the place of your work.
being careful prevents slipping or falling, especially when reversing.

Check the ground on which the appliance is going to be used and remove any items that might be caught or thrown off by the appliance.
Wear gloves, protective glasses, closefitting winter clothes and solid shoes with a rough sole when working and providing maintenance.
Use a grounded socket with three wires for all units with electric driving engines or electric starters.

Set the working screw height so that it does not touch the surface with rubble or road metal.

Do not adjust the appliance when the engine is running (except for settings directly recommended by the manufacturer).
Snow should be removed only after adjusting the snow blower to the outdoor temperature when there are extreme temperature differences.

Immediate snow removing could lead to premature wear of the drive shaft and other extensions such as the rubber flap.

There is a risk of items being thrown off at eyes when working with power appliances. Protective glasses or a shield should always be used when operating, adjusting or repairing the appliance.

Do not put your hands and legs near the rotating parts. Keep a safe distance from the eject hole.
be extremely careful when running over or removing snow off brash entrances, footpaths and paths. be prepared for unexpected risks or moving vehicles.

When you hit a foreign item, switch the engine off, disconnect the cable from the spark plug and check thoroughly the snow blower for any damage and remove it if necessary the snow blower can be put into operation again and worked with now.

If the appliance starts abnormally vibrating, switch the engine off and search for the cause immediately. Generally, vibrations are a warning against operating failure.

Switch the engine off every time you stop operating the appliance, clean the working screw/rotor can/ eject tube and when executing repairs, adjusting and inspecting the appliance.

When cleaning, repairing and checking the appliance, make sure that the working screw/rotor and all moving parts are stopped. Pull the cable out of electric motors.

Never use the appliance inside rooms; to be used outdoors only.

Do not remove snow across slopes. be extremely careful when changing movement direction on slopes. Never try to remove snow on steep slopes.

Never use the snow blower when guards, sheets and other protection components are not installed properly.
Never use the snow blower near glass surfaces, cars, windows, pits, etc.; set the eject tube angle properly. Children and pets must be in a sufficient distance from the appliance.

Do not overload the appliance; do not try to remove snow too quickly.
Never use the appliance at a high travelling speed on a slippery surface. be careful when reversing.

Never aim the eject tube at bystanders. Do not allow anyone to stand before the appliance.

Disconnect the working screw/rotor drive when the snow blower is to be transported or when not being used.
Use only extensions and accessories approved by the snow blower manufacturer (e.g. wheel weights, counterweight, cabins, etc.).

The snow blower must only be used when appropriate visibility or good lighting is provided. Stand fast on the ground and hold the handle tight by hands at all times. Walk, never run.
Switch the engine off and unplug it if you are not working with the appliance or when leaving the appliance or adjusting, maintaining or repairing it.

The appliance should only be used when in a perfect state. Carry out a visual inspection before switching the appliance on. Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. Replace any damaged parts before the appliance is put into operation if necessary.

Maintenance

before carrying out any work on the machine, disconnect the plug from the socket.
Prior to every use, visually check the machine to rule out any defects, in particular on the power cable and the plug. The machine must not be used under any circumstances if the machine or the safety devices are damaged.
Use only original accessories and original spare parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

Guarantee

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:
Serial No.:
Art. No:
Year of production:

EC-Declaration of Conformity

GÜDE GmbH & Co. KG birkichstrasse 6, 74549 Wolpertshausen Deutschland
We, hereby declare the conception and construction of the below mentioned appliances correspond – at the type of construction being launched – to appropriate basic safety and hygienic requirements of EC Directives. In case of any change to the appliance not discussed with us the Declaration expires.
Electric snow blower GESF 260 #94567
Appropriate EU Directives 2006/95 EG, 2004/108 EG Harmonised standards used ISO/DIS 8437:2008 EN 60335-1:2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 EN 62233:2008 EN 55014-1:2006 + A1:2009 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-3-2:2006 + A1:2009 + A2:2009 EN 61000-3-3:2008