Apps SMART LIFE App User Guide
- June 5, 2024
- APPs
Table of Contents
Smart_Life_app_manual_function3_20220401
HOW TO USE “SMART LIFE” APPLICATION:
How to download “Smart Life” application: Search for “Smart Life” application
in Google Play store or in App Store and scan the QR code on the package with
your smart device.
Open the application, if you are a new user, click on “Register”, if you
already have an account, click on “login with existing account”.
Enter your e-mail address, to which a security code will be sent. Enter the
security code, then set up a password consisting of 6-20 characters.
How to connect the lamp to a smart device: Open the application and click on
“+” in the upper right corner.
Push on “Add Device” Select Lighting on the left, and after that select
Ceiling lamp WiFi in case of Ceiling lamps, or Lightsource WiFi in case of
Lightscources.
Connect with your smart device to the Wi-Fi network you wish to use.
The Wi-Fi connection may request the password of your Wi-Fi network during the
configuration.
The Wi-Fi connection must be 2,4 GHz.
Some routers have a limit for how many smart items can be controlled through
them, this limit is usally 8 pcs.
Please turn on Bluetooth and GPS, this might only be required for the pairing.
Switch on the lamp. The lamp shows automatically with pulsing that it is ready
for pairing. If it is not pulsing a RESET is needed by switching 3xon-off the
lamp.
When the lamp is blinking, select in the application “Confirm the indicator
blinks or breathes”. Please select if it blinks quickly or slowly.
Pairing will be started and you will be able to use the lamp with your smart
device after it has been completed.
The remote control doesn’t need to be paired.
How to control the luminaire with the application: Dimmer button: luminous
flux and colour temperature setting Scene button: selection of lighting mode
settings Schedule: timing of luminaire lighting How to share the luminaire:
Editing>Share Device>Add sharing.
Enter the phone number of another smartphone or the e-mail address of another
user registered in the application you wish to share the control of the
luminaire with. RESET the lamp by switching 3xon-off the lamp until it starts
blinking, then the lamp is ready for pairing.
Remove Device: In the application inside the lamps menu select Edit in the
upper right, and after that choose the Remove Device at the bottom.