Rave SL3401 Outdoor Laser Light User Manual
- June 5, 2024
- Rave
Table of Contents
Rave SL3401 Outdoor Laser Light
WARNING DATA
Please note the warnings below that will ensure the safe and smooth operation of the device:
- Attention! Indicates useful information for special situations.
- Important! I ndicates important information to protect from laser incident or injury.
- Caution! Prevent damage or injury from incorrect operation.
- Laser! Laser radiation safety warning.
UNPACKING INSTRUCTIONS
After purchase, carefully unpack the carton, checking contents to ensure that
all parts are in good condition. Retain packing material and inform the place
of purchase immediately if any parts are damaged or missing.
Attention!
This manual contains important laser system safety and operation information.
To avoid laser eye injury and to avoid breaking the law, ensure you read and
understand all instructions prior to powering on the laser unit for the first
time. Keep this manual in a safe place for future reference.
Please check all accessories when unpacking the unit. Any incorrect use will
void warranty.
BOX CONTENTS
- 1x Outdoor LED & Laser Light
- 1x IR Remote
- 1x Mounting Stand
- 1 x Mounting Spike
- 1x Power Supply
- 1x User Manual
SAFETY INSTRUCTIONS
- To protect the environment, please try to recycle the packaging material as much as possible.
- Don’t throw this product away as general trash, please deal with the product in accordance with electronic product regulations in your country.
- Do not install near flammable objects.
- Do not use it when the maximum ambient temperature is higher than 40°C.
- Unplug the unit when it is not used for a long period of time or before replacing the bulb.
- Please use the original packing when the device is being transported.
WARNING!
KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN
- If swallowed a lithium button battery may to lead to serious or fatal injury in as little as 2 hours, due to chemical Durns and potential perforation of the esophagus Non-lithium button battery can cause serious injuries if it is swallowed or placed inside any part of the body.
- All button batteries must be kept away from children regardless if they are new or used.
- It you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advise.
- If your child is having difficulty breathing contact 000 (Australia) or 111 (New Zealand).
- Dispose of used button batteries immediately and safely out of the reach of children.
- A battery can still be dangerous even when it can no longer operate the device.
- As soon as you have finished using a button battery, put sticky tape around both sides of it.
- This will make it harder for children to swallow the button battery and avoid the risk of the battery catching fire.
- Immediately dispose of button batteries immediately out of reach of children, or recycle using a child-resistant container and take used cells to your local battery collection center.
LASER SAFETY WARNINGS
Class llla Laser is safe because of the blink reflex if not viewed through
optical instruments. As with Class 1, this applies to laser beams with a large
diameter or large divergence, for which the amount of light passing through
the pupil cannot exceed the limits for Class llla.
Warning! Under no circumstance should you attempt to open the protective
housing or operate the device if the aperture windows are damaged?
Caution! The Laser security measures are designed according to the
specific terms of the relevant international laser safety standards and has
the following laser safety protection means. Laser Safety Labels: The labels
in accordance with European/FDA standard are stuck to the device body.
PRODUCT INSTRUCTIONS
Attention!
All servicing to this laser display device requires the protective housing to
be opened and/or removed and so must be performed by a qualified technician.
Opening the protective housing voids the warranty.
INSTALLATION STEPS
INSTALLATION
TIPS
- The darker the area the Laser Light is being used in, the brighter the projection.
- Try to stay away from areas with street lights or other bright lights. If you are going to hang the product, for safety purposes it is recommended that your lights are properly mounted using a suitable hanging clamp and safety cable.
OPERATION PROCESS
This product operates in temperatures of -35°C to 35°C. There may be a slight delay in operating temperatures below 5°C. Please allow up to 10 minutes for the light to warm up and reach its full projection.
PRODUCT SPECIFICATIONS
Laser Power:
- Red:100mW
- Green: 20mW
- ED Power:3W
- Power Consumption: 16.8W
- Weight:390g
- Dimensions: 155(D) x 87(Dia.)mm (Excluding Stand)